Equivalent & Substitute Parts for ERJ-S08F3570V

Part Overview

The ERJ-S08F3570V is a 357 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The product is currently active and available in high volume inventory.

Substitute parts are necessary when the primary part becomes unavailable, when design requirements shift to alternative manufacturers, or when supply chain optimization requires qualified alternatives that meet identical electrical and mechanical specifications.

Key Parameters

Parameter	Value
Resistance	357 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F3570V is determined by strict equivalence across the following parameters:

Resistance value: 357 Ohms (exact match required)
Tolerance: ±1% (exact match required)
Power rating: 0.25W (exact match required)
Package type: 1206 (3216 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature coefficient: ±100ppm/°C (exact match required)
Operating temperature range: -55°C to 155°C (exact match required)
RoHS compliance: ROHS3 Compliant (exact match required)
Moisture sensitivity: MSL 1 (exact match required)

All qualified substitutes listed below meet these criteria. Differences in product status, manufacturer features (such as anti-sulfur coating or moisture resistance), and physical dimensions within tolerance do not affect functional interchangeability in circuit applications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Product Status	RoHS	MSL
ERJ-S08F3570V	Panasonic Electronic Components	357 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Active	ROHS3	1
ERJ-8ENF3570V	Panasonic Electronic Components	357 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Not For New Designs	ROHS3	1
CRCW1206357RFKEA	Vishay Dale	357 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Active	ROHS3	1
RC1206FR-07357RL	YAGEO	357 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Active	ROHS3	1
RMCF1206FT357R	Stackpole Electronics Inc	357 Ω	±1%	0.25	1206	±100ppm/°C	-55 to 155°C	Active	ROHS3	1

Engineering Selection Recommendations

For new designs, select from parts with Active product status: CRCW1206357RFKEA (Vishay Dale), RC1206FR-07357RL (YAGEO), or RMCF1206FT357R (Stackpole Electronics Inc). All three are currently in production and carry ROHS3 compliance with unlimited moisture sensitivity rating.

The ERJ-S08F3570V remains the primary choice where Panasonic qualification is specified. The ERJ-8ENF3570V, while electrically equivalent, carries a "Not For New Designs" status and should be used only for legacy system maintenance or where existing design documentation explicitly requires the ERJ-8EN series.

For automotive applications requiring AEC-Q200 certification, ERJ-S08F3570V, ERJ-8ENF3570V, CRCW1206357RFKEA, and RMCF1206FT357R all meet this requirement. RC1206FR-07357RL does not carry AEC-Q200 rating but is qualified for general industrial use.

Frequently Asked Questions (FAQ)

Q: Can I substitute ERJ-S08F3570V with ERJ-8ENF3570V in a new design?

A: No. ERJ-8ENF3570V carries a "Not For New Designs" status. Use only for legacy system support or replacement of existing assemblies. For new designs, select from active alternatives.

Q: Are all substitute parts pin-compatible with ERJ-S08F3570V?

A: Yes. All listed substitutes use the 1206 (3216 Metric) package with 2 terminations. Physical dimensions vary slightly within manufacturing tolerance (length 3.10mm to 3.20mm, height 0.60mm to 0.70mm), but all are compatible with standard 1206 PCB footprints.

Q: Which substitute offers the best availability?

A: RC1206FR-07357RL (YAGEO) has the highest inventory at 47,184 pieces. CRCW1206357RFKEA (Vishay Dale) has 26,910 pieces. Both are suitable for high-volume production.

Q: Does RC1206FR-07357RL meet automotive AEC-Q200 requirements?

A: No. RC1206FR-07357RL is qualified for moisture-resistant general industrial applications but does not carry AEC-Q200 certification. For automotive applications, use ERJ-S08F3570V, CRCW1206357RFKEA, or RMCF1206FT357R.

Q: What is the difference between anti-sulfur and moisture-resistant coatings?

A: Both are protective features. Anti-sulfur coating (ERJ-S08F3570V) protects against sulfur-containing atmospheric corrosion common in industrial environments. Moisture-resistant coating (RC1206FR-07357RL) protects against humidity and condensation. Both meet MSL 1 requirements.

Q: Can I mix different manufacturers in the same assembly?

A: Yes. All substitutes meet identical electrical specifications, tolerance, power rating, and temperature range. Mixed sourcing is acceptable from a functional standpoint, though design documentation should reflect the approved part list.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message