ERJ-S08J334V 330kΩ 1206 SMD Resistor Equivalent & Substitute Parts

Part Overview

The ERJ-S08J334V is a 330 kΩ ±5% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and industrial applications requiring corrosion resistance. The product is currently active and available in high volume (821 pcs in stock). Equivalent and substitute parts are necessary when the primary part is unavailable, when design requirements demand higher power ratings, improved tolerance specifications, or when alternative manufacturers' parts offer better lead times or cost optimization while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	330 kΩ
Tolerance	±5%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C to +155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08J334V is determined by strict adherence to the following parameters:

Critical Parameters (Must Match Exactly):

Resistance value: 330 kΩ
Package / Case: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±200ppm/°C
Operating Temperature Range: -55°C to +155°C
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: MSL 1

Allowable Variations:

Tolerance: ±5% or tighter (±1% acceptable as superior specification)
Power Rating: 0.25W or higher (0.667W, 0.75W acceptable as superior specifications)
Manufacturer: Different manufacturers acceptable if all critical parameters match
Features: Additional features (anti-sulfur, pulse withstanding, high voltage) acceptable; automotive AEC-Q200 rating acceptable but not mandatory for all substitutes
Product Status: Active preferred; "Not For New Designs" acceptable for legacy applications only

Substitute parts are grouped by power rating capability and tolerance specification, as these represent the primary design flexibility points while maintaining full electrical and mechanical compatibility.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power Rating	Package	Temp Coeff	Op. Temp Range	AEC-Q200	Product Status	Height (Max)
ERJ-S08J334V	Panasonic	330 kΩ	±5%	0.25W	1206	±200ppm/°C	-55°C to +155°C	Yes	Active	0.028" (0.70mm)
ERJ-8GEYJ334V	Panasonic	330 kΩ	±5%	0.25W	1206	±200ppm/°C	-55°C to +155°C	Yes	Not For New Designs	0.028" (0.70mm)
ERJ-P08J334V	Panasonic	330 kΩ	±5%	0.667W	1206	±200ppm/°C	-55°C to +155°C	Yes	Active	0.028" (0.70mm)
CR1206-JW-334ELF	Bourns Inc.	330 kΩ	±5%	0.25W	1206	±200ppm/°C	-55°C to +155°C	No	Active	0.030" (0.75mm)
CRCW1206330KJNEA	Vishay Dale	330 kΩ	±5%	0.25W	1206	±200ppm/°C	-55°C to +155°C	Yes	Active	0.024" (0.60mm)
CRCW1206330KJNEAHP	Vishay Dale	330 kΩ	±5%	0.75W	1206	±200ppm/°C	-55°C to +155°C	Yes	Active	0.026" (0.65mm)
KTR18EZPJ334	Rohm Semiconductor	330 kΩ	±5%	0.25W	1206	±200ppm/°C	-55°C to +155°C	Yes	Active	0.026" (0.65mm)
RMCF1206JT330K	Stackpole Electronics Inc	330 kΩ	±5%	0.25W	1206	±200ppm/°C	-55°C to +155°C	Yes	Active	0.028" (0.70mm)
RV1206FR-07330KL	YAGEO	330 kΩ	±1%	0.25W	1206	±200ppm/°C	-55°C to +155°C	Yes	Active	0.026" (0.65mm)

Engineering Selection Recommendations

Direct Equivalents (0.25W, ±5% Tolerance, Active Status): RMCF1206JT330K (Stackpole), CRCW1206330KJNEA (Vishay Dale), KTR18EZPJ334 (Rohm), and CR1206-JW-334ELF (Bourns) are functionally equivalent to the ERJ-S08J334V. All maintain identical electrical specifications and 1206 package dimensions. RMCF1206JT330K, CRCW1206330KJNEA, KTR18EZPJ334, and RV1206FR-07330KL carry AEC-Q200 automotive qualification matching the primary part. CR1206-JW-334ELF lacks AEC-Q200 rating but is suitable for non-automotive applications.

Enhanced Specifications (Higher Power Rating): ERJ-P08J334V (Panasonic, 0.667W) and CRCW1206330KJNEAHP (Vishay Dale, 0.75W) provide superior power handling while maintaining all other critical parameters. These are suitable for applications requiring thermal margin or higher dissipation capability within the same package footprint.

Improved Tolerance: RV1206FR-07330KL (YAGEO, ±1% tolerance) offers tighter resistance tolerance than the ±5% specification of the primary part, suitable for precision circuit applications where tolerance stack-up is critical.

Legacy Consideration: ERJ-8GEYJ334V (Panasonic) is marked "Not For New Designs" and should be used only in legacy system maintenance or when existing inventory must be consumed.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with higher power rating (0.667W or 0.75W) in place of the 0.25W ERJ-S08J334V?

A: Yes. Higher power ratings are acceptable substitutes. The 0.667W ERJ-P08J334V and 0.75W CRCW1206330KJNEAHP maintain identical resistance, tolerance, temperature coefficient, and operating temperature range. Higher power rating provides additional thermal margin without affecting circuit performance. Physical dimensions remain within 1206 package specification.

Q: Is the CR1206-JW-334ELF (Bourns) suitable for automotive applications?

A: CR1206-JW-334ELF lacks AEC-Q200 automotive qualification. It is suitable for industrial and consumer applications but not recommended for automotive designs requiring AEC-Q200 compliance. For automotive applications, use RMCF1206JT330K, CRCW1206330KJNEA, KTR18EZPJ334, or RV1206FR-07330KL.

Q: What is the difference between ERJ-S08J334V and ERJ-8GEYJ334V?

A: Both are Panasonic 330 kΩ ±5% 0.25W 1206 resistors with identical electrical specifications. ERJ-S08J334V is currently Active. ERJ-8GEYJ334V is marked "Not For New Designs," indicating it is obsolete for new product development. Use ERJ-S08J334V for new designs; ERJ-8GEYJ334V is acceptable only for legacy system maintenance.

Q: Can I use RV1206FR-07330KL (±1% tolerance) as a direct replacement?

A: Yes. RV1206FR-07330KL is a direct functional replacement with superior ±1% tolerance specification. All other electrical parameters (resistance, power rating, temperature coefficient, operating temperature) match the ERJ-S08J334V. The tighter tolerance makes it suitable for precision applications where the ±5% tolerance of the primary part may be insufficient.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental compliance profile of the ERJ-S08J334V.

Q: What is the maximum height difference among substitute parts?

A: Maximum height variation is 0.030" (0.75mm) for CR1206-JW-334ELF versus 0.024" (0.60mm) for CRCW1206330KJNEA. All parts remain within 1206 package specification. Height differences are negligible for standard PCB assembly and do not affect circuit performance or board layout compatibility.

Q: Can I mix different substitute parts in the same production run?

A: Yes, provided all parts meet your circuit's electrical requirements (resistance, tolerance, power rating, temperature range). Mixing manufacturers is acceptable from an electrical standpoint. For automotive applications, ensure all parts carry AEC-Q200 qualification. Document part selection in bill of materials for traceability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message