ERJ-S08F1333V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1333V is a 133 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in harsh environments. The part is currently in active production status with 900 units in stock.

Substitute parts become necessary when the primary part faces supply constraints, extended lead times, or when design flexibility permits equivalent alternatives that meet the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Resistance	133 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F1333V is determined by strict equivalence across the following parameters:

Resistance value: 133 kOhms (exact match required)
Tolerance: ±1% (exact match required)
Power rating: 0.25W / 1/4W (exact match required)
Package: 1206 (3216 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature coefficient: ±100ppm/°C (exact match required)
Operating temperature range: -55°C ~ 155°C (exact match required)
RoHS compliance: ROHS3 Compliant (exact match required)
Moisture sensitivity: MSL 1 (exact match required)

All identified substitute parts meet these core electrical and mechanical parameters. Variations in physical dimensions (length, width, height) within standard tolerances and differences in specific feature sets (anti-sulfur coating, moisture resistance, automotive qualification) do not disqualify substitution when the above parameters align.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Product Status	RoHS	MSL	Inventory (Pcs)
ERJ-S08F1333V	Panasonic Electronic Components	133 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	ROHS3	1	900
ERJ-8ENF1333V	Panasonic Electronic Components	133 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Not For New Designs	ROHS3	1	43011
CR1206-FX-1333ELF	Bourns Inc.	133 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	ROHS3	1	19960
CRCW1206133KFKEA	Vishay Dale	133 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	ROHS3	1	15926
RC1206FR-07133KL	YAGEO	133 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	ROHS3	1	50344
RMCF1206FT133K	Stackpole Electronics Inc	133 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Active	ROHS3	1	820

Engineering Selection Recommendations

Primary Selection (Active Status, Preferred): CR1206-FX-1333ELF (Bourns), CRCW1206133KFKEA (Vishay Dale), RC1206FR-07133KL (YAGEO), and RMCF1206FT133K (Stackpole Electronics) are all in active production status and suitable for new designs. These parts maintain full ROHS3 compliance and MSL 1 rating.

Secondary Selection (Legacy Status): ERJ-8ENF1333V (Panasonic) is marked "Not For New Designs" and should be used only when existing inventory constraints or design continuity requirements justify its selection. This part remains electrically and mechanically equivalent but carries obsolescence risk.

Compliance Considerations: All substitute parts listed are ROHS3 compliant and carry MSL 1 (unlimited moisture sensitivity level), ensuring compatibility with standard PCB assembly and storage conditions. Automotive-qualified variants (ERJ-S08F1333V, ERJ-8ENF1333V, CRCW1206133KFKEA, RMCF1206FT133K) carry AEC-Q200 certification; non-automotive variants (CR1206-FX-1333ELF, RC1206FR-07133KL) carry moisture-resistant specifications instead.

Frequently Asked Questions (FAQ)

Q: Can I substitute ERJ-S08F1333V with ERJ-8ENF1333V? A: Yes, electrically and mechanically equivalent. However, ERJ-8ENF1333V is marked "Not For New Designs." Use only if supply constraints or design continuity requirements apply.

Q: What is the difference between automotive-qualified and moisture-resistant variants? A: Automotive-qualified parts (AEC-Q200) meet automotive reliability standards. Moisture-resistant variants meet general industrial moisture resistance specifications. Both are electrically equivalent for the 133 kOhms ±1% 0.25W 1206 specification.

Q: Are all substitute parts pin-compatible? A: Yes. All parts use the 1206 (3216 Metric) package with 2 terminations. Physical dimensions vary slightly (length 0.122" to 0.126", height 0.024" to 0.030") but remain within standard 1206 package tolerances and are PCB footprint compatible.

Q: Which substitute has the best availability? A: RC1206FR-07133KL (YAGEO) has the highest inventory at 50,344 units. CR1206-FX-1333ELF (Bourns) has 19,960 units. Both are in active production.

Q: Do all substitutes meet RoHS and MSL requirements? A: Yes. All listed substitutes are ROHS3 compliant with MSL 1 (unlimited) rating, matching the original part specifications.

Q: Can I use these substitutes in automotive applications? A: Parts with AEC-Q200 certification (ERJ-S08F1333V, ERJ-8ENF1333V, CRCW1206133KFKEA, RMCF1206FT133K) are qualified for automotive use. Non-certified variants (CR1206-FX-1333ELF, RC1206FR-07133KL) are suitable for general industrial applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message