ERJ-S08F11R0V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F11R0V is a 11 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The product is currently active and available in high volume. Equivalent and substitute parts are necessary when the primary part is unavailable, when design requirements demand alternative certifications or features, or when supply chain optimization requires component standardization across multiple manufacturers.

Key Parameters

Parameter	Value
Resistance	11 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F11R0V is determined by strict equivalence across the following critical parameters: resistance value (11 Ohms), tolerance (±1%), package type (1206), composition (thick film), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C). All substitute parts listed maintain these core electrical and mechanical specifications. Secondary considerations include product status (active vs. not for new designs), automotive qualification (AEC-Q200), and specific features such as anti-sulfur coating, moisture resistance, or pulse withstanding capability. Parts are grouped by manufacturer and feature set while maintaining full electrical and dimensional compatibility.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	Temp Coeff	Operating Temp	AEC-Q200	Product Status	Features
ERJ-S08F11R0V	Panasonic	11 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	Anti-Sulfur
ERJ-8ENF11R0V	Panasonic	11 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Not For New Designs	None Listed
AC1206FR-0711RL	YAGEO	11 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	Moisture Resistant
CR1206-FX-11R0ELF	Bourns Inc.	11 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	No	Active	Moisture Resistant
CRCW120611R0FKEA	Vishay Dale	11 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	None Listed
CRCW120611R0FKEAHP	Vishay Dale	11 Ω	±1%	0.75W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	Pulse Withstanding
RC1206FR-0711RL	YAGEO	11 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	No	Active	Moisture Resistant
RMCF1206FT11R0	Stackpole Electronics Inc	11 Ω	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	None Listed

Engineering Selection Recommendations

For direct replacement in active designs, select from parts with Active product status and matching 0.25W power rating: AC1206FR-0711RL (YAGEO), CRCW120611R0FKEA (Vishay Dale), or RMCF1206FT11R0 (Stackpole Electronics Inc). All three maintain full electrical equivalence and are currently in production.

For automotive applications requiring AEC-Q200 qualification, the following parts are qualified: ERJ-S08F11R0V (primary), AC1206FR-0711RL, CRCW120611R0FKEA, and RMCF1206FT11R0. The ERJ-8ENF11R0V carries AEC-Q200 qualification but is marked Not For New Designs and should be avoided in new product development.

For applications requiring higher power dissipation capability, CRCW120611R0FKEAHP provides 0.75W rating while maintaining all other electrical parameters and AEC-Q200 qualification. This part is suitable for designs with increased thermal stress requirements.

CR1206-FX-11R0ELF (Bourns Inc.) and RC1206FR-0711RL (YAGEO) lack AEC-Q200 qualification and are suitable only for non-automotive applications where moisture resistance is the primary requirement.

Frequently Asked Questions (FAQ)

Q: Can CRCW120611R0FKEAHP be used as a direct replacement for ERJ-S08F11R0V?

A: CRCW120611R0FKEAHP is electrically compatible and maintains the same resistance, tolerance, package, and temperature specifications. However, it has a higher power rating (0.75W vs. 0.25W). This substitution is valid when the circuit design permits the higher power rating. The part is AEC-Q200 qualified and suitable for automotive applications.

Q: What is the difference between ERJ-S08F11R0V and ERJ-8ENF11R0V?

A: Both parts are manufactured by Panasonic and share identical electrical specifications (11 Ohms ±1%, 0.25W, 1206 package, AEC-Q200). The primary difference is product status: ERJ-S08F11R0V is Active, while ERJ-8ENF11R0V is marked Not For New Designs. ERJ-8ENF11R0V should not be used in new product development.

Q: Are all substitute parts RoHS3 compliant?

A: Yes, all listed substitute parts are ROHS3 compliant and REACH unaffected, matching the environmental compliance of the primary part.

Q: Which substitute parts do not have AEC-Q200 qualification?

A: CR1206-FX-11R0ELF (Bourns Inc.) and RC1206FR-0711RL (YAGEO) are not AEC-Q200 qualified. These parts are suitable for industrial and consumer applications but should not be used in automotive designs requiring automotive qualification.

Q: What is the significance of the anti-sulfur feature on ERJ-S08F11R0V?

A: The anti-sulfur coating on ERJ-S08F11R0V provides enhanced protection in environments with sulfur-containing contaminants. Substitute parts without this specific feature may not provide equivalent protection in such environments. Verify application requirements before substitution.

Q: Can moisture-resistant variants be used interchangeably with the primary part?

A: Moisture-resistant variants (AC1206FR-0711RL, CR1206-FX-11R0ELF, RC1206FR-0711RL) are electrically and mechanically compatible with ERJ-S08F11R0V. The moisture-resistant feature is an enhancement that does not affect substitution eligibility. Selection depends on application environment requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message