ERJ-S08F2702V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F2702V is a 27 kOhm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in automotive and industrial environments. The product is currently active and available in high volume inventory.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements change, or when alternative sourcing improves supply chain resilience. All substitute parts listed maintain electrical and mechanical compatibility within the specified parameters.

Key Parameters

Parameter	Value
Resistance	27 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Resistance value: 27 kOhms
Tolerance: ±1%
Package: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature Range: -55°C ~ 155°C
RoHS3 Compliance

All listed substitute parts meet these core electrical and mechanical requirements. Parts are grouped by manufacturer and product status. The ERJ-8ENF2702V carries a "Not For New Designs" status and represents a legacy equivalent. The CRCW120627K0FKEAHP variant differs in power rating (0.75W vs. 0.25W) and is listed for reference only; it is not a direct substitute for applications requiring 0.25W rating.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp (°C)	AEC-Q200	Product Status
ERJ-S08F2702V	Panasonic	27 kΩ	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	Yes	Active
ERJ-8ENF2702V	Panasonic	27 kΩ	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	Yes	Not For New Designs
CRG1206F27K	TE Connectivity	27 kΩ	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	No	Active
AC1206FR-0727KL	YAGEO	27 kΩ	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	Yes	Active
CR1206-FX-2702ELF	Bourns Inc.	27 kΩ	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	No	Active
CRCW120627K0FKEA	Vishay Dale	27 kΩ	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	Yes	Active
CRCW120627K0FKEAHP	Vishay Dale	27 kΩ	±1%	0.75	1206	±100ppm/°C	-55 ~ 155	Yes	Active
RC1206FR-0727KL	YAGEO	27 kΩ	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	No	Active
RMCF1206FT27K0	Stackpole Electronics	27 kΩ	±1%	0.25	1206	±100ppm/°C	-55 ~ 155	Yes	Active

Engineering Selection Recommendations

For applications requiring automotive AEC-Q200 qualification, select from: AC1206FR-0727KL (YAGEO), CRCW120627K0FKEA (Vishay Dale), RMCF1206FT27K0 (Stackpole Electronics), or ERJ-8ENF2702V (Panasonic legacy).

For general industrial applications without automotive qualification requirements, CRG1206F27K (TE Connectivity), CR1206-FX-2702ELF (Bourns Inc.), and RC1206FR-0727KL (YAGEO) are suitable alternatives.

All active status parts are recommended for new designs. The ERJ-8ENF2702V should be used only for legacy system maintenance or when existing design documentation specifies this part number.

The CRCW120627K0FKEAHP variant with 0.75W power rating is not interchangeable with the 0.25W ERJ-S08F2702V and should not be selected unless circuit design specifically requires higher power dissipation capability.

Frequently Asked Questions (FAQ)

Q: Can I substitute ERJ-S08F2702V with ERJ-8ENF2702V?

A: Yes, electrically and mechanically. However, ERJ-8ENF2702V carries "Not For New Designs" status. Use only for replacement in existing systems where the original part is specified.

Q: What is the difference between CRCW120627K0FKEA and CRCW120627K0FKEAHP?

A: The primary difference is power rating: CRCW120627K0FKEA is rated 0.25W, while CRCW120627K0FKEAHP is rated 0.75W. Both are 27 kOhm ±1% in 1206 package. Select based on circuit power dissipation requirements.

Q: Are all substitute parts RoHS3 compliant?

A: Yes, all listed parts are ROHS3 compliant. Moisture Sensitivity Level is 1 (Unlimited) for all parts, indicating no special moisture handling requirements.

Q: Which substitute parts have AEC-Q200 automotive qualification?

A: AC1206FR-0727KL, CRCW120627K0FKEA, CRCW120627K0FKEAHP, RMCF1206FT27K0, and ERJ-8ENF2702V carry AEC-Q200 qualification. Select these for automotive applications.

Q: Are there dimensional differences between substitute parts?

A: Minor dimensional variations exist within 1206 package tolerance. Length ranges from 0.122" to 0.126", width is 0.063", and height ranges from 0.024" to 0.030". Verify PCB footprint compatibility for critical applications.

Q: Can I use CRG1206F27K as a direct replacement?

A: Yes, for electrical and mechanical compatibility. CRG1206F27K lacks AEC-Q200 qualification; use only in non-automotive applications or where automotive qualification is not required.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message