ERJ-S08F8870V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F8870V is a 887 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring reliability in harsh environments. The product is currently active in production with 1039 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements shift toward alternative certifications or features, or when supply chain optimization requires sourcing from multiple qualified manufacturers.

Key Parameters

Parameter	Value
Resistance	887 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

Resistance value: 887 Ohms
Tolerance: ±1%
Power rating: 0.25W (1/4W)
Package: 1206 (3216 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Termination count: 2
RoHS compliance: ROHS3 Compliant
MSL rating: 1 (Unlimited)

All listed substitute parts meet these core electrical and mechanical parameters. Variations in secondary features (such as anti-sulfur coating versus moisture resistance, or automotive AEC-Q200 qualification) do not disqualify substitution but indicate design-specific considerations.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	AEC-Q200	Features	Product Status	Inventory
ERJ-S08F8870V	Panasonic	887 Ω	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Anti-Sulfur	Active	1039
ERJ-8ENF8870V	Panasonic	887 Ω	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Standard	Not For New Designs	95520
CR1206-FX-8870ELF	Bourns Inc.	887 Ω	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	No	Moisture Resistant	Active	25682
CRCW1206887RFKEA	Vishay Dale	887 Ω	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Standard	Active	9776
RC1206FR-07887RL	YAGEO	887 Ω	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	No	Moisture Resistant	Active	103359
RMCF1206FT887R	Stackpole Electronics Inc	887 Ω	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Standard	Active	1072

Engineering Selection Recommendations

For Automotive Applications (AEC-Q200 Required): CRCW1206887RFKEA (Vishay Dale) and RMCF1206FT887R (Stackpole Electronics Inc) are qualified alternatives. Both maintain active product status and AEC-Q200 certification. CRCW1206887RFKEA offers higher inventory availability (9776 units).

For General Industrial Applications: RC1206FR-07887RL (YAGEO) provides the highest inventory level (103359 units) with active product status and moisture-resistant construction. CR1206-FX-8870ELF (Bourns Inc.) is an alternative with 25682 units in stock.

Legacy Design Compatibility: ERJ-8ENF8870V (Panasonic) maintains electrical and mechanical equivalence but carries "Not For New Designs" status. This part is suitable only for sustaining production of existing designs where qualification has already been completed.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF8870V be used in new designs? A: No. ERJ-8ENF8870V is marked "Not For New Designs" by the manufacturer. New designs should use ERJ-S08F8870V or other active-status alternatives.

Q: What is the difference between anti-sulfur and moisture-resistant features? A: Anti-sulfur coating protects against sulfur-containing atmospheric contaminants common in industrial environments. Moisture-resistant construction addresses humidity and condensation exposure. Both are protective features; selection depends on the specific environmental conditions of the application.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant and carry MSL rating 1 (Unlimited), meeting the same environmental and regulatory requirements as the primary part.

Q: Do all substitutes have AEC-Q200 certification? A: No. Only ERJ-S08F8870V, ERJ-8ENF8870V, CRCW1206887RFKEA, and RMCF1206FT887R carry AEC-Q200 qualification. CR1206-FX-8870ELF and RC1206FR-07887RL do not. AEC-Q200 certification is required for automotive applications.

Q: Are there dimensional differences between substitute parts? A: Minor variations exist in maximum seated height (ranging from 0.024" to 0.030"), and length dimensions vary slightly (0.122" to 0.126"). These differences are within standard 1206 package tolerances and do not affect PCB layout or assembly compatibility.

Q: Which substitute offers the best supply availability? A: RC1206FR-07887RL (YAGEO) has the highest inventory at 103359 units. For automotive-qualified alternatives, CRCW1206887RFKEA (Vishay Dale) offers 9776 units.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message