ERJ-S08F1690V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1690V is a 169 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The product is currently active and available in high volume inventory.

Substitute parts are necessary when the primary part becomes unavailable, when design requirements mandate alternative manufacturers for supply chain redundancy, or when specific feature sets (such as moisture resistance or alternative automotive certifications) are required for particular applications.

Substiute Parts

ERJ-S08F1690V

Panasonic Electronic ComponentsIn Stock: 807ERJ-S08F1690V Datasheet

Current PartRFQ

ERJ-8ENF1690V

Panasonic Electronic ComponentsIn Stock: 60820ERJ-8ENF1690V Datasheet

SimilarRFQ

CRCW1206169RFKEA

Vishay DaleIn Stock: 7702CRCW1206169RFKEA Datasheet

SimilarRFQ

RC1206FR-07169RL

YAGEOIn Stock: 85482RC1206FR-07169RL Datasheet

SimilarRFQ

RMCF1206FT169R

Stackpole Electronics IncIn Stock: 37276RMCF1206FT169R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F1690V is determined by strict equivalence across the following critical parameters:

• Resistance value: 169 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Package: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)
• Moisture sensitivity: MSL 1 (exact match required)

All substitute parts listed meet these criteria. Variations in physical dimensions (length, width, height) within standard manufacturing tolerances, manufacturer-specific feature sets (anti-sulfur coating, moisture resistance), and product lifecycle status do not disqualify substitution when core electrical and mechanical parameters are identical.

Parameter Comparison

Engineering Selection Recommendations

For new designs, select from parts with Active product status: ERJ-S08F1690V (Panasonic), CRCW1206169RFKEA (Vishay Dale), RC1206FR-07169RL (YAGEO), or RMCF1206FT169R (Stackpole Electronics Inc).

The ERJ-8ENF1690V carries a "Not For New Designs" status and should be used only for legacy design maintenance or when existing inventory constraints require its use.

All listed substitutes carry ROHS3 compliance and MSL 1 rating, meeting environmental and moisture handling requirements for standard manufacturing and storage conditions. Panasonic and Stackpole variants include automotive AEC-Q200 qualification; YAGEO variant specifies moisture resistance as a primary feature. Selection between these options depends on supply chain preferences, existing manufacturer relationships, and specific application certifications required by end-use standards.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF1690V be used as a direct replacement for ERJ-S08F1690V?

A: Yes, electrically and mechanically equivalent. However, ERJ-8ENF1690V is marked "Not For New Designs." Use only for legacy product support or when supply constraints require it.

Q: What is the difference between anti-sulfur and moisture-resistant variants?

A: Anti-sulfur coating (ERJ-S08F1690V) protects against sulfur-containing atmospheric contaminants. Moisture-resistant formulation (RC1206FR-07169RL) addresses humidity exposure. Both meet MSL 1 requirements. Selection depends on environmental exposure conditions in the application.

Q: Are all substitutes suitable for automotive applications?

A: ERJ-S08F1690V, ERJ-8ENF1690V, and RMCF1206FT169R carry AEC-Q200 automotive qualification. RC1206FR-07169RL and CRCW1206169RFKEA do not list AEC-Q200 rating. For automotive designs requiring AEC-Q200 compliance, use only qualified variants.

Q: Do physical dimension variations affect PCB layout?

A: All parts use 1206 (3216 Metric) package with standard footprint dimensions. Minor variations in length (0.122" to 0.126"), width (0.063"), and height (0.024" to 0.028") fall within standard 1206 package tolerances and do not require PCB layout changes.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, provided the design does not mandate specific manufacturer certifications (such as AEC-Q200) or feature requirements (such as anti-sulfur coating). Verify application specifications before substitution.