ERJ-S08F6202V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F6202V is a 62 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The product is currently active and available in high volume (1038 pcs in stock).

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative packaging formats are required, or when design flexibility allows for functionally identical components from different manufacturers that meet the same electrical and mechanical specifications.

Substiute Parts

ERJ-S08F6202V

Panasonic Electronic ComponentsIn Stock: 1145ERJ-S08F6202V Datasheet

Current PartRFQ

ERJ-8ENF6202V

Panasonic Electronic ComponentsIn Stock: 42650ERJ-8ENF6202V Datasheet

SimilarRFQ

CRCW120662K0FKEA

Vishay DaleIn Stock: 9827CRCW120662K0FKEA Datasheet

SimilarRFQ

RC1206FR-0762KL

YAGEOIn Stock: 262638RC1206FR-0762KL Datasheet

SimilarRFQ

RMCF1206FT62K0

Stackpole Electronics IncIn Stock: 26578RMCF1206FT62K0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F6202V is determined by strict equivalence across the following parameters:

• Resistance value: 62 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Package / Case: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

All four substitute parts listed below meet these criteria. Differences in packaging format (Tape & Reel vs. Cut Tape), product status, and minor dimensional variations do not affect functional equivalence for circuit design purposes.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are functionally equivalent to the ERJ-S08F6202V based on electrical and mechanical parameters. Selection should be based on the following criteria:

Primary Selection (Active Status): CRCW120662K0FKEA (Vishay Dale), RC1206FR-0762KL (YAGEO), and RMCF1206FT62K0 (Stackpole Electronics) are all active products with full production support and recommended for new designs.

Secondary Selection (Legacy Status): ERJ-8ENF6202V (Panasonic) carries a "Not For New Designs" status and should be used only when existing inventory must be consumed or when design continuity with legacy systems is required.

Packaging Considerations: The ERJ-8ENF6202V is available in Cut Tape and Digi-Reel® format, offering flexibility for lower-volume or manual assembly operations. All other parts are supplied in standard Tape & Reel format suitable for automated pick-and-place assembly.

Automotive Compliance: ERJ-S08F6202V, ERJ-8ENF6202V, CRCW120662K0FKEA, and RMCF1206FT62K0 carry AEC-Q200 automotive qualification. RC1206FR-0762KL does not specify AEC-Q200 rating but meets all electrical and environmental specifications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF6202V be used as a direct replacement for ERJ-S08F6202V?

A: Yes, ERJ-8ENF6202V is electrically and mechanically equivalent. However, it carries a "Not For New Designs" status. Use only when existing inventory is available or design continuity with legacy systems is required. For new designs, select from the active product alternatives.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging is optimized for automated assembly with continuous feeding through pick-and-place machines. Cut Tape and Digi-Reel® formats provide smaller quantities and are suitable for manual assembly, prototyping, or lower-volume production runs. All formats contain the same component.

Q: Are all substitute parts suitable for automotive applications?

A: ERJ-S08F6202V, ERJ-8ENF6202V, CRCW120662K0FKEA, and RMCF1206FT62K0 carry AEC-Q200 automotive qualification. RC1206FR-0762KL does not specify AEC-Q200 rating. For automotive applications requiring AEC-Q200 compliance, select from the four qualified alternatives.

Q: What does the ±100ppm/°C temperature coefficient mean?

A: The temperature coefficient specifies the maximum change in resistance value per degree Celsius across the operating temperature range. All listed parts maintain ±100ppm/°C, ensuring consistent performance across -55°C to 155°C.

Q: Can I substitute based on physical dimensions alone?

A: No. While all parts share the 1206 (3216 Metric) package designation, minor height variations exist (0.024" to 0.028"). Substitution must be based on complete electrical equivalence: resistance value, tolerance, power rating, temperature coefficient, and operating range. Physical compatibility should be verified for space-constrained designs.

Q: What does ROHS3 Compliant mean?

A: ROHS3 (Restriction of Hazardous Substances Directive 3) compliance indicates the component meets European environmental regulations restricting lead, cadmium, mercury, and other hazardous substances. All listed parts are ROHS3 compliant.

Q: Is MSL 1 (Unlimited) important for my application?

A: Moisture Sensitivity Level 1 (Unlimited) indicates the component has no moisture sensitivity restrictions and requires no special handling or storage conditions. All listed parts carry this rating, making them suitable for standard manufacturing and storage environments.