ERJ-S08F2672V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F2672V is a 26.7 kOhm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in harsh environments. The product is currently active and available in stock (824 Pcs).

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements shift between automotive and general-purpose applications, or when supply chain optimization is required across multiple manufacturers while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	26.7 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F2672V is determined by strict matching of the following parameters:

Resistance value: 26.7 kOhms (exact match required)
Tolerance: ±1% (exact match required)
Power rating: 0.25W / 1/4W (exact match required)
Package: 1206 (3216 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature coefficient: ±100ppm/°C (exact match required)
Operating temperature range: -55°C ~ 155°C (exact match required)
RoHS compliance: ROHS3 Compliant (exact match required)
Moisture sensitivity: MSL 1 (exact match required)

All identified substitute parts meet these criteria. Variations in features (such as automotive AEC-Q200 qualification or anti-sulfur coating) and physical dimensions (height, length, width) do not disqualify substitution but may affect application suitability based on design requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Op. Temp Range (°C)	Product Status	Features	RoHS	MSL
ERJ-S08F2672V	Panasonic	26.7 kΩ	±1%	0.25	1206	±100	-55 ~ 155	Active	Anti-Sulfur, AEC-Q200	ROHS3	1
ERJ-8ENF2672V	Panasonic	26.7 kΩ	±1%	0.25	1206	±100	-55 ~ 155	Not For New Designs	AEC-Q200	ROHS3	1
CR1206-FX-2672ELF	Bourns Inc.	26.7 kΩ	±1%	0.25	1206	±100	-55 ~ 155	Active	Moisture Resistant	ROHS3	1
CRCW120626K7FKEA	Vishay Dale	26.7 kΩ	±1%	0.25	1206	±100	-55 ~ 155	Active	AEC-Q200	ROHS3	1
RC1206FR-0726K7L	YAGEO	26.7 kΩ	±1%	0.25	1206	±100	-55 ~ 155	Active	Moisture Resistant	ROHS3	1
RMCF1206FT26K7	Stackpole Electronics Inc	26.7 kΩ	±1%	0.25	1206	±100	-55 ~ 155	Active	AEC-Q200	ROHS3	1

Engineering Selection Recommendations

For Active Product Designs: CR1206-FX-2672ELF (Bourns), CRCW120626K7FKEA (Vishay Dale), RC1206FR-0726K7L (YAGEO), and RMCF1206FT26K7 (Stackpole Electronics Inc) are all active products suitable for new designs. These parts maintain full electrical and mechanical compatibility with ERJ-S08F2672V.

For Automotive Applications: CRCW120626K7FKEA (Vishay Dale) and RMCF1206FT26K7 (Stackpole Electronics Inc) carry AEC-Q200 automotive qualification matching the primary part. These are preferred when automotive reliability standards are specified.

For General-Purpose Applications: CR1206-FX-2672ELF (Bourns) and RC1206FR-0726K7L (YAGEO) provide moisture-resistant thick film construction without automotive qualification, suitable for non-automotive applications.

Avoid for New Designs: ERJ-8ENF2672V (Panasonic) is marked "Not For New Designs" and should be used only for legacy system maintenance or repair.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF2672V be used as a direct replacement for ERJ-S08F2672V? A: Electrically and mechanically, yes. Both parts share identical resistance, tolerance, power rating, package, and operating specifications. However, ERJ-8ENF2672V is designated "Not For New Designs" and should be reserved for legacy applications or repair scenarios only.

Q: What is the difference between AEC-Q200 qualified parts and moisture-resistant parts? A: AEC-Q200 qualified parts (CRCW120626K7FKEA, RMCF1206FT26K7) meet automotive reliability standards and are suitable for automotive and harsh-environment applications. Moisture-resistant parts (CR1206-FX-2672ELF, RC1206FR-0726K7L) provide enhanced moisture protection without automotive qualification and are suitable for general-purpose and industrial applications.

Q: Are there physical dimension differences between substitute parts? A: Minor variations exist in height and length within the 1206 package specification. ERJ-S08F2672V and RMCF1206FT26K7 have maximum seated height of 0.028" (0.70mm), while CRCW120626K7FKEA is 0.024" (0.60mm) and CR1206-FX-2672ELF is 0.030" (0.75mm). Length varies between 0.122" and 0.126". These variations remain within 1206 package tolerance and do not affect PCB layout compatibility.

Q: Which substitute part has the best availability? A: ERJ-8ENF2672V has the highest inventory (133,106 Pcs), followed by CR1206-FX-2672ELF (26,061 Pcs) and CRCW120626K7FKEA (24,346 Pcs). For active product designs, CR1206-FX-2672ELF or CRCW120626K7FKEA are recommended based on application requirements.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level, matching the primary part specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message