ERJ-S08J113V Equivalent & Substitute Parts

Part Overview

The ERJ-S08J113V is a 11 kOhms ±5% 0.25W (1/4W) chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The part is currently in active production status with 836 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements demand higher power ratings, or when alternative manufacturers' components offer improved lead times or cost optimization while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	11 kOhms
Tolerance	±5%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution validity for the ERJ-S08J113V is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Resistance value: 11 kOhms
Tolerance: ±5%
Package / Case: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±200ppm/°C
Operating Temperature Range: -55°C ~ 155°C
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

Power Rating: Substitute parts may have equal or higher power ratings (0.25W or greater)
Automotive Rating: Substitute parts may include or exclude AEC-Q200 qualification
Features: Substitute parts may have additional features (anti-sulfur, pulse withstanding, moisture resistant) without affecting substitution validity

The substitute parts listed below meet all mandatory matching parameters. Variations in power rating and additional features are noted in the parameter comparison table.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power Rating	Package	Temp Coeff	Operating Temp	AEC-Q200	Features	Product Status
ERJ-S08J113V	Panasonic	11 kOhms	±5%	0.25W	1206	±200ppm/°C	-55°C ~ 155°C	Yes	Anti-Sulfur	Active
ERJ-8GEYJ113V	Panasonic	11 kOhms	±5%	0.25W	1206	±200ppm/°C	-55°C ~ 155°C	Yes	None	Not For New Designs
ERJ-P08J113V	Panasonic	11 kOhms	±5%	0.667W	1206	±200ppm/°C	-55°C ~ 155°C	Yes	Pulse Withstanding	Active
CR1206-JW-113ELF	Bourns Inc.	11 kOhms	±5%	0.25W	1206	±200ppm/°C	-55°C ~ 155°C	No	Moisture Resistant	Active
CRCW120611K0JNEA	Vishay Dale	11 kOhms	±5%	0.25W	1206	±200ppm/°C	-55°C ~ 155°C	Yes	None	Active
RMCF1206JT11K0	Stackpole Electronics Inc	11 kOhms	±5%	0.25W	1206	±200ppm/°C	-55°C ~ 155°C	Yes	None	Active

Engineering Selection Recommendations

Primary Substitutes (Active Status, AEC-Q200 Qualified):

CRCW120611K0JNEA (Vishay Dale): Electrically and mechanically equivalent with active production status and automotive qualification. Suitable for direct replacement in automotive applications.
RMCF1206JT11K0 (Stackpole Electronics Inc): Electrically and mechanically equivalent with active production status and automotive qualification. Suitable for direct replacement in automotive applications.
ERJ-P08J113V (Panasonic): Higher power rating (0.667W vs 0.25W) with pulse withstanding capability. Recommended when enhanced power dissipation or transient protection is required. Active production status.

Secondary Substitute (Active Status, Non-Automotive):

CR1206-JW-113ELF (Bourns Inc.): Electrically and mechanically equivalent with active production status. Lacks AEC-Q200 qualification; suitable only for non-automotive applications or where automotive certification is not required.

Legacy Substitute (Not For New Designs):

ERJ-8GEYJ113V (Panasonic): Electrically and mechanically equivalent but marked "Not For New Designs." Use only for legacy system maintenance or when existing design documentation specifies this part number.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P08J113V replace ERJ-S08J113V in my design? A: Yes. ERJ-P08J113V is electrically equivalent with identical resistance, tolerance, temperature coefficient, and operating range. The higher power rating (0.667W vs 0.25W) provides additional thermal margin and is backward compatible. Physical dimensions remain identical at 1206 package.

Q: Is CR1206-JW-113ELF suitable for automotive applications? A: CR1206-JW-113ELF is electrically and mechanically equivalent but does not carry AEC-Q200 automotive qualification. Use only in non-automotive applications or where automotive certification is not a design requirement.

Q: What is the difference between ERJ-S08J113V and ERJ-8GEYJ113V? A: Both parts are electrically and mechanically identical. ERJ-8GEYJ113V is marked "Not For New Designs," indicating it is in legacy status. ERJ-S08J113V is the current active equivalent and should be used for new designs.

Q: Can I use any of these substitutes interchangeably on the same PCB? A: All listed substitutes share the identical 1206 (3216 Metric) package footprint and electrical specifications (11 kOhms ±5%, ±200ppm/°C, -55°C ~ 155°C). They are mechanically and electrically interchangeable at the PCB level. Verify compliance requirements (AEC-Q200 for automotive) before selection.

Q: Which substitute offers the best availability? A: ERJ-8GEYJ113V shows the highest inventory (105,397 units), but is marked "Not For New Designs." Among active production parts, CRCW120611K0JNEA (Vishay Dale) and ERJ-P08J113V (Panasonic) offer strong inventory levels with 15,769 and 19,764 units respectively.

Q: Are all these parts RoHS3 compliant? A: Yes. All listed parts carry ROHS3 Compliant status and Moisture Sensitivity Level 1 (Unlimited), meeting environmental and handling requirements for industrial and automotive applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message