ERJ-S08F8871V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F8871V is an 8.87 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in automotive and industrial environments. The product is currently active and available in high volume (723 pcs in stock).

Substitute parts are necessary when the primary part becomes unavailable, when design requirements shift to alternative manufacturers, or when supply chain optimization is needed while maintaining equivalent electrical and mechanical performance.

Substiute Parts

ERJ-S08F8871V
Panasonic Electronic ComponentsIn Stock: 799ERJ-S08F8871V Datasheet
ERJ-S08F8871V
Current Part
ERJ-8ENF8871V
Panasonic Electronic ComponentsIn Stock: 37111ERJ-8ENF8871V Datasheet
ERJ-8ENF8871V
Similar
CRCW12068K87FKEA
Vishay DaleIn Stock: 19901CRCW12068K87FKEA Datasheet
CRCW12068K87FKEA
Similar
RC1206FR-078K87L
YAGEOIn Stock: 25181RC1206FR-078K87L Datasheet
RC1206FR-078K87L
Similar
RMCF1206FT8K87
Stackpole Electronics IncIn Stock: 4121RMCF1206FT8K87 Datasheet
RMCF1206FT8K87
Similar

Key Parameters

Parameter Value
Resistance 8.87 kOhms
Tolerance ±1%
Power Rating 0.25W (1/4W)
Package / Case 1206 (3216 Metric)
Composition Thick Film
Temperature Coefficient ±100ppm/°C
Operating Temperature Range -55°C ~ 155°C
Number of Terminations 2
RoHS Status ROHS3 Compliant
Moisture Sensitivity Level 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F8871V is determined by strict equivalence across the following critical parameters:

  • Resistance value: 8.87 kOhms (exact match required)
  • Tolerance: ±1% (exact match required)
  • Power rating: 0.25W / 1/4W (exact match required)
  • Package: 1206 (3216 Metric) (exact match required)
  • Composition: Thick Film (exact match required)
  • Temperature coefficient: ±100ppm/°C (exact match required)
  • Operating temperature range: -55°C ~ 155°C (exact match required)
  • Termination count: 2 (exact match required)
  • RoHS compliance: ROHS3 Compliant (exact match required)
  • Moisture sensitivity: MSL 1 (exact match required)

All four substitute parts listed below meet these criteria and are therefore electrically and mechanically interchangeable with the ERJ-S08F8871V.

Parameter Comparison

Part Number Manufacturer Resistance Tolerance Power Package Temp Coeff Op. Temp Range Status Packaging Type
ERJ-S08F8871V Panasonic 8.87 kΩ ±1% 0.25W 1206 ±100ppm/°C -55°C ~ 155°C Active Tape & Reel
ERJ-8ENF8871V Panasonic 8.87 kΩ ±1% 0.25W 1206 ±100ppm/°C -55°C ~ 155°C Not For New Designs Tape & Reel
CRCW12068K87FKEA Vishay Dale 8.87 kΩ ±1% 0.25W 1206 ±100ppm/°C -55°C ~ 155°C Active Cut Tape & Digi-Reel
RC1206FR-078K87L YAGEO 8.87 kΩ ±1% 0.25W 1206 ±100ppm/°C -55°C ~ 155°C Active Tape & Reel
RMCF1206FT8K87 Stackpole Electronics 8.87 kΩ ±1% 0.25W 1206 ±100ppm/°C -55°C ~ 155°C Active Tape & Reel

Engineering Selection Recommendations

For new designs, select from the three active-status alternatives: CRCW12068K87FKEA (Vishay Dale), RC1206FR-078K87L (YAGEO), or RMCF1206FT8K87 (Stackpole Electronics). All three maintain full ROHS3 compliance and MSL 1 rating.

The ERJ-8ENF8871V (Panasonic) carries "Not For New Designs" status and should be reserved for legacy system maintenance or existing production lines only.

For automotive applications requiring AEC-Q200 qualification, ERJ-S08F8871V, ERJ-8ENF8871V, CRCW12068K87FKEA, and RMCF1206FT8K87 all meet this requirement. RC1206FR-078K87L does not carry AEC-Q200 rating but features moisture-resistant construction.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF8871V be used as a direct replacement for ERJ-S08F8871V?

A: Yes, electrically and mechanically. However, ERJ-8ENF8871V carries "Not For New Designs" status. Use only for legacy system support or existing production continuity.

Q: What is the difference between the packaging types listed?

A: Tape & Reel (TR) and Cut Tape & Digi-Reel are both standard SMD packaging formats. Tape & Reel is continuous reel packaging; Cut Tape & Digi-Reel provides individual tape segments. Both are compatible with standard pick-and-place assembly equipment.

Q: Does RC1206FR-078K87L work in automotive applications?

A: RC1206FR-078K87L meets all electrical and mechanical specifications but does not carry AEC-Q200 automotive qualification. It features moisture-resistant construction. Use only in non-automotive applications or where AEC-Q200 is not a design requirement.

Q: Are there dimensional differences between substitute parts?

A: All parts use the 1206 (3216 Metric) package. Minor height variations exist: ERJ-S08F8871V and RMCF1206FT8K87 are 0.028" (0.70mm) maximum; CRCW12068K87FKEA is 0.024" (0.60mm) maximum; RC1206FR-078K87L is 0.026" (0.65mm) maximum. These variations are within standard PCB assembly tolerances.

Q: Which substitute offers the highest inventory availability?

A: ERJ-8ENF8871V has 37,040 pcs in stock. Among active-status parts, RC1206FR-078K87L has 25,100 pcs, CRCW12068K87FKEA has 19,828 pcs, and RMCF1206FT8K87 has 4,088 pcs.

Request Quote (Ships tomorrow)