Equivalent & Substitute Parts for ERJ-S08F3600V

Part Overview

The ERJ-S08F3600V is a 360 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring reliable performance across -55°C to 155°C operating temperature range. The product is currently active and available in high volume inventory.

Equivalent and substitute parts are identified based on matching electrical specifications, mechanical package compatibility, and compliance certifications. Alternative sources provide equivalent performance for applications where supply continuity or cost optimization is required.

Substiute Parts

ERJ-S08F3600V

Panasonic Electronic ComponentsIn Stock: 726ERJ-S08F3600V Datasheet

Current PartRFQ

ERJ-8ENF3600V

Panasonic Electronic ComponentsIn Stock: 106036ERJ-8ENF3600V Datasheet

SimilarRFQ

CRG1206F360R

TE Connectivity Passive ProductIn Stock: 925CRG1206F360R Datasheet

DirectRFQ

AC1206FR-07360RL

YAGEOIn Stock: 5717AC1206FR-07360RL Datasheet

SimilarRFQ

CR1206-FX-3600ELF

Bourns Inc.In Stock: 54647CR1206-FX-3600ELF Datasheet

SimilarRFQ

CRCW1206360RFKEA

Vishay DaleIn Stock: 24322CRCW1206360RFKEA Datasheet

SimilarRFQ

CRCW1206360RFKEAHP

Vishay DaleIn Stock: 69500CRCW1206360RFKEAHP Datasheet

SimilarRFQ

RC1206FR-07360RL

YAGEOIn Stock: 192178RC1206FR-07360RL Datasheet

SimilarRFQ

RMCF1206FT360R

Stackpole Electronics IncIn Stock: 18481RMCF1206FT360R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are qualified based on the following criteria:

Electrical Parameters: Resistance value (360 Ohms), tolerance (±1%), power rating (0.25W), and temperature coefficient (±100ppm/°C) must match exactly.

Mechanical Parameters: Package type (1206 / 3216 Metric) and number of terminations (2) must be identical to ensure PCB footprint compatibility and assembly process compatibility.

Environmental & Compliance: Operating temperature range (-55°C to 155°C), RoHS3 compliance, and MSL rating (1) must be maintained.

Composition: Thick film construction is required for thermal and electrical performance consistency.

Parts are grouped into two categories:

1. Direct Equivalents – Identical specifications including automotive AEC-Q200 qualification and anti-sulfur or moisture-resistant features
2. Functional Equivalents – Matching core electrical and mechanical parameters with active product status

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Product Status):

For new designs and ongoing production, select from parts with Active product status: CRG1206F360R (TE Connectivity), AC1206FR-07360RL (YAGEO), CR1206-FX-3600ELF (Bourns Inc.), CRCW1206360RFKEA (Vishay Dale), RC1206FR-07360RL (YAGEO), or RMCF1206FT360R (Stackpole Electronics). All maintain identical electrical specifications and 1206 package compatibility.

Automotive Applications:

For applications requiring AEC-Q200 qualification, select AC1206FR-07360RL, CRCW1206360RFKEA, or RMCF1206FT360R. These parts carry automotive certification equivalent to the primary ERJ-S08F3600V specification.

Enhanced Power Handling:

CRCW1206360RFKEAHP provides 0.75W power rating in the same 1206 package with pulse withstanding capability. This part is suitable for applications requiring higher transient energy absorption while maintaining the same resistance and tolerance.

Legacy Compatibility:

ERJ-8ENF3600V (Panasonic) is marked "Not For New Designs" and should be used only for replacement or repair of existing assemblies where supply continuity is required.

Frequently Asked Questions (FAQ)

Q: Can CRCW1206360RFKEAHP be used as a direct replacement for ERJ-S08F3600V?

A: CRCW1206360RFKEAHP is mechanically and electrically compatible in the 1206 package with matching 360Ω resistance and ±1% tolerance. However, it provides 0.75W power rating versus the 0.25W of ERJ-S08F3600V. This higher rating does not create compatibility issues and may provide additional margin in applications subject to transient stress.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance status, matching the primary part specification.

Q: What is the difference between moisture-resistant and anti-sulfur features?

A: Anti-sulfur coating (ERJ-S08F3600V) protects against sulfur-containing atmospheric contaminants. Moisture-resistant features (CR1206-FX-3600ELF, AC1206FR-07360RL, RC1206FR-07360RL) provide protection against humidity and moisture ingress. Both are protective mechanisms; selection depends on environmental exposure conditions.

Q: Can parts with different packaging formats (Tape & Reel vs. Cut Tape) be used interchangeably?

A: Yes, for PCB assembly purposes. RC1206FR-07360RL is supplied in Cut Tape (CT) & Digi-Reel® format while others use Tape & Reel (TR). The component itself is identical; packaging format affects supply chain and handling only.

Q: Is ERJ-8ENF3600V still available for new designs?

A: No. ERJ-8ENF3600V is marked "Not For New Designs." Use active alternatives such as CRG1206F360R, AC1206FR-07360RL, CR1206-FX-3600ELF, CRCW1206360RFKEA, RC1206FR-07360RL, or RMCF1206FT360R for new product development.

Q: Do all parts meet the -55°C to 155°C operating temperature range?

A: Yes. All listed parts maintain the full -55°C to 155°C operating temperature range with ±100ppm/°C temperature coefficient, ensuring thermal performance consistency across applications.