ERJ-S08F26R7V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F26R7V is a 26.7 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The product is currently active and available in high volume inventory (870 pcs). Substitute parts are necessary when the primary part is unavailable, when design requirements shift to alternative manufacturers, or when specific feature sets (such as moisture resistance variants) are preferred for particular application environments.

Substiute Parts

ERJ-S08F26R7V

Panasonic Electronic ComponentsIn Stock: 978ERJ-S08F26R7V Datasheet

Current PartRFQ

ERJ-8ENF26R7V

Panasonic Electronic ComponentsIn Stock: 50917ERJ-8ENF26R7V Datasheet

SimilarRFQ

CRCW120626R7FKEA

Vishay DaleIn Stock: 12651CRCW120626R7FKEA Datasheet

SimilarRFQ

RC1206FR-0726R7L

YAGEOIn Stock: 10960RC1206FR-0726R7L Datasheet

SimilarRFQ

RMCF1206FT26R7

Stackpole Electronics IncIn Stock: 3115RMCF1206FT26R7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F26R7V is determined by strict equivalence across the following critical parameters:

• Electrical Specifications: Resistance value (26.7 Ohms), tolerance (±1%), power rating (0.25W), and temperature coefficient (±100ppm/°C) must match exactly
• Package Compatibility: 1206 (3216 Metric) package with identical termination count (2 terminations) and compatible physical dimensions
• Environmental Ratings: Operating temperature range (-55°C ~ 155°C) and moisture sensitivity level (MSL 1) must be maintained
• Regulatory Compliance: RoHS3 compliance and REACH unaffected status required for all substitutes

All four substitute parts listed meet these criteria. Differences in features (anti-sulfur vs. moisture resistant), manufacturer series designation, and product status do not affect functional interchangeability within the specified electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: ERJ-S08F26R7V remains the recommended choice for new designs due to its active product status, anti-sulfur feature set, and adequate inventory availability.

Alternative Selections:

• CRCW120626R7FKEA (Vishay Dale): Active product status with substantial inventory. Suitable for designs where Vishay Dale qualification is required or preferred. Identical electrical and thermal specifications.

• RC1206FR-0726R7L (YAGEO): Active product status with moisture-resistant feature. Appropriate for applications prioritizing moisture resistance over anti-sulfur coating. Dimensions vary slightly (3.10mm L vs. 3.20mm L) but remain within 1206 package specification.

• RMCF1206FT26R7 (Stackpole Electronics): Active product status with AEC-Q200 automotive qualification. Suitable for automotive applications where Stackpole qualification is required. Limited inventory relative to other options.

• ERJ-8ENF26R7V (Panasonic): Not recommended for new designs due to obsolescence status, though high inventory availability (50,842 pcs) may support legacy product support or existing design continuations.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF26R7V be used as a substitute despite "Not For New Designs" status?

A: ERJ-8ENF26R7V meets all electrical, mechanical, and environmental specifications required for functional equivalence. The "Not For New Designs" designation reflects manufacturer lifecycle status, not technical incompatibility. Use is permissible for legacy product support or existing design continuations where supply chain constraints exist.

Q: Are there dimensional differences between substitute parts?

A: Yes. RC1206FR-0726R7L has a length of 3.10mm compared to 3.20mm for other parts. All parts conform to the 1206 (3216 Metric) package standard. Height variations range from 0.024" to 0.028" (0.60mm to 0.70mm). These differences do not affect PCB layout compatibility for standard 1206 footprints.

Q: Which substitute is best for automotive applications?

A: Both ERJ-S08F26R7V and RMCF1206FT26R7 carry AEC-Q200 automotive qualification. ERJ-S08F26R7V is preferred for new automotive designs due to active status. RMCF1206FT26R7 is an acceptable alternative when Stackpole qualification is required.

Q: What is the difference between anti-sulfur and moisture-resistant features?

A: Anti-sulfur coating protects against sulfur-containing atmospheric contaminants common in industrial environments. Moisture-resistant construction (RC1206FR-0726R7L) provides enhanced protection against humidity and condensation. Both features are environmental enhancements; neither affects core electrical performance or substitution eligibility.

Q: Are all substitutes RoHS3 compliant?

A: Yes. All listed parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic components.