ERJ-S08F16R2V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F16R2V is a 16.2 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The part is currently in active production status. Substitute parts are necessary when the primary part is unavailable, when design requirements shift to alternative manufacturers, or when supply chain optimization is needed while maintaining equivalent electrical and mechanical performance.

Substiute Parts

ERJ-S08F16R2V

Panasonic Electronic ComponentsIn Stock: 1031ERJ-S08F16R2V Datasheet

Current PartRFQ

ERJ-8ENF16R2V

Panasonic Electronic ComponentsIn Stock: 26579ERJ-8ENF16R2V Datasheet

SimilarRFQ

CRCW120616R2FKEA

Vishay DaleIn Stock: 27856CRCW120616R2FKEA Datasheet

SimilarRFQ

RC1206FR-0716R2L

YAGEOIn Stock: 8260RC1206FR-0716R2L Datasheet

SimilarRFQ

RMCF1206FT16R2

Stackpole Electronics IncIn Stock: 10020RMCF1206FT16R2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F16R2V is determined by strict equivalence across the following parameters:

• Resistance value: 16.2 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Package: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)
• Moisture sensitivity: MSL 1 (exact match required)

All four substitute parts listed meet these criteria and are therefore electrically and mechanically interchangeable with the ERJ-S08F16R2V in applications where the specified parameters are required.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are electrically and mechanically equivalent to the ERJ-S08F16R2V and meet the same compliance and certification requirements (ROHS3, MSL 1, REACH Unaffected, EAR99).

For new designs, select from the three parts with Active product status: CRCW120616R2FKEA (Vishay Dale), RC1206FR-0716R2L (YAGEO), or RMCF1206FT16R2 (Stackpole Electronics Inc). The ERJ-8ENF16R2V carries a "Not For New Designs" status and should be used only for legacy design maintenance or when supply constraints require it.

All substitute parts are qualified to AEC-Q200 automotive standards or equivalent moisture-resistant specifications, making them suitable for automotive and industrial applications. Physical dimensions vary slightly between manufacturers (height range 0.024" to 0.028"), but all conform to the 1206 package standard and are compatible with standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF16R2V be used as a direct replacement for ERJ-S08F16R2V?

A: Yes, ERJ-8ENF16R2V is electrically and mechanically equivalent. However, it carries a "Not For New Designs" status. Use it only for legacy applications or when other substitutes are unavailable.

Q: What is the difference between the anti-sulfur feature of ERJ-S08F16R2V and the standard automotive AEC-Q200 qualification of other substitutes?

A: The ERJ-S08F16R2V includes explicit anti-sulfur coating. Other substitutes carry AEC-Q200 automotive qualification or moisture-resistant specifications. Both approaches provide environmental protection; the specific feature set depends on application requirements and supplier manufacturing processes.

Q: Are all substitute parts suitable for automotive applications?

A: ERJ-8ENF16R2V, CRCW120616R2FKEA, and RMCF1206FT16R2 carry AEC-Q200 automotive qualification. RC1206FR-0716R2L is specified as moisture-resistant thick film. All meet the operating temperature range and reliability requirements for automotive use.

Q: Do the physical dimension variations between substitutes affect PCB assembly compatibility?

A: No. All parts conform to the 1206 (3216 Metric) package standard. Height variations (0.024" to 0.028") are within standard PCB assembly tolerances and do not affect placement, soldering, or functional performance.

Q: Which substitute offers the best supply availability?

A: ERJ-8ENF16R2V has the highest inventory (26,527 pcs). CRCW120616R2FKEA (27,765 pcs) and RMCF1206FT16R2 (9,946 pcs) also maintain substantial stock. RC1206FR-0716R2L has lower inventory (8,214 pcs). Availability should be confirmed with your supplier for current project timelines.

Q: Can these parts be used interchangeably in the same PCB design without layout modifications?

A: Yes. All substitute parts use the same 1206 package footprint and have identical electrical specifications. No PCB layout changes are required for substitution.