ERJ-S08F1153V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1153V is a 115 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The part is currently in active production status with 1100 units in stock.

Substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design flexibility permits equivalent alternatives that meet identical electrical and mechanical specifications.

Substiute Parts

ERJ-S08F1153V

Panasonic Electronic ComponentsIn Stock: 1133ERJ-S08F1153V Datasheet

Current PartRFQ

ERJ-8ENF1153V

Panasonic Electronic ComponentsIn Stock: 87609ERJ-8ENF1153V Datasheet

SimilarRFQ

CRCW1206115KFKEA

Vishay DaleIn Stock: 32417CRCW1206115KFKEA Datasheet

SimilarRFQ

CRCW1206115KFKEAHP

Vishay DaleIn Stock: 19797CRCW1206115KFKEAHP Datasheet

SimilarRFQ

RC1206FR-07115KL

YAGEOIn Stock: 41181RC1206FR-07115KL Datasheet

SimilarRFQ

RMCF1206FT115K

Stackpole Electronics IncIn Stock: 4866RMCF1206FT115K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F1153V is determined by strict equivalence across the following parameters:

• Resistance value: 115 kOhms
• Tolerance: ±1%
• Package / Case: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Compliance: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical requirements. Variations in power rating (0.25W vs. 0.75W), specific feature sets (anti-sulfur vs. pulse withstanding), and product status (Active vs. Not For New Designs) are noted in the comparison table below and must be evaluated against application requirements.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain electrical and mechanical equivalence to the ERJ-S08F1153V across resistance, tolerance, package, temperature coefficient, and operating temperature range.

For applications requiring automotive qualification, CRCW1206115KFKEA, CRCW1206115KFKEAHP, and RMCF1206FT115K are active production parts with AEC-Q200 certification. The ERJ-8ENF1153V, while electrically equivalent, carries "Not For New Designs" status and should be reserved for legacy system support or maintenance applications only.

The CRCW1206115KFKEAHP variant offers increased power rating (0.75W vs. 0.25W) and pulse withstanding capability, suitable for applications with higher transient stress requirements. The RC1206FR-07115KL provides moisture-resistant construction without automotive qualification, appropriate for non-automotive industrial environments.

Selection should prioritize active production status parts (CRCW1206115KFKEA, CRCW1206115KFKEAHP, RC1206FR-07115KL, RMCF1206FT115K) for new designs. Inventory availability and lead time considerations may influence final selection among qualified alternatives.

Frequently Asked Questions (FAQ)

Q: Can CRCW1206115KFKEAHP (0.75W) replace ERJ-S08F1153V (0.25W) in the same circuit?

A: Yes. The higher power rating of CRCW1206115KFKEAHP provides additional thermal margin and is electrically compatible. The part will operate safely in applications designed for 0.25W resistors. Physical dimensions differ slightly (3.10mm x 1.60mm vs. 3.20mm x 1.60mm length), requiring PCB layout verification.

Q: Is ERJ-8ENF1153V suitable for new product designs?

A: No. ERJ-8ENF1153V carries "Not For New Designs" status. This part should be used only for legacy system maintenance or repair. New designs must use active production alternatives: CRCW1206115KFKEA, CRCW1206115KFKEAHP, RC1206FR-07115KL, or RMCF1206FT115K