ERJ-S08F5620V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F5620V is a 562 Ohm ±1% 0.25W (1/4W) thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. With an active product status and 918 units in stock, this component remains in current production. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and automotive qualification requirements.

Key Parameters

Parameter	Value
Resistance	562 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S08F5620V are qualified based on the following criteria:

Electrical Parameters (Must Match):

Resistance value: 562 Ohms
Tolerance: ±1%
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match):

Package / Case: 1206 (3216 Metric)
Number of terminations: 2
Composition: Thick Film

Compliance & Ratings (Must Match or Exceed):

RoHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)
AEC-Q200 automotive qualification (where specified)

Power Rating Consideration:

Primary substitutes maintain 0.25W (1/4W) rating
CRCW1206562RFKEAHP variant offers 0.75W (3/4W) rating for higher power applications

Packaging Format:

Tape & Reel (TR) is standard for all primary substitutes
RMCF1206FT562R available in Cut Tape (CT) & Digi-Reel® format

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	AEC-Q200	Product Status	Inventory (Pcs)
ERJ-S08F5620V	Panasonic Electronic Components	562 Ohms	±1%	0.25W	1206	Yes	Active	918
ERJ-8ENF5620V	Panasonic Electronic Components	562 Ohms	±1%	0.25W	1206	Yes	Not For New Designs	38614
AC1206FR-07562RL	YAGEO	562 Ohms	±1%	0.25W	1206	Yes	Active	10784
CR1206-FX-5620ELF	Bourns Inc.	562 Ohms	±1%	0.25W	1206	No	Active	25357
CRCW1206562RFKEA	Vishay Dale	562 Ohms	±1%	0.25W	1206	Yes	Active	24577
CRCW1206562RFKEAHP	Vishay Dale	562 Ohms	±1%	0.75W	1206	Yes	Active	10171
RC1206FR-07562RL	YAGEO	562 Ohms	±1%	0.25W	1206	No	Active	56822
RMCF1206FT562R	Stackpole Electronics Inc	562 Ohms	±1%	0.25W	1206	Yes	Active	35707

Engineering Selection Recommendations

For New Designs (Active Product Status): Select from AC1206FR-07562RL (YAGEO), CRCW1206562RFKEA (Vishay Dale), RC1206FR-07562RL (YAGEO), or RMCF1206FT562R (Stackpole Electronics Inc). All maintain active production status and full RoHS3 compliance.

For Automotive Applications (AEC-Q200 Required): Prioritize ERJ-S08F5620V (primary), CRCW1206562RFKEA, RMCF1206FT562R, or AC1206FR-07562RL. These parts carry explicit AEC-Q200 automotive qualification.

For Higher Power Dissipation: CRCW1206562RFKEAHP provides 0.75W (3/4W) rating while maintaining 1206 package dimensions and AEC-Q200 qualification. Verify thermal design requirements before substitution.

For Existing Designs (Legacy Support): ERJ-8ENF5620V remains available with high inventory (38614 units) but carries "Not For New Designs" status. Use only for production continuity of existing products.

For Non-Automotive Applications: CR1206-FX-5620ELF (Bourns) and RC1206FR-07562RL (YAGEO) are suitable alternatives without AEC-Q200 requirement, offering active production status and moisture-resistant construction.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF5620V replace ERJ-S08F5620V in new designs? A: No. ERJ-8ENF5620V carries "Not For New Designs" status. Use only for production continuity of existing products. For new designs, select from active-status alternatives.

Q: What is the difference between ERJ-S08F5620V and ERJ-8ENF5620V? A: Both are 562 Ohm ±1% 0.25W 1206 resistors with identical electrical specifications and AEC-Q200 qualification. The primary difference is product lifecycle status: ERJ-S08F5620V is active, while ERJ-8ENF5620V is not recommended for new designs.

Q: Can CRCW1206562RFKEAHP (0.75W) be used instead of ERJ-S08F5620V (0.25W)? A: Yes, from an electrical and mechanical compatibility standpoint. The 0.75W rating provides higher power dissipation capability. Verify that circuit design does not require the lower power rating specification.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts meet RoHS3 compliance requirements.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging? A: Tape & Reel (TR) is standard reel packaging for automated assembly. Cut Tape (CT) & Digi-Reel® is a smaller quantity format. RMCF1206FT562R is available in Cut Tape format; all others use standard Tape & Reel.

Q: Do all substitute parts have AEC-Q200 automotive qualification? A: No. CR1206-FX-5620ELF (Bourns) and RC1206FR-07562RL (YAGEO) do not carry AEC-Q200 rating. For automotive applications, select from parts explicitly marked with AEC-Q200 qualification.

Q: What is Moisture Sensitivity Level (MSL) 1? A: MSL 1 indicates unlimited shelf life without moisture baking requirements. All listed parts meet this specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message