Equivalent & Substitute Parts for ERJ-S08F2320V

Part Overview

The ERJ-S08F2320V is a 232 Ohm ±1% 0.25W chip resistor in 1206 package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently in active production status with 937 units in stock.

Substitute parts become necessary when the primary part faces supply constraints, extended lead times, or when design flexibility permits equivalent alternatives that meet the same electrical and mechanical specifications.

Substiute Parts

ERJ-S08F2320V

Panasonic Electronic ComponentsIn Stock: 999ERJ-S08F2320V Datasheet

Current PartRFQ

ERJ-8ENF2320V

Panasonic Electronic ComponentsIn Stock: 97288ERJ-8ENF2320V Datasheet

SimilarRFQ

CRCW1206232RFKEA

Vishay DaleIn Stock: 20212CRCW1206232RFKEA Datasheet

SimilarRFQ

RC1206FR-07232RL

YAGEOIn Stock: 101064RC1206FR-07232RL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F2320V is determined by strict equivalence across the following parameters:

• Resistance value: 232 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

All identified substitute parts meet these core electrical and mechanical requirements. Variations in packaging format (Tape & Reel versus Cut Tape), product status, and specific feature sets (anti-sulfur versus moisture-resistant) do not affect functional interchangeability in applications where these specifications are met.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are electrically and mechanically equivalent to the ERJ-S08F2320V and are suitable for direct replacement in applications requiring 232 Ohm ±1% 0.25W 1206 resistors.

CRCW1206232RFKEA (Vishay Dale) and RC1206FR-07232RL (YAGEO) are both in active production status and carry full ROHS3 compliance and MSL 1 ratings, making them preferred choices for new designs and long-term supply security.

ERJ-8ENF2320V (Panasonic) carries a "Not For New Designs" status, indicating this part is in mature phase production. While electrically equivalent and currently available in high volume (97,190 units), this part should be considered only for legacy system maintenance or when supply of active-status alternatives is constrained.

All parts meet AEC-Q200 automotive qualification requirements and operate across the full -55°C to 155°C temperature range with ±100ppm/°C temperature coefficient stability.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF2320V be used as a direct replacement for ERJ-S08F2320V?

A: Yes. Both parts share identical electrical specifications (232 Ohms ±1%, 0.25W, ±100ppm/°C) and package format (1206). The primary difference is product lifecycle status. ERJ-8ENF2320V is marked "Not For New Designs," indicating it is in mature production phase. For new designs, CRCW1206232RFKEA or RC1206FR-07232RL are recommended.

Q: Are there differences in physical dimensions between substitute parts?

A: Minor variations exist within tolerance. ERJ-S08F2320V and ERJ-8ENF2320V specify maximum seated height of 0.028" (0.70mm). CRCW1206232RFKEA specifies 0.024" (0.60mm), and RC1206FR-07232RL specifies 0.026" (0.65mm). All parts conform to 1206 package standard and are suitable for standard PCB assembly processes. Length and width dimensions are equivalent across all parts (3.20mm x 1.60mm nominal).

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Both are surface mount packaging formats suitable for automated assembly. Tape & Reel (TR) is continuous reel format for high-volume production lines. Cut Tape (CT) is pre-cut format for lower-volume or mixed-component assembly. CRCW1206232RFKEA is available in Cut Tape and Digi-Reel format, while ERJ-S08F2320V, ERJ-8ENF2320V, and RC1206FR-07232RL are supplied in Tape & Reel format. Selection depends on assembly equipment and production volume requirements.

Q: Do all substitute parts meet automotive qualification requirements?

A: Yes. ERJ-S08F2320V, ERJ-8ENF2320V, and CRCW1206232RFKEA all carry AEC-Q200 automotive qualification. RC1206FR-07232RL does not specify AEC-Q200 rating in the provided data but meets all equivalent electrical and mechanical specifications. For applications requiring explicit AEC-Q200 certification, ERJ-S08F2320V, ERJ-8ENF2320V, or CRCW1206232RFKEA are specified choices.

Q: Are all parts RoHS3 compliant?

A: Yes. All four parts (ERJ-S08F2320V, ERJ-8ENF2320V, CRCW1206232RFKEA, and RC1206FR-07232RL) are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, suitable for unrestricted storage and handling.