ERJ-S08J111V Equivalent & Substitute Parts

Part Overview

The ERJ-S08J111V is a 110 Ohm ±5% 1/4W (0.25W) chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability. The part is currently active in production with 1003 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements shift toward higher power ratings, or when alternative manufacturers' components meet the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Resistance	110 Ohms
Tolerance	±5%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Primary Substitution Criteria (Must Match):

Resistance value: 110 Ohms
Tolerance: ±5%
Package / Case: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±200ppm/°C
Operating Temperature Range: -55°C ~ 155°C
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

Secondary Substitution Criteria (May Vary):

Power Rating: 0.25W or higher
Manufacturer: Different manufacturers acceptable
Features: Anti-sulfur, automotive AEC-Q200, pulse withstanding, or moisture resistant
Product Status: Active or Not For New Designs
Physical dimensions: Minor height variations acceptable within package specification

The substitute parts listed below meet all primary criteria. Variations in power rating, features, and product status are noted for engineering evaluation.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Operating Temp	Features	Product Status	Stock (Pcs)
ERJ-S08J111V	Panasonic	110 Ω	±5%	0.25	1206	±200ppm/°C	-55~155°C	Anti-Sulfur, AEC-Q200	Active	1,003
ERJ-8GEYJ111V	Panasonic	110 Ω	±5%	0.25	1206	±200ppm/°C	-55~155°C	AEC-Q200	Not For New Designs	65,220
ERJ-P08J111V	Panasonic	110 Ω	±5%	0.667	1206	±200ppm/°C	-55~155°C	AEC-Q200, Pulse Withstanding	Active	10,111
CR1206-JW-111ELF	Bourns Inc.	110 Ω	±5%	0.25	1206	±200ppm/°C	-55~155°C	Moisture Resistant	Active	25,893
CRCW1206110RJNEA	Vishay Dale	110 Ω	±5%	0.25	1206	±200ppm/°C	-55~155°C	AEC-Q200	Active	17,264

Engineering Selection Recommendations

For Automotive AEC-Q200 Applications: Select ERJ-S08J111V (primary), CRCW1206110RJNEA (Vishay Dale alternative), or ERJ-P08J111V (higher power rating). All three parts carry AEC-Q200 qualification and are active in production.

For Higher Power Dissipation Requirements: ERJ-P08J111V provides 0.667W (2/3W) rating versus 0.25W of the primary part, maintaining all other electrical parameters. This part is active and suitable for new designs.

For Non-Automotive Applications with Moisture Resistance: CR1206-JW-111ELF (Bourns) offers moisture-resistant thick film construction without automotive qualification, suitable for industrial environments. This part is active in production.

For Legacy Design Compatibility: ERJ-8GEYJ111V is electrically and mechanically identical to ERJ-S08J111V but carries "Not For New Designs" status. Use only for replacement or maintenance of existing designs.

For Cross-Manufacturer Standardization: CRCW1206110RJNEA (Vishay Dale) provides a qualified alternative from a different manufacturer, maintaining AEC-Q200 compliance and active production status.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P08J111V replace ERJ-S08J111V in all applications? A: ERJ-P08J111V is electrically and mechanically compatible. The higher power rating (0.667W vs. 0.25W) does not create incompatibility; it provides additional thermal margin. Verify that the higher power rating does not introduce unintended thermal effects in the circuit.

Q: What is the difference between ERJ-S08J111V and ERJ-8GEYJ111V? A: Both parts are identical in electrical and mechanical specifications. ERJ-8GEYJ111V is marked "Not For New Designs," indicating it is being phased out. Use ERJ-S08J111V for new designs; ERJ-8GEYJ111V is suitable only for replacement of existing assemblies.

Q: Is CR1206-JW-111ELF suitable for automotive applications? A: CR1206-JW-111ELF does not carry AEC-Q200 qualification. It is suitable for industrial and commercial applications requiring moisture resistance but not for automotive applications requiring AEC-Q200 compliance.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the primary part's compliance profile.

Q: What are the physical dimension differences between substitute parts? A: All parts use 1206 (3216 Metric) package. Maximum seated heights vary slightly: ERJ-S08J111V and ERJ-8GEYJ111V at 0.028" (0.70mm), CR1206-JW-111ELF at 0.030" (0.75mm), and CRCW1206110RJNEA at 0.024" (0.60mm). These variations are within standard 1206 package tolerance and do not affect PCB assembly compatibility.

Q: Can I use CRCW1206110RJNEA as a direct replacement for ERJ-S08J111V? A: Yes. CRCW1206110RJNEA meets all primary substitution criteria: 110 Ohm resistance, ±5% tolerance, 0.25W power rating, 1206 package, ±200ppm/°C temperature coefficient, -55°C to 155°C operating range, AEC-Q200 qualification, and ROHS3 compliance. It is manufactured by Vishay Dale and is active in production.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message