Equivalent & Substitute Parts for ERJ-S08F2213V

Part Overview

The ERJ-S08F2213V is a 221 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in harsh environments. The product is currently active in production. Substitute parts are necessary when the primary part is unavailable, when design requirements mandate alternative certifications or features, or when procurement optimization requires sourcing from multiple qualified manufacturers.

Key Parameters

Parameter	Value
Resistance	221 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F2213V is determined by strict equivalence across the following parameters: resistance value (221 kOhms), tolerance (±1%), power rating (0.25W), package type (1206), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (ROHS3, REACH Unaffected). All substitute parts listed meet these core electrical and mechanical requirements. Secondary differentiators include product status (active vs. not for new designs), specific feature sets (anti-sulfur, automotive AEC-Q200, moisture resistant), packaging format (tape & reel vs. cut tape), and physical dimensions (height variation within tolerance).

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Features	Product Status	Packaging
ERJ-S08F2213V	Panasonic Electronic Components	221 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Anti-Sulfur, AEC-Q200	Active	Tape & Reel
ERJ-8ENF2213V	Panasonic Electronic Components	221 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	AEC-Q200	Not For New Designs	Tape & Reel
CR1206-FX-2213ELF	Bourns Inc.	221 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active	Tape & Reel
CRCW1206221KFKEA	Vishay Dale	221 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	AEC-Q200	Active	Tape & Reel
RC1206FR-07221KL	YAGEO	221 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active	Tape & Reel
RMCF1206FG221K	Stackpole Electronics Inc	221 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	AEC-Q200	Active	Cut Tape
RMCF1206FT221K	Stackpole Electronics Inc	221 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	AEC-Q200	Active	Tape & Reel

Engineering Selection Recommendations

For new designs, select from parts with Active product status: CRCW1206221KFKEA (Vishay Dale), CR1206-FX-2213ELF (Bourns), RC1206FR-07221KL (YAGEO), RMCF1206FG221K (Stackpole), or RMCF1206FT221K (Stackpole). All are ROHS3 compliant and REACH unaffected.

For automotive applications requiring AEC-Q200 qualification, use CRCW1206221KFKEA, RMCF1206FG221K, or RMCF1206FT221K. The original ERJ-S08F2213V includes anti-sulfur coating; this feature is not present in all substitutes.

For applications where moisture resistance is a primary requirement, CR1206-FX-2213ELF and RC1206FR-07221KL are specified with moisture-resistant characteristics.

The ERJ-8ENF2213V is functionally equivalent but marked "Not For New Designs" and should be used only for legacy system maintenance or repair.

Packaging format selection depends on assembly requirements: tape & reel format is standard for automated pick-and-place operations; cut tape format (RMCF1206FG221K) is suitable for manual assembly or lower-volume applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF2213V replace ERJ-S08F2213V in new designs? A: ERJ-8ENF2213V is electrically and mechanically equivalent but carries "Not For New Designs" status. It is suitable only for replacement or repair of existing systems. For new designs, select from active-status alternatives.

Q: What is the difference between anti-sulfur and moisture-resistant features? A: Anti-sulfur coating protects against sulfur-containing atmospheric corrosion, typical in industrial environments. Moisture-resistant formulation protects against humidity and condensation. These are distinct protective mechanisms; the original part includes anti-sulfur, while some substitutes emphasize moisture resistance instead.

Q: Are all substitute parts compatible with automated assembly equipment? A: All parts listed in tape & reel packaging (TR) are compatible with standard pick-and-place equipment. RMCF1206FG221K is supplied in cut tape (CT) format and requires manual handling or specialized equipment.

Q: Do all substitutes meet automotive qualification requirements? A: Only CRCW1206221KFKEA, RMCF1206FG221K, and RMCF1206FT221K carry AEC-Q200 automotive qualification. CR1206-FX-2213ELF and RC1206FR-07221KL do not have this certification.

Q: What is the significance of physical dimension variations? A: Height variations (0.024" to 0.030" seated maximum) are within standard 1206 package tolerance and do not affect electrical performance or PCB layout. Verify clearance in applications with height constraints.

Q: Are all parts ROHS3 compliant? A: Yes, all listed parts are ROHS3 compliant and REACH unaffected, meeting current environmental regulations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message