Equivalent & Substitute Parts for ERJ-S08F6341V

Part Overview

The ERJ-S08F6341V is a 6.34 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This is an active product featuring anti-sulfur coating and automotive AEC-Q200 qualification. Substitute parts are necessary when the primary part becomes unavailable or when design requirements call for alternative qualified sources from different manufacturers while maintaining identical electrical and mechanical specifications.

Substiute Parts

ERJ-S08F6341V

Panasonic Electronic ComponentsIn Stock: 1002ERJ-S08F6341V Datasheet

Current PartRFQ

ERJ-8ENF6341V

Panasonic Electronic ComponentsIn Stock: 56711ERJ-8ENF6341V Datasheet

SimilarRFQ

CRCW12066K34FKEA

Vishay DaleIn Stock: 21160CRCW12066K34FKEA Datasheet

SimilarRFQ

RC1206FR-076K34L

YAGEOIn Stock: 22786RC1206FR-076K34L Datasheet

SimilarRFQ

RMCF1206FT6K34

Stackpole Electronics IncIn Stock: 7214RMCF1206FT6K34 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

• Resistance value: 6.34 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

All listed substitute parts meet these core electrical and mechanical requirements. Differences in physical dimensions (length, width, height) and specific feature sets (anti-sulfur vs. moisture resistant vs. automotive AEC-Q200) do not affect functional substitutability within the specified parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

For new designs, select from active product status parts: CRCW12066K34FKEA (Vishay Dale), RC1206FR-076K34L (YAGEO), or RMCF1206FT6K34 (Stackpole Electronics Inc). All three maintain full RoHS3 compliance and MSL 1 rating.

The ERJ-8ENF6341V carries "Not For New Designs" status and should be used only for legacy design maintenance or existing production continuity where the original specification is locked.

All substitute parts are qualified to the same electrical performance envelope and package footprint, ensuring direct PCB compatibility without layout modification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-S08F6341V be replaced with ERJ-8ENF6341V? A: Electrically and mechanically, yes. However, ERJ-8ENF6341V is marked "Not For New Designs." Use only for legacy product support or existing production runs where the original part number is specified.

Q: Are CRCW12066K34FKEA, RC1206FR-076K34L, and RMCF1206FT6K34 interchangeable with ERJ-S08F6341V? A: Yes. All three parts meet identical electrical specifications (6.34 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C) and share the 1206 package footprint. Physical dimensions vary slightly but do not affect PCB placement or circuit function.

Q: What is the difference between anti-sulfur and moisture-resistant features? A: Anti-sulfur coating (ERJ-S08F6341V) protects against sulfur-containing atmospheric corrosion. Moisture-resistant composition (RC1206FR-076K34L) addresses humidity exposure. Both are environmental protection mechanisms; selection depends on application environment, not electrical performance.

Q: Do all substitute parts carry AEC-Q200 automotive qualification? A: ERJ-S08F6341V, ERJ-8ENF6341V, CRCW12066K34FKEA, and RMCF1206FT6K34 are AEC-Q200 qualified. RC1206FR-076K34L does not carry AEC-Q200 rating. For automotive applications requiring AEC-Q200 compliance, use only the four qualified parts.

Q: Can these parts be used interchangeably in existing PCB designs? A: Yes, provided the original design does not specify AEC-Q200 as a mandatory requirement. All parts fit the 1206 footprint without layout changes. Verify that your design does not lock to a specific manufacturer part number for traceability or supply chain reasons.