Equivalent & Substitute Parts for ERJ-S08F97R6V

Part Overview

The ERJ-S08F97R6V is a 97.6 Ohm ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability. The part is currently in active production status with 1065 pieces available in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements shift between automotive and general-purpose applications, or when alternative manufacturers offer compatible solutions with equivalent electrical and mechanical characteristics.

Substiute Parts

ERJ-S08F97R6V

Panasonic Electronic ComponentsIn Stock: 1117ERJ-S08F97R6V Datasheet

Current PartRFQ

ERJ-8ENF97R6V

Panasonic Electronic ComponentsIn Stock: 45363ERJ-8ENF97R6V Datasheet

SimilarRFQ

RC1206FR-0797R6L

YAGEOIn Stock: 7364RC1206FR-0797R6L Datasheet

SimilarRFQ

RMCF1206FT97R6

Stackpole Electronics IncIn Stock: 8191RMCF1206FT97R6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F97R6V is determined by the following mandatory parameters:

• Resistance value: 97.6 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical requirements. Differences in features (such as anti-sulfur coating or automotive certification) and product status do not prevent functional substitution when the application does not mandate these specific attributes.

Parameter Comparison

Engineering Selection Recommendations

For new designs, select from parts with Active product status: ERJ-S08F97R6V (Panasonic), RC1206FR-0797R6L (YAGEO), or RMCF1206FT97R6 (Stackpole). All three are actively manufactured and ROHS3 compliant.

For automotive applications requiring AEC-Q200 qualification, ERJ-S08F97R6V and RMCF1206FT97R6 are qualified to this standard. ERJ-8ENF97R6V also carries AEC-Q200 qualification but is marked Not For New Designs and should be used only for legacy design support or replacement inventory.

RC1206FR-0797R6L from YAGEO is suitable for general-purpose and industrial applications where automotive qualification is not required. This part offers equivalent electrical performance and full RoHS3 compliance.

All substitute parts are available in Tape & Reel packaging suitable for automated assembly processes.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF97R6V replace ERJ-S08F97R6V in new designs?

A: ERJ-8ENF97R6V meets all electrical and mechanical requirements for functional substitution. However, it is marked Not For New Designs. Use this part only for legacy system support or when ERJ-S08F97R6V becomes unavailable and design freeze is not possible.

Q: What is the difference between the anti-sulfur coating on ERJ-S08F97R6V and standard thick film resistors?

A: Anti-sulfur coating is a feature specific to ERJ-S08F97R6V. Substitute parts without this feature remain functionally equivalent for resistance, tolerance, power rating, and temperature characteristics. Select anti-sulfur variants only if the application environment requires protection against sulfur contamination.

Q: Are all substitute parts suitable for automotive applications?

A: ERJ-S08F97R6V and RMCF1206FT97R6 carry AEC-Q200 automotive qualification. RC1206FR-0797R6L does not list automotive certification and is suitable for general-purpose and industrial applications. Verify application requirements before selecting a substitute.

Q: Do package dimensions vary between substitute parts?

A: All parts use 1206 (3216 Metric) package. Slight dimensional variations exist: ERJ-S08F97R6V and RMCF1206FT97R6 measure 0.126" L × 0.063" W (3.20mm × 1.60mm), while RC1206FR-0797R6L measures 0.122" L × 0.063" W (3.10mm × 1.60mm). These variations are within standard 1206 package tolerances and do not affect PCB footprint compatibility.

Q: What is the inventory status of substitute parts?

A: ERJ-8ENF97R6V has 45268 pieces in stock, RC1206FR-0797R6L has 7265 pieces, and RMCF1206FT97R6 has 8097 pieces available. ERJ-S08F97R6V has 1065 pieces in stock.

Q: Are all parts RoHS3 compliant?

A: Yes. All listed parts are ROHS3 compliant with MSL rating 1 (Unlimited), suitable for unrestricted storage and handling.