ERJ-S08J240V Equivalent & Substitute Parts

Part Overview

The ERJ-S08J240V is a 24 Ohm ±5% 0.25W (1/4W) thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring corrosion resistance. The product is currently active and available in high volume (933 pcs in stock). Equivalent and substitute parts are identified to provide design flexibility, support supply chain continuity, and accommodate specific application requirements such as higher power ratings or alternative manufacturer sourcing.

Substiute Parts

ERJ-S08J240V

Panasonic Electronic ComponentsIn Stock: 954ERJ-S08J240V Datasheet

Current PartRFQ

ERJ-8GEYJ240V

Panasonic Electronic ComponentsIn Stock: 73624ERJ-8GEYJ240V Datasheet

SimilarRFQ

ERJ-P08J240V

Panasonic Electronic ComponentsIn Stock: 14448ERJ-P08J240V Datasheet

SimilarRFQ

CR1206-JW-240ELF

Bourns Inc.In Stock: 25698CR1206-JW-240ELF Datasheet

SimilarRFQ

CRCW120624R0JNEA

Vishay DaleIn Stock: 28368CRCW120624R0JNEA Datasheet

SimilarRFQ

CRCW120624R0JNEAHP

Vishay DaleIn Stock: 44161CRCW120624R0JNEAHP Datasheet

SimilarRFQ

RMCF1206JT24R0

Stackpole Electronics IncIn Stock: 8497RMCF1206JT24R0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S08J240V are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 24 Ohms
• Tolerance: ±5%
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

• Package / Case: 1206 (3216 Metric)
• Composition: Thick Film
• Number of terminations: 2

Compliance & Environmental (Must Match or Exceed):

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Unaffected status

Allowable Variations:

• Power rating: Equal or higher than 0.25W (0.667W and 0.75W rated parts are acceptable substitutes)
• Automotive qualification: AEC-Q200 rated parts are preferred; non-automotive rated parts may substitute if application does not require automotive certification
• Features: Anti-sulfur coating is specific to ERJ-S08J240V; other features (moisture resistant, pulse withstanding) do not prevent substitution

Substitute parts are grouped by power rating and manufacturer to facilitate selection based on application requirements and supply availability.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalents (0.25W, AEC-Q200 Rated, Active Status):

• CRCW120624R0JNEA (Vishay Dale): Identical electrical and mechanical specifications with AEC-Q200 qualification. Suitable for direct substitution in automotive applications.
• RMCF1206JT24R0 (Stackpole Electronics Inc): Identical electrical and mechanical specifications with AEC-Q200 qualification. Suitable for direct substitution in automotive applications.

Higher Power Rating Alternatives (Active Status):

• ERJ-P08J240V (Panasonic): 0.667W (2/3W) rated with pulse withstanding capability. Suitable when higher power dissipation margin is required. Maintains AEC-Q200 qualification and active product status.
• CRCW120624R0JNEAHP (Vishay Dale): 0.75W (3/4W) rated with pulse withstanding capability and AEC-Q200 qualification. Suitable for applications requiring maximum power margin.

Non-Automotive Alternative:

• CR1206-JW-240ELF (Bourns Inc.): Identical 0.25W specifications without AEC-Q200 qualification. Suitable only for non-automotive applications where automotive certification is not required.

Legacy Alternative (Not Recommended for New Designs):

• ERJ-8GEYJ240V (Panasonic): Electrically and mechanically equivalent but marked "Not For New Designs." Use only for legacy system maintenance or repair.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P08J240V (0.667W) be used as a direct replacement for ERJ-S08J240V (0.25W)? A: Yes. Higher power rating components are functionally compatible substitutes. The 0.667W rating provides additional thermal margin and does not degrade circuit performance. Physical dimensions remain identical (1206 package), and all electrical parameters match.

Q: Is CR1206-JW-240ELF suitable for automotive applications? A: CR1206-JW-240ELF lacks AEC-Q200 automotive qualification. It is suitable only for non-automotive applications. For automotive designs, use CRCW120624R0JNEA, RMCF1206JT24R0, or ERJ-P08J240V.

Q: What is the difference between ERJ-S08J240V and ERJ-8GEYJ240V? A: Both parts are electrically and mechanically identical 24 Ohm ±5% 0.25W 1206 resistors with AEC-Q200 qualification. ERJ-8GEYJ240V is marked "Not For New Designs," indicating it is a legacy product. ERJ-S08J240V is the current active equivalent and should be used for new designs.

Q: Can I use CRCW120624R0JNEAHP (0.75W) instead of the standard 0.25W part? A: Yes. The 0.75W rating is a higher power variant suitable for substitution. Physical package dimensions are nearly identical (3.10mm vs 3.20mm length), and all electrical specifications match. This part provides maximum thermal headroom for demanding applications.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts are RoHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the environmental compliance of the ERJ-S08J240V.

Q: What is the key difference between Panasonic, Vishay Dale, Bourns, and Stackpole alternatives? A: All manufacturers produce functionally equivalent 24 Ohm ±5% 1206 thick film resistors. Selection should be based on: (1) automotive qualification requirement (AEC-Q200), (2) power rating needed, (3) supply availability, and (4) product status (active vs. legacy). Panasonic ERJ-P08J240V and Vishay CRCW120624R0JNEAHP offer higher power ratings; Stackpole RMCF1206JT24R0 and Vishay CRCW120624R0JNEA provide direct 0.25W equivalents.