ERJ-S08F1R80V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1R80V is a 1.8 Ohm ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and industrial applications requiring high reliability. The part is currently in active production status with 811 units available in stock.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications are maintained across alternative part numbers within the same manufacturer's product line.

Substiute Parts

ERJ-S08F1R80V

Panasonic Electronic ComponentsIn Stock: 862ERJ-S08F1R80V Datasheet

Current PartRFQ

ERJ-U08F1R80V

Panasonic Electronic ComponentsIn Stock: 5795ERJ-U08F1R80V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F1R80V is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Resistance value: 1.8 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: -100 / +600 ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Specifications:

• Package type: 1206 (3216 Metric)
• Physical dimensions: 0.126" L x 0.063" W (3.20mm x 1.60mm)
• Maximum seated height: 0.028" (0.70mm)
• Number of terminations: 2

Compliance & Features:

• Composition: Thick Film
• Anti-sulfur coating
• Automotive AEC-Q200 qualification
• RoHS3 compliance
• REACH unaffected status
• Moisture sensitivity level: 1 (Unlimited)

Substitute parts must match all parameters listed above to ensure functional and mechanical interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the ERJ-S08F1R80V and ERJ-U08F1R80V are active production parts manufactured by Panasonic Electronic Components with identical electrical, mechanical, and compliance specifications. The parts are functionally equivalent for all circuit applications requiring a 1.8 Ohm ±1% 0.25W thick film resistor in 1206 package format.

Selection between these parts may be based on inventory availability. The ERJ-S08F1R80V has 811 units in stock, while the ERJ-U08F1R80V has 5776 units in stock. Both parts maintain ROHS3 compliance, REACH unaffected status, and automotive AEC-Q200 qualification, ensuring suitability for regulated applications.

The difference between the two part numbers reflects internal Panasonic product line segmentation (ERJ-S08 series versus ERJ-U08 series) with no impact on functional performance or mechanical compatibility.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U08F1R80V be used as a direct replacement for ERJ-S08F1R80V?

A: Yes. Both parts are electrically and mechanically identical with matching resistance values (1.8 Ohms ±1%), power ratings (0.25W), package dimensions (1206), and compliance certifications. Direct substitution is supported for all circuit applications.

Q: Are there any differences in the 1206 package dimensions between these parts?

A: No. Both parts conform to identical 1206 (3216 Metric) package specifications with dimensions of 0.126" L x 0.063" W (3.20mm x 1.60mm) and maximum seated height of 0.028" (0.70mm). PCB footprints and assembly processes are interchangeable.

Q: Do both parts meet automotive qualification requirements?

A: Yes. Both ERJ-S08F1R80V and ERJ-U08F1R80V carry automotive AEC-Q200 qualification and anti-sulfur coating, meeting reliability standards for automotive and industrial applications operating across the -55°C ~ 155°C temperature range.

Q: What is the significance of the different series designations (ERJ-S08 versus ERJ-U08)?

A: The series designation reflects Panasonic's internal product line organization. Both series share identical electrical specifications, mechanical properties, and compliance certifications. The series difference does not affect functional performance or interchangeability.

Q: Are both parts RoHS3 compliant?

A: Yes. Both ERJ-S08F1R80V and ERJ-U08F1R80V are ROHS3 compliant with moisture sensitivity level 1 (unlimited), making them suitable for applications subject to RoHS directives and environmental regulations.

Q: What is the tape and reel packaging configuration for these parts?

A: Both parts are supplied in Tape & Reel (TR) packaging format, standard for automated PCB assembly processes. The packaging maintains moisture sensitivity level 1 (unlimited), allowing extended shelf life without special storage requirements.