ERJ-S08F1872V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1872V is a 1206 package thick film chip resistor manufactured by Panasonic Electronic Components, rated at 18.7 kOhms with ±1% tolerance and 0.25W power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently in active production status with 760 units in stock.

Substitute parts become necessary when the primary part reaches end-of-life status, inventory constraints occur, or design requirements mandate alternative qualified sources for supply chain resilience and cost optimization.

Key Parameters

Parameter	Value
Resistance	18.7 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Resistance value: 18.7 kOhms
Tolerance: ±1%
Power rating: 0.25W (1/4W)
Package: 1206 (3216 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Termination count: 2
RoHS3 compliance

All substitute parts listed meet these core electrical and mechanical specifications. Variations in product status, packaging format (Tape & Reel vs. Cut Tape), and optional features (anti-sulfur coating, AEC-Q200 rating) are noted but do not prevent functional substitution when these core parameters align.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Op. Temp Range (°C)	Product Status	AEC-Q200	Inventory (Pcs)
ERJ-S08F1872V	Panasonic	18.7 kΩ	±1%	0.25	1206	±100	-55 ~ 155	Active	Yes	760
ERJ-8ENF1872V	Panasonic	18.7 kΩ	±1%	0.25	1206	±100	-55 ~ 155	Not For New Designs	Yes	35329
CRCW120618K7FKEA	Vishay Dale	18.7 kΩ	±1%	0.25	1206	±100	-55 ~ 155	Active	Yes	38553
RC1206FR-0718K7L	YAGEO	18.7 kΩ	±1%	0.25	1206	±100	-55 ~ 155	Active	No	41057
RMCF1206FT18K7	Stackpole Electronics Inc	18.7 kΩ	±1%	0.25	1206	±100	-55 ~ 155	Active	Yes	10114

Engineering Selection Recommendations

For applications requiring automotive AEC-Q200 qualification, select from CRCW120618K7FKEA (Vishay Dale), RMCF1206FT18K7 (Stackpole Electronics Inc), or ERJ-S08F1872V (Panasonic). All three parts maintain active production status and full AEC-Q200 compliance.

The ERJ-8ENF1872V (Panasonic) carries "Not For New Designs" status and should be used only for legacy system maintenance or repair applications where design continuity is required.

The RC1206FR-0718K7L (YAGEO) lacks AEC-Q200 certification but meets all core electrical and mechanical specifications. This part is suitable for non-automotive applications where automotive qualification is not mandated.

All substitute parts are RoHS3 compliant with MSL 1 rating, ensuring compatibility with standard PCB assembly processes and long-term storage without moisture sensitivity constraints.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF1872V be used in new automotive designs? A: No. ERJ-8ENF1872V carries "Not For New Designs" status. Use ERJ-S08F1872V, CRCW120618K7FKEA, or RMCF1206FT18K7 for new automotive applications requiring AEC-Q200 qualification.

Q: What is the difference between Tape & Reel and Cut Tape packaging? A: Both packaging formats contain identical components. Tape & Reel (TR) is optimized for high-volume automated assembly. Cut Tape (CT) is suitable for lower-volume or manual assembly operations. Electrical and mechanical performance are equivalent.

Q: Is RC1206FR-0718K7L suitable for automotive applications? A: RC1206FR-0718K7L meets all core electrical specifications but lacks AEC-Q200 certification. Use this part only for non-automotive applications or where automotive qualification is not a design requirement.

Q: Are all substitute parts pin-compatible with ERJ-S08F1872V? A: Yes. All listed substitutes use the 1206 package with 2 terminations and identical footprint dimensions, ensuring direct PCB layout compatibility.

Q: What is the significance of the anti-sulfur coating on ERJ-S08F1872V? A: Anti-sulfur coating provides enhanced corrosion resistance in high-sulfur environments. This feature is specific to ERJ-S08F1872V and ERJ-8ENF1872V. Other substitutes without this coating are functionally equivalent for standard operating environments.

Q: Can these parts be used interchangeably in existing designs? A: Yes, provided the design does not mandate specific manufacturer part numbers or certifications. Verify that AEC-Q200 requirements, if present in the original design, are met by the substitute part.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message