ERJ-S08F6042V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F6042V is a 60.4 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in harsh environments. The part is currently in active production status with 1120 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements shift toward alternative feature sets (such as higher power ratings or different environmental specifications), or when supply chain optimization requires sourcing from multiple qualified manufacturers.

Substiute Parts

ERJ-S08F6042V

Panasonic Electronic ComponentsIn Stock: 1197ERJ-S08F6042V Datasheet

Current PartRFQ

ERJ-8ENF6042V

Panasonic Electronic ComponentsIn Stock: 24066ERJ-8ENF6042V Datasheet

SimilarRFQ

CRCW120660K4FKEA

Vishay DaleIn Stock: 21573CRCW120660K4FKEA Datasheet

SimilarRFQ

CRCW120660K4FKEAHP

Vishay DaleIn Stock: 93104CRCW120660K4FKEAHP Datasheet

SimilarRFQ

RC1206FR-0760K4L

YAGEOIn Stock: 36451RC1206FR-0760K4L Datasheet

SimilarRFQ

RMCF1206FT60K4

Stackpole Electronics IncIn Stock: 86183RMCF1206FT60K4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F6042V is determined by the following critical parameters:

Primary Matching Criteria:

• Resistance value: 60.4 kOhms
• Tolerance: ±1%
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C to 155°C
• RoHS Compliance: ROHS3
• Moisture Sensitivity: MSL 1

Secondary Considerations:

• Power rating (0.25W baseline; higher ratings acceptable for same footprint)
• Automotive qualification (AEC-Q200 preferred for equivalent applications)
• Product status (Active preferred; Not For New Designs acceptable for legacy support)
• Specific feature sets (anti-sulfur, pulse withstanding, moisture resistant)

All identified substitutes meet the primary matching criteria. Variations in power rating, specific feature implementations, and product status are noted in the comparison table below.

Parameter Comparison

Engineering Selection Recommendations

For Direct Equivalent Replacement (Active Status, Identical Specifications):

• CRCW120660K4FKEA (Vishay Dale) provides identical electrical and mechanical specifications with active product status and high inventory availability.
• RMCF1206FT60K4 (Stackpole Electronics Inc) offers equivalent performance with AEC-Q200 qualification and the highest inventory level among active substitutes.

For Enhanced Power Handling (Same Footprint, Higher Power Rating):

• CRCW120660K4FKEAHP (Vishay Dale) provides 0.75W rating with pulse withstanding capability while maintaining the 1206 package and identical resistance/tolerance specifications. This option is suitable when circuit requirements demand higher transient energy absorption.

For Legacy System Support (Not For New Designs Status):

• ERJ-8ENF6042V (Panasonic Electronic Components) maintains compatibility with existing designs but carries "Not For New Designs" status. This part is appropriate only for sustaining production of established products.

For Non-Automotive Applications (Alternative Feature Set):

• RC1206FR-0760K4L (YAGEO) provides moisture-resistant construction without automotive qualification, suitable for commercial-grade applications where AEC-Q200 is not required.

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and the specified operating temperature range of -55°C to 155°C.

Frequently Asked Questions (FAQ)

Q: Can CRCW120660K4FKEAHP (0.75W) be used as a direct replacement for ERJ-S08F6042V (0.25W)?

A: Yes. The higher power rating is a superset capability. The 0.75W part will function identically in circuits designed for 0.25W operation. The 1206 package dimensions remain unchanged. Selection of the higher-power variant is appropriate when circuit analysis indicates potential for transient overstress or when design margins require additional thermal headroom.

Q: What is the difference between ERJ-S08F6042V and ERJ-8ENF6042V?

A: Both are Panasonic thick film resistors with identical electrical specifications (60.4 kOhms, ±1%, 0.25W, 1206 package). The primary difference is product status: ERJ-S08F6042V is Active, while ERJ-8ENF6042V is Not For New Designs. The ERJ-8EN series represents an earlier generation. For new designs, ERJ-S08F6042V is the specified choice.

Q: Are all substitute parts AEC-Q200 qualified?

A: Four of the five substitutes carry AEC-Q200 qualification (ERJ-8ENF6042V, CRCW120660K4FKEA, CRCW120660K4FKEAHP, RMCF1206FT60K4). RC1206FR-0760K4L does not include automotive qualification but provides moisture-resistant construction. Selection depends on application requirements.

Q: Do all parts share identical physical dimensions?

A: All parts use the 1206 (3216 Metric) package. Minor variations exist in maximum seated height: ERJ-S08F6042V and RMCF1206FT60K4 measure 0.028" (0.70mm), while CRCW120660K4FKEA, CRCW120660K4FKEAHP, and RC1206FR-0760K4L measure 0.026" (0.65mm) or 0.024" (0.60mm). These variations are within standard PCB assembly tolerances and do not affect interchangeability.

Q: What is the significance of the anti-sulfur feature on ERJ-S08F6042V?

A: Anti-sulfur coating protects the resistor element from corrosion in environments with hydrogen sulfide exposure. This feature is specific to the ERJ-S08F6042V and is not replicated in the listed substitutes. If anti-sulfur protection is a design requirement, ERJ-S08F6042V must be retained as the specified part.

Q: Can RC1206FR-0760K4L be used in automotive applications?

A: RC1206FR-0760K4L lacks AEC-Q200 qualification and is not specified for automotive use. It is suitable for commercial-grade applications. For automotive applications, select from the AEC-Q200 qualified alternatives.