ERJ-S08F6043V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F6043V is a 604 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for demanding automotive and industrial applications. The product is currently active and available in high volume inventory.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements mandate alternative suppliers for supply chain resilience, or when specific feature sets (such as moisture resistance or alternative automotive certifications) are required for particular applications.

Substiute Parts

ERJ-S08F6043V

Panasonic Electronic ComponentsIn Stock: 1011ERJ-S08F6043V Datasheet

Current PartRFQ

ERJ-8ENF6043V

Panasonic Electronic ComponentsIn Stock: 138017ERJ-8ENF6043V Datasheet

SimilarRFQ

CR1206-FX-6043ELF

Bourns Inc.In Stock: 25815CR1206-FX-6043ELF Datasheet

SimilarRFQ

CRCW1206604KFKEA

Vishay DaleIn Stock: 14899CRCW1206604KFKEA Datasheet

SimilarRFQ

RC1206FR-07604KL

YAGEOIn Stock: 44447RC1206FR-07604KL Datasheet

SimilarRFQ

RMCF1206FT604K

Stackpole Electronics IncIn Stock: 4488RMCF1206FT604K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F6043V is determined by strict equivalence across the following parameters:

• Resistance value: 604 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Package: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)
• Moisture sensitivity: MSL 1 (exact match required)

All substitute parts listed below meet these criteria. Variations in secondary features such as anti-sulfur coating, moisture resistance, or automotive certification status do not disqualify substitution but may influence selection based on application-specific requirements.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are electrically and mechanically equivalent to the ERJ-S08F6043V and are suitable for direct replacement in circuit designs.

For new designs, prioritize parts with Active product status: CR1206-FX-6043ELF (Bourns), CRCW1206604KFKEA (Vishay Dale), RC1206FR-07604KL (YAGEO), and RMCF1206FT604K (Stackpole Electronics). The ERJ-8ENF6043V, while available in high volume, carries a "Not For New Designs" designation and should be reserved for legacy system maintenance or replacement applications only.

For automotive applications requiring AEC-Q200 certification, select from CRCW1206604KFKEA, RMCF1206FT604K, or ERJ-8ENF6043V. For applications prioritizing moisture resistance without automotive certification requirements, CR1206-FX-6043ELF and RC1206FR-07604KL are suitable alternatives.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF6043V be used in new designs? A: No. ERJ-8ENF6043V carries a "Not For New Designs" status. This part is suitable only for replacement or legacy system maintenance. For new designs, use active-status alternatives such as CRCW1206604KFKEA, CR1206-FX-6043ELF, RC1206FR-07604KL, or RMCF1206FT604K.

Q: What is the difference between anti-sulfur and moisture-resistant variants? A: Anti-sulfur coating (ERJ-S08F6043V) protects against sulfur contamination in harsh environments. Moisture-resistant variants (CR1206-FX-6043ELF, RC1206FR-07604KL) provide protection against moisture ingress. Both are valid substitutes; selection depends on environmental exposure conditions.

Q: Are all substitute parts AEC-Q200 qualified? A: No. Only CRCW1206604KFKEA, RMCF1206FT604K, and ERJ-8ENF6043V carry AEC-Q200 automotive qualification. CR1206-FX-6043ELF and RC1206FR-07604KL do not have this certification. For automotive applications requiring AEC-Q200 compliance, use only qualified parts.

Q: Do physical dimensions vary between substitute parts? A: Slight variations exist in height-seated measurements (ranging from 0.024" to 0.030"), but all parts conform to the 1206 (3216 Metric) package standard. These dimensional tolerances are within normal PCB assembly specifications and do not affect interchangeability.

Q: What is the significance of MSL 1 rating? A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture bake-out requirements. All listed parts carry this rating, ensuring no special storage or handling procedures are necessary.