ERJ-S08F8872V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F8872V is an 88.7 kOhms ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 1206 (3216 Metric) package format. This component is rated for 0.25W (1/4W) power dissipation and is designed for automotive applications with AEC-Q200 qualification and anti-sulfur protection. The part is currently in active production status with 688 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements shift between automotive and general-purpose applications, or when supply chain optimization is required across multiple manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

ERJ-S08F8872V

Panasonic Electronic ComponentsIn Stock: 794ERJ-S08F8872V Datasheet

Current PartRFQ

ERJ-8ENF8872V

Panasonic Electronic ComponentsIn Stock: 49601ERJ-8ENF8872V Datasheet

SimilarRFQ

CRCW120688K7FKEA

Vishay DaleIn Stock: 10337CRCW120688K7FKEA Datasheet

SimilarRFQ

RC1206FR-0788K7L

YAGEOIn Stock: 8708RC1206FR-0788K7L Datasheet

SimilarRFQ

RMCF1206FT88K7

Stackpole Electronics IncIn Stock: 12466RMCF1206FT88K7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F8872V is determined by strict equivalence across the following parameters:

• Resistance value: 88.7 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Package: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)
• Moisture sensitivity: MSL 1 (exact match required)

All four substitute parts listed meet these core electrical and mechanical criteria. Variations in physical dimensions (length, width, height) and product status (Active vs. Not For New Designs) are secondary considerations that do not affect functional substitution.

Parameter Comparison

Engineering Selection Recommendations

For new designs and active production environments, select from parts with Active product status: CRCW120688K7FKEA (Vishay Dale), RC1206FR-0788K7L (YAGEO), or RMCF1206FT88K7 (Stackpole Electronics Inc).

For automotive applications requiring AEC-Q200 qualification, the following parts are suitable: ERJ-S08F8872V (primary choice, anti-sulfur feature), CRCW120688K7FKEA, or RMCF1206FT88K7. The ERJ-8ENF8872V carries AEC-Q200 rating but is marked Not For New Designs and should be used only for legacy design maintenance or repair applications.

The RC1206FR-0788K7L from YAGEO does not carry AEC-Q200 automotive qualification and is suitable for general-purpose applications only. This part features moisture-resistant construction as an alternative to anti-sulfur protection.

All substitute parts are ROHS3 compliant with MSL 1 rating, indicating unlimited shelf life under standard storage conditions.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF8872V be used as a direct replacement for ERJ-S08F8872V in new designs?

A: ERJ-8ENF8872V meets all electrical and mechanical specifications for functional equivalence. However, it is marked Not For New Designs. For new production, use CRCW120688K7FKEA, RC1206FR-0788K7L, or RMCF1206FT88K7 instead.

Q: Is RC1206FR-0788K7L suitable for automotive applications?

A: RC1206FR-0788K7L does not carry AEC-Q200 automotive qualification. It is suitable for general-purpose applications. For automotive use, select ERJ-S08F8872V, ERJ-8ENF8872V, CRCW120688K7FKEA, or RMCF1206FT88K7.

Q: What is the difference between anti-sulfur and moisture-resistant features?

A: Anti-sulfur protection (ERJ-S08F8872V) is designed for automotive environments where sulfur exposure is a concern. Moisture-resistant construction (RC1206FR-0788K7L) protects against humidity and moisture ingress. These are distinct protective mechanisms for different environmental conditions.

Q: Are all substitute parts available in the same packaging format?

A: All substitute parts use 1206 (3216 Metric) package with 2 terminations. Physical dimensions vary slightly between manufacturers (length 0.122" to 0.126", height 0.024" to 0.028"), but all are compatible with standard 1206 PCB footprints.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. All parts share identical electrical specifications (88.7 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C) and the same 1206 package footprint. Physical dimension variations are within standard PCB design tolerances.

Q: What is the inventory status of each substitute part?

A: ERJ-S08F8872V: 688 units; ERJ-8ENF8872V: 49,516 units; CRCW120688K7FKEA: 10,236 units; RC1206FR-0788K7L: 8,672 units; RMCF1206FT88K7: 12,365 units.