ERJ-S08J331V Equivalent & Substitute Parts

Part Overview

The ERJ-S08J331V is a 330 Ohm ±5% 0.25W (1/4W) thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring corrosion resistance. The part is currently Active in production status with 1,060 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements demand higher power ratings or improved tolerance specifications, or when alternative manufacturers' components meet identical electrical and mechanical parameters.

Key Parameters

Parameter	Value
Resistance	330 Ohms
Tolerance	±5%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C to 155°C
Features	Anti-Sulfur, Automotive AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S08J331V are classified into three categories based on electrical and mechanical compatibility:

Direct Equivalents (Identical Specifications): Parts with matching resistance (330 Ohms), tolerance (±5%), power rating (0.25W), package (1206), composition (thick film), temperature coefficient (±200ppm/°C), and operating temperature range (-55°C to 155°C). These parts are interchangeable without circuit redesign.

Similar Parts with Higher Power Rating: Parts maintaining identical resistance, tolerance, package, and temperature specifications but with increased power dissipation capability (0.5W, 0.667W, or 0.75W). These are suitable for applications requiring additional thermal margin or pulse withstanding capability while maintaining the same footprint and electrical characteristics.

Upgraded Tolerance Parts: Parts with superior tolerance specification (±1% instead of ±5%) while maintaining identical resistance, power rating, package, and operating temperature range. These provide improved accuracy for precision applications.

All substitute parts listed maintain the 1206 package format, thick film composition, and automotive-grade qualification where applicable. Substitution is valid only when the application requirements do not exceed the specified electrical parameters of the selected alternative.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Features	Status
ERJ-S08J331V	Panasonic	330 Ω	±5%	0.25	±200	-55 to 155	Anti-Sulfur, AEC-Q200	Active
ERJ-8GEYJ331V	Panasonic	330 Ω	±5%	0.25	±200	-55 to 155	AEC-Q200	Not For New Designs
ERJ-P08J331V	Panasonic	330 Ω	±5%	0.667	±200	-55 to 155	AEC-Q200, Pulse Withstanding	Active
TRR18EZPF3300	Rohm Semiconductor	330 Ω	±1%	0.25	±100	-55 to 155	Anti-Sulfur	Obsolete
CR1206-JW-331ELF	Bourns Inc.	330 Ω	±5%	0.25	±200	-55 to 155	Moisture Resistant	Active
CRCW1206330RJNEA	Vishay Dale	330 Ω	±5%	0.25	±200	-55 to 155	AEC-Q200	Active
CRCW1206330RJNEAHP	Vishay Dale	330 Ω	±5%	0.75	±200	-55 to 155	AEC-Q200, Pulse Withstanding	Active
ESR18EZPJ331	Rohm Semiconductor	330 Ω	±5%	0.5	±200	-55 to 155	AEC-Q200, Pulse Withstanding	Active
KTR18EZPJ331	Rohm Semiconductor	330 Ω	±5%	0.25	±200	-55 to 155	AEC-Q200, High Voltage	Active
RMCF1206JG330R	Stackpole Electronics	330 Ω	±5%	0.25	±200	-55 to 155	AEC-Q200	Active
RMCF1206JT330R	Stackpole Electronics	330 Ω	±5%	0.25	±200	-55 to 155	AEC-Q200	Active

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications): Select CRCW1206330RJNEA, RMCF1206JG330R, RMCF1206JT330R, CR1206-JW-331ELF, or KTR18EZPJ331. All maintain 330 Ohm resistance, ±5% tolerance, 0.25W power rating, and -55°C to 155°C operating range. RMCF1206JT330R offers the highest inventory availability (480,413 units). All listed alternatives are Active status products with ROHS3 compliance and MSL 1 rating.

For Enhanced Power Dissipation: Select ERJ-P08J331V (0.667W) or CRCW1206330RJNEAHP (0.75W) or ESR18EZPJ331 (0.5W) when circuit design permits higher power rating. These maintain identical resistance, tolerance, and operating temperature while providing thermal margin for pulse withstanding applications. All are Active status with AEC-Q200 qualification.

For Improved Tolerance Specification: Select TRR18EZPF3300 (±1% tolerance, ±100ppm/°C) when precision applications require tighter resistance tolerance. Note this part is Obsolete status; verify long-term availability before design commitment.

Avoid: ERJ-8GEYJ331V is marked "Not For New Designs" and should not be selected for new applications despite electrical equivalence.

Frequently Asked Questions (FAQ)

Q: Can I substitute CRCW1206330RJNEAHP for ERJ-S08J331V in my circuit?

A: CRCW1206330RJNEAHP is electrically compatible (330 Ohm, ±5%, -55°C to 155°C) but has 0.75W power rating versus 0.25W. Substitution is valid if your circuit does not require the specific 0.25W power limitation. The higher power rating does not create incompatibility; it provides additional thermal margin.

Q: What is the difference between ERJ-S08J331V and ERJ-P08J331V?

A: Both are Panasonic 330 Ohm ±5% 1206 resistors with identical electrical characteristics. The primary difference is power rating: ERJ-S08J331V is 0.25W while ERJ-P08J331V is 0.667W. ERJ-P08J331V also includes pulse withstanding capability. ERJ-S08J331V is Active; ERJ-P08J331V is also Active.

Q: Are all listed substitutes automotive-qualified?

A: Most substitutes carry AEC-Q200 automotive qualification (CRCW1206330RJNEA, CRCW1206330RJNEAHP, ESR18EZPJ331, KTR18EZPJ331, RMCF1206JG330R, RMCF1206JT330R). CR1206-JW-331ELF from Bourns does not list AEC-Q200 but is moisture resistant. TRR18EZPF3300 is obsolete and lacks AEC-Q200 designation. Verify automotive qualification requirements for your specific application.

Q: Can I use TRR18EZPF3300 as a substitute?

A: TRR18EZPF3300 is electrically compatible (330 Ohm, ±1%, 0.25W, -55°C to 155°C) and offers superior tolerance. However, this part is Obsolete status. Use only if existing inventory is available and long-term supply is not required. For new designs, select from Active status alternatives.

Q: What does "Pulse Withstanding" mean in the feature list?

A: Pulse withstanding indicates the resistor is rated to handle transient overvoltage or overcurrent pulses beyond steady-state specifications. This feature is present in ERJ-P08J331V, CRCW1206330RJNEAHP, and ESR18EZPJ331. Select these parts if your circuit experiences voltage or current spikes.

Q: Are all substitutes ROHS3 compliant?

A: All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level, matching the primary part specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message