ERJ-S08F1600V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1600V is a 160 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring reliability in harsh environments. The product is currently active in production with 1094 units in stock.

Substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design flexibility allows for equivalent alternatives that meet the same electrical and mechanical specifications. All substitute parts listed maintain identical electrical characteristics and package dimensions required for direct board-level replacement.

Key Parameters

Parameter	Value
Resistance	160 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F1600V is determined by strict equivalence across the following parameters:

Resistance value: 160 Ohms
Tolerance: ±1%
Power rating: 0.25W (1/4W)
Package: 1206 (3216 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
RoHS3 compliance
MSL rating: 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical requirements. Variations in physical dimensions (length, width, height) within the 1206 package specification, manufacturing features (anti-sulfur coating, moisture resistance), and product status do not affect functional interchangeability at the circuit level.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Product Status	RoHS	MSL
ERJ-S08F1600V	Panasonic	160 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Active	ROHS3	1
ERJ-8ENF1600V	Panasonic	160 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Not For New Designs	ROHS3	1
AC1206FR-07160RL	YAGEO	160 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Active	ROHS3	1
CR1206-FX-1600ELF	Bourns Inc.	160 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Active	ROHS3	1
CRCW1206160RFKEA	Vishay Dale	160 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Active	ROHS3	1
RC1206FR-07160RL	YAGEO	160 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Active	ROHS3	1
RMCF1206FT160R	Stackpole Electronics Inc	160 Ω	±1%	0.25	1206	±100ppm/°C	-55~155°C	Active	ROHS3	1

Engineering Selection Recommendations

For new designs, select from parts with Active product status: AC1206FR-07160RL, CR1206-FX-1600ELF, CRCW1206160RFKEA, RC1206FR-07160RL, or RMCF1206FT160R. All five alternatives are currently in production and carry ROHS3 compliance with unlimited moisture sensitivity rating.

For designs requiring automotive AEC-Q200 qualification, the following parts meet this requirement: ERJ-S08F1600V (primary), CRCW1206160RFKEA, and RMCF1206FT160R. The ERJ-8ENF1600V carries AEC-Q200 rating but is marked "Not For New Designs" and should be avoided in new development.

AC1206FR-07160RL and RC1206FR-07160RL from YAGEO offer the highest inventory availability (9571 and 95796 units respectively) and are suitable for applications where automotive qualification is not required. CR1206-FX-1600ELF from Bourns provides the largest inventory position (59420 units) among all alternatives.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF1600V be used as a direct replacement for ERJ-S08F1600V?

A: Electrically and mechanically, yes. Both parts share identical resistance, tolerance, power rating, package, temperature coefficient, and operating range. However, ERJ-8ENF1600V is marked "Not For New Designs" and should only be used in legacy product support or when ERJ-S08F1600V is unavailable. The primary difference is the absence of anti-sulfur coating in the ERJ-8EN series.

Q: What is the difference between parts with and without AEC-Q200 rating?

A: AEC-Q200 certification indicates the part meets automotive industry reliability standards for passive components. Parts with this rating (ERJ-S08F1600V, CRCW1206160RFKEA, RMCF1206FT160R) are qualified for automotive applications. Parts without this rating (AC1206FR-07160RL, CR1206-FX-1600ELF, RC1206FR-07160RL) are suitable for general industrial and consumer applications but should not be used in automotive designs requiring AEC-Q200 compliance.

Q: Are there physical dimension differences between substitute parts?

A: Minor variations exist within the 1206 package specification. Length ranges from 0.122" to 0.126" (3.10mm to 3.20mm), and height ranges from 0.024" to 0.030" (0.60mm to 0.75mm). These variations are within standard 1206 package tolerances and do not affect PCB layout or assembly compatibility.

Q: Do all substitute parts have the same moisture sensitivity rating?

A: Yes. All parts listed carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Which substitute offers the best availability?

A: RC1206FR-07160RL from YAGEO has the highest inventory position with 95796 units in stock, followed by CR1206-FX-1600ELF from Bourns with 59420 units. For automotive-qualified alternatives, RMCF1206FT160R from Stackpole Electronics offers 46281 units.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message