ERJ-S08F7501V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F7501V is a 7.5 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and industrial applications requiring high reliability. The product is currently active and available in high volume inventory (751 pcs). Substitute parts are necessary when the primary part becomes unavailable, when design requirements mandate specific manufacturer certifications, or when application-specific features such as pulse withstanding capability are required.

Key Parameters

Parameter	Value
Resistance	7.5 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F7501V is determined by strict equivalence across the following parameters: resistance value (7.5 kOhms), tolerance (±1%), power rating (0.25W), package type (1206), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and RoHS compliance (ROHS3). All substitute parts listed meet these core electrical and mechanical requirements and are therefore functionally interchangeable at the component level.

Substitute parts are grouped into two categories based on product status and feature set:

Category 1: Active Status with AEC-Q200 Automotive Qualification — Parts suitable for automotive and mission-critical applications requiring active product support and automotive-grade reliability certifications.

Category 2: Active Status with Moisture Resistant Features — Parts suitable for general industrial applications with enhanced moisture resistance but without automotive qualification.

Category 3: Not For New Designs — Legacy parts with full electrical equivalence but restricted for new design implementations.

Category 4: Higher Power Rating Variant — Parts with identical electrical characteristics but increased power dissipation capability (0.75W), suitable for applications requiring thermal margin.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	AEC-Q200	Product Status	Inventory (pcs)
ERJ-S08F7501V	Panasonic	7.5 kΩ	±1%	0.25	1206	±100ppm/°C	-55~155°C	Yes	Active	751
ERJ-8ENF7501V	Panasonic	7.5 kΩ	±1%	0.25	1206	±100ppm/°C	-55~155°C	Yes	Not For New Designs	89150
CRG1206F7K5	TE Connectivity	7.5 kΩ	±1%	0.25	1206	±100ppm/°C	-55~155°C	No	Active	788
AC1206FR-077K5L	YAGEO	7.5 kΩ	±1%	0.25	1206	±100ppm/°C	-55~155°C	Yes	Active	12177
CR1206-FX-7501ELF	Bourns Inc.	7.5 kΩ	±1%	0.25	1206	±100ppm/°C	-55~155°C	No	Active	18178
CRCW12067K50FKEA	Vishay Dale	7.5 kΩ	±1%	0.25	1206	±100ppm/°C	-55~155°C	Yes	Active	26067
CRCW12067K50FKEAHP	Vishay Dale	7.5 kΩ	±1%	0.75	1206	±100ppm/°C	-55~155°C	Yes	Active	50866
RC1206FR-077K5L	YAGEO	7.5 kΩ	±1%	0.25	1206	±100ppm/°C	-55~155°C	No	Active	43167
RC3216F752CS	Samsung Electro-Mechanics	7.5 kΩ	±1%	0.25	1206	±100ppm/°C	-55~155°C	No	Active	832
RMCF1206FT7K50	Stackpole Electronics	7.5 kΩ	±1%	0.25	1206	±100ppm/°C	-55~155°C	Yes	Active	174312

Engineering Selection Recommendations

For Automotive and Mission-Critical Applications: Select from parts with active product status and AEC-Q200 qualification: AC1206FR-077K5L (YAGEO), CRCW12067K50FKEA (Vishay Dale), RMCF1206FT7K50 (Stackpole Electronics), or the primary part ERJ-S08F7501V (Panasonic). These parts meet automotive reliability standards and are supported for new designs.

For General Industrial Applications: CRG1206F7K5 (TE Connectivity), CR1206-FX-7501ELF (Bourns Inc.), RC1206FR-077K5L (YAGEO), and RC3216F752CS (Samsung Electro-Mechanics) are active products suitable for non-automotive industrial use. These parts provide full electrical equivalence with moisture-resistant features.

For Applications Requiring Increased Thermal Margin: CRCW12067K50FKEAHP (Vishay Dale) offers 0.75W power rating while maintaining all other electrical parameters identical to the primary part. This variant is suitable for designs where thermal stress or pulse withstanding capability is a consideration.

For Legacy System Support: ERJ-8ENF7501V (Panasonic) is electrically and mechanically equivalent with high inventory availability but is designated "Not For New Designs." This part is appropriate only for sustaining production of existing products.

Frequently Asked Questions (FAQ)

Q: Can all listed substitute parts be used interchangeably with ERJ-S08F7501V?

A: All substitute parts meet the core electrical and mechanical requirements (7.5 kOhms ±1%, 0.25W, 1206 package, ±100ppm/°C, -55°C ~ 155°C). However, application-specific requirements such as automotive qualification (AEC-Q200) or product lifecycle status must be considered. Parts designated "Not For New Designs" should not be used in new product development.

Q: What is the difference between parts with and without AEC-Q200 qualification?

A: AEC-Q200 qualification indicates the part meets automotive industry reliability and quality standards established by the Automotive Electronics Council. Parts with this certification are suitable for automotive applications and mission-critical systems. Parts without AEC-Q200 are suitable for general industrial applications but lack automotive-grade qualification.

Q: Can CRCW12067K50FKEAHP (0.75W) be used as a direct replacement for ERJ-S08F7501V (0.25W)?

A: Yes, CRCW12067K50FKEAHP is electrically and mechanically equivalent and can be used as a direct replacement. The higher power rating (0.75W vs 0.25W) provides additional thermal margin and does not create compatibility issues. The part occupies the same 1206 package footprint and maintains identical resistance, tolerance, and temperature characteristics.

Q: Are there packaging differences between substitute parts?

A: All substitute parts use the 1206 (3216 Metric) package with 2 terminations. Physical dimensions vary slightly (length ranges from 0.122" to 0.126", height from 0.024" to 0.030"), but these variations are within standard 1206 package tolerances and do not affect PCB footprint compatibility or soldering processes.

Q: Which substitute part has the highest inventory availability?

A: RMCF1206FT7K50 (Stackpole Electronics) has the highest inventory at 174,312 pcs. This part is active, AEC-Q200 qualified, and suitable for automotive applications, making it a reliable high-volume alternative to the primary part.

Q: What does "Not For New Designs" mean for ERJ-8ENF7501V?

A: This designation indicates the part is in legacy status and Panasonic does not recommend its use in new product designs. The part remains available for sustaining production of existing products but should not be selected for new development. For new designs, select from parts with "Active" product status.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message