ERJ-S08F1870V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1870V is a 187 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently in active production status with 1077 units in stock.

Substitute parts are necessary when the primary part becomes unavailable, when alternative packaging formats are required, or when design flexibility across qualified manufacturers is needed while maintaining identical electrical and mechanical specifications.

Substiute Parts

ERJ-S08F1870V

Panasonic Electronic ComponentsIn Stock: 1095ERJ-S08F1870V Datasheet

Current PartRFQ

ERJ-8ENF1870V

Panasonic Electronic ComponentsIn Stock: 15645ERJ-8ENF1870V Datasheet

SimilarRFQ

CRCW1206187RFKEA

Vishay DaleIn Stock: 14900CRCW1206187RFKEA Datasheet

SimilarRFQ

RC1206FR-07187RL

YAGEOIn Stock: 44253RC1206FR-07187RL Datasheet

SimilarRFQ

RMCF1206FT187R

Stackpole Electronics IncIn Stock: 56805RMCF1206FT187R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F1870V is determined by strict equivalence across the following parameters:

• Resistance value: 187 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical requirements. Variations in packaging format (Tape & Reel vs. Cut Tape), manufacturer-specific features (anti-sulfur coating, moisture resistance), and product lifecycle status do not affect functional interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

For new designs and active production, CRCW1206187RFKEA (Vishay Dale), RC1206FR-07187RL (YAGEO), and RMCF1206FT187R (Stackpole Electronics Inc) are preferred substitutes. All three maintain active product status and full RoHS3 compliance.

The ERJ-8ENF1870V (Panasonic) is marked "Not For New Designs" and should be used only for legacy system maintenance or existing design continuity where supply of the primary ERJ-S08F1870V is exhausted.

All listed substitutes are qualified to AEC-Q200 automotive standards or equivalent moisture-resistant specifications, ensuring reliability in automotive and industrial applications. Selection among active alternatives should be based on supply availability, packaging format requirements, and established supplier relationships.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF1870V be used as a direct replacement for ERJ-S08F1870V?

A: Yes, electrically and mechanically equivalent. However, ERJ-8ENF1870V is marked "Not For New Designs." Use only for legacy system support or when ERJ-S08F1870V supply is unavailable. The primary difference is packaging format (Cut Tape & Digi-Reel® vs. Tape & Reel).

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) is supplied on continuous carrier tape in reel format for automated assembly. Cut Tape (CT) is supplied in shorter tape segments. Both contain identical components; packaging choice depends on production volume and assembly equipment compatibility.

Q: Are all substitute parts automotive-qualified?

A: ERJ-S08F1870V, CRCW1206187RFKEA, and RMCF1206FT187R carry explicit AEC-Q200 automotive qualification. RC1206FR-07187RL is specified as moisture-resistant thick film. All meet the operating temperature range and RoHS3 compliance required for automotive applications.

Q: Can I mix manufacturers in the same assembly?

A: Yes. All listed parts meet identical electrical specifications (187 Ω ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C). Mixing manufacturers is acceptable from a functional standpoint. Verify with your quality and procurement procedures for any internal requirements.

Q: What does MSL 1 (Unlimited) mean?

A: Moisture Sensitivity Level 1 indicates the component has unlimited shelf life and requires no special moisture-control handling during storage or assembly. No baking or dry-pack storage is necessary.