ERJ-S08F6041V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F6041V is a 6.04 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in harsh environments. The product is currently active and available in high volume (796 pcs in stock).

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility across multiple manufacturers is needed while maintaining identical electrical and mechanical performance.

Key Parameters

Parameter	Value
Resistance	6.04 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution validity for the ERJ-S08F6041V is determined by strict equivalence across the following critical parameters:

Resistance value: 6.04 kOhms
Tolerance: ±1%
Power rating: 0.25W (1/4W)
Package: 1206 (3216 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Termination count: 2
RoHS3 compliance
MSL rating: 1 (Unlimited)

All substitute parts listed below meet these electrical and mechanical specifications. Parts are grouped by manufacturer and product status. The ERJ-8ENF6041V from Panasonic is electrically equivalent but carries "Not For New Designs" status. The CRCW12066K04FKEAHP variant differs in power rating (0.75W vs 0.25W) and is listed for reference only; it is not a direct substitute for 0.25W applications.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Composition	Temp Coeff	Op Temp Range	Product Status	Packaging Type	Inventory (pcs)
ERJ-S08F6041V	Panasonic	6.04 kΩ	±1%	0.25	1206	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel	796
ERJ-8ENF6041V	Panasonic	6.04 kΩ	±1%	0.25	1206	Thick Film	±100ppm/°C	-55°C ~ 155°C	Not For New Designs	Tape & Reel	42516
CR1206-FX-6041ELF	Bourns Inc.	6.04 kΩ	±1%	0.25	1206	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel	24967
CRCW12066K04FKEA	Vishay Dale	6.04 kΩ	±1%	0.25	1206	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel	36086
RC1206FR-076K04L	YAGEO	6.04 kΩ	±1%	0.25	1206	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel	169901
RMCF1206FG6K04	Stackpole Electronics	6.04 kΩ	±1%	0.25	1206	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Cut Tape	4453
RMCF1206FT6K04	Stackpole Electronics	6.04 kΩ	±1%	0.25	1206	Thick Film	±100ppm/°C	-55°C ~ 155°C	Active	Tape & Reel	13385

Engineering Selection Recommendations

For new designs, select from parts with Active product status: CR1206-FX-6041ELF (Bourns), CRCW12066K04FKEA (Vishay Dale), RC1206FR-076K04L (YAGEO), RMCF1206FG6K04 (Stackpole Cut Tape), or RMCF1206FT6K04 (Stackpole Tape & Reel).

The ERJ-S08F6041V remains the primary choice for automotive applications requiring AEC-Q200 qualification with anti-sulfur coating. CRCW12066K04FKEA and RMCF1206FG6K04 and RMCF1206FT6K04 also carry AEC-Q200 certification and are suitable for automotive environments.

For non-automotive applications, CR1206-FX-6041ELF and RC1206FR-076K04L provide moisture-resistant thick film construction and are fully compliant with ROHS3 and REACH requirements.

The ERJ-8ENF6041V is electrically equivalent but marked "Not For New Designs" and should be used only for legacy system maintenance or repair applications where the original part specification must be maintained.

Packaging format selection depends on assembly process requirements: Tape & Reel format is standard for automated pick-and-place assembly; Cut Tape format (RMCF1206FG6K04) is suitable for manual or semi-automated processes.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF6041V be used as a substitute for ERJ-S08F6041V in new designs?

A: No. While electrically and mechanically identical, ERJ-8ENF6041V carries "Not For New Designs" status. Use only for legacy system maintenance. For new designs, select from Active status parts: CR1206-FX-6041ELF, CRCW12066K04FKEA, RC1206FR-076K04L, RMCF1206FG6K04, or RMCF1206FT6K04.

Q: What is the difference between RMCF1206FG6K04 and RMCF1206FT6K04?

A: Both parts are electrically identical with matching resistance, tolerance, power rating, and temperature specifications. The difference is packaging format: RMCF1206FG6K04 is supplied in Cut Tape (CT) format, while RMCF1206FT6K04 is supplied in Tape & Reel (TR) format. Select based on your assembly process requirements.

Q: Are all substitute parts suitable for automotive applications?

A: Not all. Only parts with AEC-Q200 certification are qualified for automotive use: ERJ-S08F6041V, ERJ-8ENF6041V, CRCW12066K04FKEA, RMCF1206FG6K04, and RMCF1206FT6K04. CR1206-FX-6041ELF and RC1206FR-076K04L are moisture-resistant but lack automotive qualification.

Q: Can CRCW12066K04FKEAHP replace ERJ-S08F6041V?

A: No. CRCW12066K04FKEAHP has a 0.75W power rating versus the 0.25W rating of ERJ-S08F6041V. This is a different product category and is not a direct substitute. Use only if your application specifically requires higher power dissipation capability.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: MSL 1 indicates the lowest moisture sensitivity level. These parts can be stored indefinitely without special moisture control measures and do not require baking before reflow soldering, simplifying handling and storage requirements.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic components.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message