ERJ-S08F7150V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F7150V is a 715 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The product is currently active and available in high volume (874 pcs in stock).

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility allows for alternative qualified sources meeting identical electrical and mechanical specifications.

Key Parameters

Parameter	Value
Resistance	715 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F7150V is determined by strict equivalence across the following critical parameters:

Resistance value: 715 Ohms
Tolerance: ±1%
Power rating: 0.25W (1/4W)
Package: 1206 (3216 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Termination count: 2
RoHS3 compliance
MSL rating: 1 (Unlimited)

All substitute parts listed meet these electrical and mechanical requirements. Variations in physical dimensions (length, width, height) within standard tolerances and differences in packaging format (Tape & Reel vs. Cut Tape) do not affect functional substitutability. Automotive AEC-Q200 qualification and anti-sulfur features are present in most alternatives but are not mandatory substitution criteria.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Product Status	Packaging Format	AEC-Q200
ERJ-S08F7150V	Panasonic	715 Ω	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel	Yes
ERJ-8ENF7150V	Panasonic	715 Ω	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Not For New Designs	Tape & Reel	Yes
CRCW1206715RFKEA	Vishay Dale	715 Ω	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	Cut Tape & Digi-Reel	Yes
RC1206FR-07715RL	YAGEO	715 Ω	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	Cut Tape & Digi-Reel	No
RMCF1206FT715R	Stackpole Electronics	715 Ω	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel	Yes

Engineering Selection Recommendations

For new designs and active production, CRCW1206715RFKEA (Vishay Dale), RC1206FR-07715RL (YAGEO), and RMCF1206FT715R (Stackpole Electronics) are preferred substitutes. All three maintain Active product status and full RoHS3 compliance.

CRCW1206715RFKEA and RMCF1206FT715R both carry AEC-Q200 automotive qualification, matching the primary part's automotive-grade specification. CRCW1206715RFKEA is available in higher volume (16,562 pcs) and offers Cut Tape & Digi-Reel packaging flexibility. RMCF1206FT715R provides Tape & Reel packaging consistent with the ERJ-S08F7150V format.

RC1206FR-07715RL (YAGEO) is functionally equivalent with the highest inventory availability (136,201 pcs) and Active status. This part lacks explicit AEC-Q200 certification but includes moisture-resistant thick film construction suitable for general industrial applications.

ERJ-8ENF7150V (Panasonic) is electrically and mechanically identical to the primary part but carries "Not For New Designs" status, limiting its use to legacy system maintenance or existing design continuity only.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF7150V be used as a direct replacement for ERJ-S08F7150V?

A: Electrically and mechanically, yes. Both parts are 715 Ohm ±1% 0.25W 1206 thick film resistors with identical temperature coefficients and operating ranges. However, ERJ-8ENF7150V carries "Not For New Designs" status. Use this part only for legacy system repairs or when design continuity with existing assemblies is required.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Both packaging formats contain identical components. Tape & Reel is continuous reel format suitable for high-volume automated assembly. Cut Tape & Digi-Reel provides smaller quantity flexibility with individual tape segments or reel options. Selection depends on production volume and assembly equipment compatibility, not component performance.

Q: Are all substitute parts automotive-qualified?

A: CRCW1206715RFKEA, RMCF1206FT715R, and the primary part ERJ-S08F7150V carry AEC-Q200 automotive qualification. RC1206FR-07715RL does not list explicit AEC-Q200 certification but meets all electrical and mechanical specifications. For automotive applications requiring formal AEC-Q200 compliance, use CRCW1206715RFKEA or RMCF1206FT715R.

Q: Do physical dimension variations affect substitutability?

A: No. All parts meet 1206 (3216 Metric) package specifications. Minor variations in length (0.122" to 0.126"), width (0.063"), and height (0.024" to 0.028") are within standard package tolerances and do not affect electrical performance or PCB footprint compatibility.

Q: Which substitute offers the best supply availability?

A: RC1206FR-07715RL (YAGEO) has the highest inventory at 136,201 pcs. CRCW1206715RFKEA (Vishay Dale) offers 16,562 pcs with AEC-Q200 qualification. RMCF1206FT715R (Stackpole) provides 21,790 pcs. Selection should balance availability with application-specific requirements such as automotive certification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message