ERJ-S08F2432V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F2432V is a 24.3 kOhms ±1% thick film chip resistor manufactured by Panasonic Electronic Components in the 1206 (3216 Metric) package format. This component is rated for 0.25W (1/4W) power dissipation and is designed for automotive applications with AEC-Q200 qualification and anti-sulfur protection. The part is currently in active production status with 781 pieces available in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative sourcing is required for supply chain resilience, or when design flexibility permits the use of functionally equivalent components from different manufacturers that meet the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Resistance	24.3 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F2432V is determined by strict equivalence across the following critical parameters:

Resistance value: 24.3 kOhms
Tolerance: ±1%
Power rating: 0.25W (1/4W)
Package format: 1206 (3216 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Number of terminations: 2
RoHS compliance: ROHS3 Compliant
Moisture sensitivity level: 1 (Unlimited)

All substitute parts listed below meet these electrical and mechanical requirements. Variations in secondary features such as specific protective coatings (anti-sulfur vs. moisture-resistant), automotive certifications, or packaging format (Tape & Reel vs. Cut Tape) do not affect functional substitutability but may influence selection based on application requirements and supply availability.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Product Status	RoHS	MSL
ERJ-S08F2432V	Panasonic Electronic Components	24.3 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	ROHS3	1
ERJ-8ENF2432V	Panasonic Electronic Components	24.3 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Not For New Designs	ROHS3	1
CR1206-FX-2432ELF	Bourns Inc.	24.3 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	ROHS3	1
CRCW120624K3FKEA	Vishay Dale	24.3 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	ROHS3	1
RC1206FR-0724K3L	YAGEO	24.3 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	ROHS3	1
RMCF1206FT24K3	Stackpole Electronics Inc	24.3 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	ROHS3	1

Engineering Selection Recommendations

For new designs and active production applications, select from parts with Active product status: CR1206-FX-2432ELF (Bourns), CRCW120624K3FKEA (Vishay Dale), RC1206FR-0724K3L (YAGEO), or RMCF1206FT24K3 (Stackpole Electronics). These parts maintain current manufacturing support and full compliance with ROHS3 and MSL 1 requirements.

The ERJ-8ENF2432V carries a "Not For New Designs" status and should be used only for legacy system maintenance or when existing inventory must be consumed in ongoing production runs.

For automotive applications requiring AEC-Q200 certification, prioritize CRCW120624K3FKEA (Vishay Dale), RMCF1206FT24K3 (Stackpole Electronics), or the primary part ERJ-S08F2432V (Panasonic). The CR1206-FX-2432ELF (Bourns) and RC1206FR-0724K3L (YAGEO) are qualified for moisture-resistant applications but do not carry explicit automotive ratings in the provided specifications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF2432V be used as a direct replacement for ERJ-S08F2432V?

A: Yes, the ERJ-8ENF2432V meets all electrical and mechanical substitution criteria. However, it carries a "Not For New Designs" status. Use this part only for legacy system support or inventory management in existing production.

Q: What is the difference between anti-sulfur and moisture-resistant variants?

A: The ERJ-S08F2432V includes anti-sulfur protection, while CR1206-FX-2432ELF and RC1206FR-0724K3L feature moisture-resistant coatings. Both protect the resistor element but address different environmental stressors. Selection depends on the specific operating environment of the application.

Q: Are all substitute parts suitable for automotive applications?

A: CRCW120624K3FKEA, RMCF1206FT24K3, and ERJ-S08F2432V carry AEC-Q200 automotive qualification. CR1206-FX-2432ELF and RC1206FR-0724K3L do not list explicit automotive ratings in the provided data and should be evaluated against specific automotive requirements before selection.

Q: Does packaging format affect substitutability?

A: All parts use the 1206 (3216 Metric) package and are electrically and mechanically equivalent. Packaging format differences (Tape & Reel vs. Cut Tape) relate to supply and handling logistics, not component performance or PCB compatibility.

Q: Are all substitute parts ROHS3 compliant?

A: Yes, all listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level, matching the primary part specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message