Equivalent & Substitute Parts for ERJ-S08F7502V

Part Overview

The ERJ-S08F7502V is a 75 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in automotive and industrial environments. The product is currently active and available in stock.

Substitute parts become necessary when the primary part reaches end-of-life status, inventory constraints occur, or design requirements shift to alternative qualified suppliers while maintaining electrical and mechanical compatibility.

Substiute Parts

ERJ-S08F7502V

Panasonic Electronic ComponentsIn Stock: 905ERJ-S08F7502V Datasheet

Current PartRFQ

ERJ-8ENF7502V

Panasonic Electronic ComponentsIn Stock: 2192ERJ-8ENF7502V Datasheet

SimilarRFQ

RMCS1206FT75K0

Stackpole Electronics IncIn Stock: 763RMCS1206FT75K0 Datasheet

UpgradeRFQ

CR1206-FX-7502ELF

Bourns Inc.In Stock: 73587CR1206-FX-7502ELF Datasheet

SimilarRFQ

CRCW120675K0FKEA

Vishay DaleIn Stock: 25406CRCW120675K0FKEA Datasheet

SimilarRFQ

CRCW120675K0FKEAHP

Vishay DaleIn Stock: 10897CRCW120675K0FKEAHP Datasheet

SimilarRFQ

CRCW120675K0FKTA

Vishay DaleIn Stock: 10926CRCW120675K0FKTA Datasheet

SimilarRFQ

RC1206FR-0775KL

YAGEOIn Stock: 61871RC1206FR-0775KL Datasheet

SimilarRFQ

RC3216F753CS

Samsung Electro-MechanicsIn Stock: 1055RC3216F753CS Datasheet

SimilarRFQ

RMCF1206FT75K0

Stackpole Electronics IncIn Stock: 15704RMCF1206FT75K0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

• Resistance value: 75 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C
• Termination count: 2
• Moisture sensitivity level: 1 (Unlimited)

All listed substitute parts meet these core electrical and mechanical requirements. Variations in physical dimensions (length, width, height) within the 1206 package specification, manufacturing features (anti-sulfur, moisture resistant, pulse withstanding), and compliance certifications (AEC-Q200, RoHS status) are noted but do not disqualify substitution when the primary parameters align.

Parameter Comparison

Engineering Selection Recommendations

For direct replacement of ERJ-S08F7502V in active designs, select from parts with Active product status and ROHS3 Compliant certification:

RMCS1206FT75K0 (Stackpole Electronics Inc) and RMCF1206FT75K0 (Stackpole Electronics Inc) are qualified alternatives with AEC-Q200 automotive certification matching the original part's qualification level.

CRCW120675K0FKEA (Vishay Dale) and RC1206FR-0775KL (YAGEO) provide Active status with ROHS3 compliance and are suitable for applications where automotive AEC-Q200 qualification is not mandatory.

CR1206-FX-7502ELF (Bourns Inc.) and RC3216F753CS (Samsung Electro-Mechanics) offer Active status with moisture-resistant features and ROHS3 compliance.

CRCW120675K0FKTA (Vishay Dale) is electrically equivalent but carries RoHS non-compliant status and REACH Affected designation, limiting use to applications without RoHS requirements.

ERJ-8ENF7502V (Panasonic Electronic Components) is electrically and mechanically equivalent but marked Not For New Designs, suitable only for legacy system maintenance.

CRCW120675K0FKEAHP (Vishay Dale) features 0.75W power rating instead of 0.25W, providing higher power dissipation capability in the same 1206 package for applications requiring increased thermal margin.

Frequently Asked Questions (FAQ)

Q: Can CRCW120675K0FKEAHP (0.75W) replace ERJ-S08F7502V (0.25W)?

A: Yes. The higher power rating is a superset of the original specification. The part meets all core electrical parameters (75 kOhms ±1%, ±100ppm/°C, -55°C to 155°C) and maintains 1206 package compatibility. The increased power rating provides additional design margin without affecting circuit function.

Q: Is CRCW120675K0FKTA suitable for new automotive designs?

A: No. This part is RoHS non-compliant and REACH Affected, disqualifying it from automotive applications subject to RoHS3 requirements. Use CRCW120675K0FKEA or CRCW120675K0FKEAHP for automotive compliance.

Q: What is the difference between anti-sulfur and moisture-resistant features?

A: Anti-sulfur coating protects against sulfur-containing atmospheric corrosion. Moisture-resistant construction reduces water absorption. Both are protective features; selection depends on environmental exposure conditions. The core electrical parameters remain identical.

Q: Can ERJ-8ENF7502V be used in new product designs?

A: No. This part carries Not For New Designs status. It is suitable only for replacement in existing systems. Use Active-status alternatives for new designs.

Q: Are all listed substitutes pin-compatible with ERJ-S08F7502V?

A: Yes. All parts maintain 1206 (3216 Metric) package specification with 2 terminations. Physical dimension variations within package tolerance do not affect PCB footprint compatibility.

Q: Which substitute offers the best automotive qualification?

A: RMCS1206FT75K0, RMCF1206FT75K0, CRCW120675K0FKEA, and CRCW120675K0FKEAHP all carry AEC-Q200 automotive certification matching the original part's qualification level.