ERJ-S08F5363V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F5363V is a 536 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and harsh environment applications. The product is currently active and available in high volume (1074 pcs in stock).

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements shift between automotive and general-purpose applications, or when supply chain optimization is needed across multiple qualified manufacturers.

Substiute Parts

ERJ-S08F5363V

Panasonic Electronic ComponentsIn Stock: 1155ERJ-S08F5363V Datasheet

Current PartRFQ

ERJ-8ENF5363V

Panasonic Electronic ComponentsIn Stock: 7910ERJ-8ENF5363V Datasheet

SimilarRFQ

CRCW1206536KFKEA

Vishay DaleIn Stock: 15550CRCW1206536KFKEA Datasheet

SimilarRFQ

RC1206FR-07536KL

YAGEOIn Stock: 10472RC1206FR-07536KL Datasheet

SimilarRFQ

RMCF1206FT536K

Stackpole Electronics IncIn Stock: 1470RMCF1206FT536K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict matching of the following parameters:

• Resistance value: 536 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Package: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)
• Moisture sensitivity: MSL 1 (exact match required)

All four substitute parts meet these criteria. Differences in product status, specific certifications (AEC-Q200 vs. general-purpose), and physical dimensions (height and length tolerances) do not disqualify substitution but may affect application suitability.

Parameter Comparison

Engineering Selection Recommendations

For new designs, select from parts with Active product status: CRCW1206536KFKEA (Vishay Dale), RC1206FR-07536KL (YAGEO), or RMCF1206FT536K (Stackpole Electronics). All three are ROHS3 compliant and available in high volume.

For automotive applications requiring AEC-Q200 qualification, CRCW1206536KFKEA, RMCF1206FT536K, and the primary part ERJ-S08F5363V are qualified. RC1206FR-07536KL is not AEC-Q200 rated and is suitable only for general-purpose applications.

ERJ-8ENF5363V carries "Not For New Designs" status and should be used only for legacy system maintenance or replacement scenarios where the original part is no longer available.

Frequently Asked Questions (FAQ)

Q: Can CRCW1206536KFKEA replace ERJ-S08F5363V in automotive applications?

A: Yes. Both parts meet identical electrical specifications (536 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C to 155°C), are packaged in 1206 (3216 Metric), and hold AEC-Q200 automotive qualification. Physical dimensions differ slightly (CRCW height 0.024" vs. ERJ-S08 height 0.028"), but both conform to 1206 package standards.

Q: Why is ERJ-8ENF5363V marked "Not For New Designs"?

A: ERJ-8ENF5363V is a legacy series from Panasonic. While electrically and mechanically equivalent, it is retained only for existing design support. New designs should use active-status alternatives.

Q: Is RC1206FR-07536KL suitable for automotive applications?

A: RC1206FR-07536KL is not AEC-Q200 rated. It is suitable for general-purpose applications only. For automotive use, select CRCW1206536KFKEA, RMCF1206FT536K, or the primary part ERJ-S08F5363V.

Q: What is the difference between anti-sulfur and moisture-resistant coatings?

A: Anti-sulfur coating (ERJ-S08F5363V) protects against sulfur-containing atmospheric contaminants common in automotive environments. Moisture-resistant coating (RC1206FR-07536KL) protects against humidity. Both are valid for different environmental conditions. Selection depends on application environment.

Q: Can I mix manufacturers in the same circuit board?

A: Yes. All substitute parts meet identical electrical and mechanical specifications and are ROHS3 compliant. Mixed-manufacturer designs are acceptable from an engineering standpoint, though procurement and quality control processes may have specific requirements.