ERJ-S08F5601V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F5601V is a 5.6 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in harsh environments. The product is currently active and available in high volume (1079 pcs in stock). Equivalent and substitute parts are necessary when the primary part is unavailable, when alternative packaging formats are required, or when design flexibility across qualified suppliers is needed.

Key Parameters

Parameter	Value
Resistance	5.6 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F5601V is determined by strict equivalence across the following parameters: resistance value (5.6 kOhms), tolerance (±1%), power rating (0.25W), package type (1206), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (RoHS3, REACH Unaffected). All substitute parts listed meet these core electrical and mechanical requirements. Packaging format variations (Tape & Reel vs. Cut Tape) do not affect electrical equivalence but may impact procurement and assembly workflows. Product status differences are noted where applicable.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	AEC-Q200	Product Status	Packaging Format
ERJ-S08F5601V	Panasonic Electronic Components	5.6 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	Tape & Reel (TR)
ERJ-8ENF5601V	Panasonic Electronic Components	5.6 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Not For New Designs	Cut Tape (CT) & Digi-Reel®
CRG1206F5K6	TE Connectivity Passive Product	5.6 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	No	Active	Tape & Reel (TR)
AC1206FR-075K6L	YAGEO	5.6 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	Tape & Reel (TR)
CR1206-FX-5601ELF	Bourns Inc.	5.6 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	No	Active	Tape & Reel (TR)
CRCW12065K60FKEA	Vishay Dale	5.6 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	Cut Tape (CT) & Digi-Reel®
CRCW12065K60FKEAHP	Vishay Dale	5.6 kOhms	±1%	0.75	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	Cut Tape (CT) & Digi-Reel®
RC1206FR-075K6L	YAGEO	5.6 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	No	Active	Tape & Reel (TR)
RMCF1206FT5K60	Stackpole Electronics Inc	5.6 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	Tape & Reel (TR)

Engineering Selection Recommendations

For applications requiring automotive qualification, select from parts with AEC-Q200 certification: AC1206FR-075K6L (YAGEO), CRCW12065K60FKEA (Vishay Dale), CRCW12065K60FKEAHP (Vishay Dale), or RMCF1206FT5K60 (Stackpole Electronics Inc). The ERJ-S08F5601V primary part and ERJ-8ENF5601V from Panasonic also carry AEC-Q200 qualification.

For new designs, avoid ERJ-8ENF5601V, which is marked "Not For New Designs." All other listed parts are active products suitable for new applications.

The CRCW12065K60FKEAHP variant differs in power rating (0.75W vs. 0.25W) and is suitable only when higher power dissipation capability is required; it is not a direct electrical equivalent for 0.25W applications.

For non-automotive applications without AEC-Q200 requirement, CRG1206F5K6 (TE Connectivity), CR1206-FX-5601ELF (Bourns), and RC1206FR-075K6L (YAGEO) are valid alternatives. All substitute parts maintain RoHS3 compliance and MSL 1 rating.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF5601V replace ERJ-S08F5601V in new designs?

A: No. ERJ-8ENF5601V is marked "Not For New Designs." While electrically equivalent, it should not be used in new product development. Use active alternatives such as AC1206FR-075K6L, CRCW12065K60FKEA, or RMCF1206FT5K60 instead.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Both formats contain identical components. Tape & Reel (TR) is supplied on continuous tape suitable for high-speed automated assembly. Cut Tape (CT) & Digi-Reel® is pre-cut tape on reels, typically used for lower-volume or mixed-component assembly. Electrical performance is identical.

Q: Is CRCW12065K60FKEAHP a direct substitute for ERJ-S08F5601V?

A: No. CRCW12065K60FKEAHP has a 0.75W power rating versus the 0.25W rating of ERJ-S08F5601V. Use it only when higher power dissipation is required. For equivalent 0.25W applications, use CRCW12065K60FKEA instead.

Q: Which substitute parts have automotive AEC-Q200 certification?

A: AC1206FR-075K6L (YAGEO), CRCW12065K60FKEA (Vishay Dale), CRCW12065K60FKEAHP (Vishay Dale), and RMCF1206FT5K60 (Stackpole Electronics Inc) all carry AEC-Q200 qualification, matching the primary part's automotive-grade status.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the primary part's environmental compliance profile.

Q: Can I use CRG1206F5K6 in automotive applications?

A: CRG1206F5K6 does not carry AEC-Q200 certification. For automotive applications, use AEC-Q200 qualified alternatives: AC1206FR-075K6L, CRCW12065K60FKEA, CRCW12065K60FKEAHP, or RMCF1206FT5K60.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message