ERJ-S08F7682V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F7682V is a 76.8 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently in active production status with 817 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design revisions require alternative sourcing, or when supply chain optimization requires qualified alternatives from different manufacturers while maintaining identical electrical and mechanical performance.

Key Parameters

Parameter	Value
Resistance	76.8 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F7682V is determined by strict equivalence across the following parameters:

Resistance value: 76.8 kOhms (exact match required)
Tolerance: ±1% (exact match required)
Power rating: 0.25W / 1/4W (exact match required)
Package: 1206 (3216 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature coefficient: ±100ppm/°C (exact match required)
Operating temperature range: -55°C ~ 155°C (exact match required)
RoHS compliance: ROHS3 Compliant (exact match required)
Moisture sensitivity: MSL 1 (exact match required)

All qualified substitutes listed below meet these criteria. Dimensional variations within supplier tolerances and differences in special features (such as anti-sulfur coating versus moisture-resistant coating) do not affect functional equivalence for standard circuit applications.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Product Status	Inventory
ERJ-S08F7682V	Panasonic Electronic Components	76.8 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	817 Pcs
ERJ-8ENF7682V	Panasonic Electronic Components	76.8 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Not For New Designs	47912 Pcs
CRCW120676K8FKEA	Vishay Dale	76.8 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	21691 Pcs
RC1206FR-0776K8L	YAGEO	76.8 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	11585 Pcs
RMCF1206FT76K8	Stackpole Electronics Inc	76.8 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	910 Pcs

Engineering Selection Recommendations

For new designs and active production, select from parts with Active product status: CRCW120676K8FKEA (Vishay Dale), RC1206FR-0776K8L (YAGEO), or RMCF1206FT76K8 (Stackpole Electronics Inc). All three maintain full ROHS3 compliance and automotive-grade specifications.

The ERJ-8ENF7682V carries a "Not For New Designs" status and should be used only for legacy design maintenance or existing production continuity where the original specification is locked.

For automotive applications requiring AEC-Q200 qualification, CRCW120676K8FKEA, RMCF1206FT76K8, and the primary part ERJ-S08F7682V all carry explicit AEC-Q200 ratings. RC1206FR-0776K8L does not list AEC-Q200 qualification but meets all other electrical and mechanical parameters.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF7682V be used as a direct replacement for ERJ-S08F7682V?

A: Yes, electrically and mechanically. However, ERJ-8ENF7682V is marked "Not For New Designs." Use only for legacy product support or existing production lines where design specifications are fixed.

Q: What is the difference between anti-sulfur and moisture-resistant coatings?

A: Both are protective surface treatments. Anti-sulfur coating (ERJ-S08F7682V) protects against sulfur-containing atmospheric contaminants common in industrial environments. Moisture-resistant coating (RC1206FR-0776K8L) protects against humidity and moisture ingress. Both achieve MSL 1 rating. Selection depends on the specific environmental exposure of the application.

Q: Are all substitute parts suitable for automotive applications?

A: CRCW120676K8FKEA, RMCF1206FT76K8, and ERJ-S08F7682V carry explicit AEC-Q200 automotive qualification. RC1206FR-0776K8L does not list AEC-Q200 certification. For automotive designs requiring AEC-Q200 compliance, use only the three qualified parts.

Q: Do dimensional variations between manufacturers affect PCB layout?

A: All parts use the 1206 (3216 Metric) package. Dimensional variations (length 0.122" to 0.126", height 0.024" to 0.028") fall within standard 1206 package tolerances and do not require PCB layout changes. Standard 1206 footprints accommodate all listed parts.

Q: Which substitute offers the best inventory availability?

A: CRCW120676K8FKEA (Vishay Dale) has the highest inventory at 21691 units. ERJ-8ENF7682V (Panasonic) has 47912 units but is not recommended for new designs.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. All listed parts meet identical electrical specifications (76.8 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C) and package requirements (1206). No circuit redesign or re-qualification is necessary for substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message