Panasonic ERJ-S08F6813V 681kΩ 1% 1/4W 1206 Chip Resistor Equivalent & Substitute Parts

Part Overview

The Panasonic ERJ-S08F6813V is a 681 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package with anti-sulfur coating and automotive AEC-Q200 qualification. This component is currently in active production status with 811 pieces available in stock. Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating), mechanical compatibility (package size and form factor), and environmental ratings (temperature range, RoHS compliance, AEC-Q200 automotive qualification).

Substiute Parts

ERJ-S08F6813V

Panasonic Electronic ComponentsIn Stock: 861ERJ-S08F6813V Datasheet

Current PartRFQ

ERJ-8ENF6813V

Panasonic Electronic ComponentsIn Stock: 42637ERJ-8ENF6813V Datasheet

SimilarRFQ

CRCW1206681KFKEA

Vishay DaleIn Stock: 32601CRCW1206681KFKEA Datasheet

SimilarRFQ

RC1206FR-07681KL

YAGEOIn Stock: 202270RC1206FR-07681KL Datasheet

SimilarRFQ

RMCF1206FT681K

Stackpole Electronics IncIn Stock: 11893RMCF1206FT681K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S08F6813V are qualified based on the following criteria:

Electrical Parameters: Resistance value of 681 kOhms, tolerance of ±1%, and power rating of 0.25W (1/4W) must be identical across all substitutes.

Mechanical Parameters: All substitutes must use the 1206 (3216 Metric) package with two terminations to ensure PCB footprint compatibility and soldering process compatibility.

Environmental & Compliance Parameters: All substitutes must maintain the operating temperature range of -55°C to 155°C, ROHS3 compliance, and MSL rating of 1 (Unlimited). Automotive AEC-Q200 qualification is present in the primary part and most substitutes, indicating suitability for automotive applications.

Composition: Thick film construction is consistent across all parts, ensuring similar frequency response and noise characteristics.

Parameter Comparison

Engineering Selection Recommendations

For Active Production Designs: CRCW1206681KFKEA (Vishay Dale) and RMCF1206FT681K (Stackpole Electronics) are preferred substitutes. Both parts maintain active product status, AEC-Q200 automotive qualification, ROHS3 compliance, and identical electrical specifications. CRCW1206681KFKEA offers the highest inventory availability (32,533 pieces) with a slightly reduced seated height of 0.024" compared to the primary part's 0.028".

For Automotive Applications: RMCF1206FT681K provides equivalent automotive qualification with AEC-Q200 rating and active product status, making it suitable for automotive circuit designs requiring long-term supply assurance.

For Non-Automotive Applications: RC1206FR-07681KL (YAGEO) is a viable substitute with active product status and the highest inventory level (202,199 pieces). This part omits AEC-Q200 qualification but includes moisture-resistant thick film construction. It is suitable for industrial and consumer applications where automotive qualification is not required.

Obsolescence Consideration: ERJ-8ENF6813V (Panasonic) carries a "Not For New Designs" status and should be avoided for new product development despite matching electrical and mechanical specifications.

Frequently Asked Questions (FAQ)

Q: Can I substitute ERJ-S08F6813V with any of these parts on my PCB without layout changes?

A: Yes. All substitute parts use the 1206 (3216 Metric) package with identical footprint dimensions (0.126" L × 0.063" W or 3.20mm × 1.60mm). Seated heights vary slightly (0.024" to 0.028"), but this variation is within standard PCB assembly tolerances and does not require layout modification.

Q: Which substitute is best for automotive applications?

A: Both CRCW1206681KFKEA and RMCF1206FT681K maintain AEC-Q200 automotive qualification and active product status. CRCW1206681KFKEA offers superior inventory availability, while RMCF1206FT681K provides equivalent automotive-grade performance from Stackpole Electronics.

Q: Why is ERJ-8ENF6813V marked "Not For New Designs"?

A: This designation indicates that Panasonic has transitioned this part to end-of-life status. While electrically and mechanically equivalent, it should not be selected for new product designs due to potential future supply discontinuation.

Q: Does RC1206FR-07681KL work in automotive circuits?

A: RC1206FR-07681KL lacks AEC-Q200 automotive qualification. It is suitable for industrial and consumer applications but should not be used in automotive designs requiring AEC-Q200 compliance.

Q: Are there differences in temperature coefficient between these parts?

A: No. All parts, including the primary ERJ-S08F6813V, specify a temperature coefficient of ±100ppm/°C, ensuring equivalent frequency stability and thermal performance across the -55°C to 155°C operating range.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape & Digi-Reel packaging (RC1206FR-07681KL) is supplied in shorter tape segments. Both formats are compatible with standard SMD assembly processes; selection depends on production volume and equipment capability.