ERJ-S08F1103V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1103V is a 110 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for demanding automotive and industrial applications. The product is currently active and available in high volume inventory.

Substitute parts are necessary when the primary part becomes unavailable, when design requirements demand alternative certifications or enhanced performance characteristics, or when supply chain optimization requires qualified alternatives from different manufacturers.

Substiute Parts

ERJ-S08F1103V

Panasonic Electronic ComponentsIn Stock: 787ERJ-S08F1103V Datasheet

Current PartRFQ

ERJ-8ENF1103V

Panasonic Electronic ComponentsIn Stock: 43185ERJ-8ENF1103V Datasheet

SimilarRFQ

AC1206FR-07110KL

YAGEOIn Stock: 1761AC1206FR-07110KL Datasheet

SimilarRFQ

CR1206-FX-1103ELF

Bourns Inc.In Stock: 20730CR1206-FX-1103ELF Datasheet

SimilarRFQ

CRCW1206110KFKEA

Vishay DaleIn Stock: 14396CRCW1206110KFKEA Datasheet

SimilarRFQ

CRCW1206110KFKEAHP

Vishay DaleIn Stock: 16213CRCW1206110KFKEAHP Datasheet

SimilarRFQ

RC1206FR-07110KL

YAGEOIn Stock: 168481RC1206FR-07110KL Datasheet

SimilarRFQ

RMCF1206FG110K

Stackpole Electronics IncIn Stock: 4298RMCF1206FG110K Datasheet

SimilarRFQ

RMCF1206FT110K

Stackpole Electronics IncIn Stock: 1639RMCF1206FT110K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F1103V is determined by strict equivalence across the following critical parameters:

• Resistance value: 110 kOhms
• Tolerance: ±1%
• Package / Case: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

All substitute parts listed meet these core electrical and mechanical requirements. Variations in power rating, specific features (anti-sulfur, pulse withstanding, moisture resistant), and product status are noted but do not disqualify substitution when the primary parameters align. Packaging format (Tape & Reel vs. Cut Tape) and inventory levels are logistical considerations that do not affect electrical equivalence.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Status, AEC-Q200 Qualified)

For applications requiring automotive qualification and active product status, the following parts provide direct equivalence to ERJ-S08F1103V:

• CRCW1206110KFKEA (Vishay Dale) — Active status, AEC-Q200 qualified, standard 0.25W rating
• AC1206FR-07110KL (YAGEO) — Active status, AEC-Q200 qualified, standard 0.25W rating
• RMCF1206FG110K (Stackpole Electronics Inc) — Active status, AEC-Q200 qualified, standard 0.25W rating
• RMCF1206FT110K (Stackpole Electronics Inc) — Active status, AEC-Q200 qualified, standard 0.25W rating

Enhanced Performance Alternative

CRCW1206110KFKEAHP (Vishay Dale) — Active status, AEC-Q200 qualified, pulse withstanding capability. This part offers 0.75W power rating, providing additional thermal margin for high-stress applications. Electrical parameters remain equivalent; physical dimensions vary slightly.

Legacy Alternative (Not Recommended for New Designs)

ERJ-8ENF1103V (Panasonic) — Electrically equivalent but marked "Not For New Designs." Use only when existing inventory must be consumed or when design revision is not feasible.

Non-Automotive Alternatives

CR1206-FX-1103ELF (Bourns Inc.) and RC1206FR-07110KL (YAGEO) lack AEC-Q200 qualification. These parts are suitable only for non-automotive applications where automotive certification is not required.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF1103V replace ERJ-S08F1103V in new designs?

A: ERJ-8ENF1103V is electrically and mechanically equivalent but carries "Not For New Designs" status. It is suitable only for legacy product support or inventory consumption. For new designs, select from active-status alternatives: CRCW1206110KFKEA, AC1206FR-07110KL, RMCF1206FG110K, or RMCF1206FT110K.

Q: What is the difference between CRCW1206110KFKEA and CRCW1206110KFKEAHP?

A: Both are Vishay Dale parts with identical electrical specifications (110 kΩ, ±1%, AEC-Q200). The primary difference is power rating: CRCW1206110KFKEA is rated 0.25W, while CRCW1206110KFKEAHP is rated 0.75W with pulse withstanding capability. The higher-power variant has slightly different physical dimensions (0.122" L vs. 0.126" L). Select based on circuit power dissipation requirements.

Q: Are CR1206-FX-1103ELF and RC1206FR-07110KL suitable for automotive applications?

A: Both parts meet the core electrical and mechanical specifications but lack AEC-Q200 automotive qualification. They are suitable for industrial, consumer, and non-safety-critical applications. For automotive use, select from AEC-Q200 qualified alternatives.

Q: Does packaging format (Tape & Reel vs. Cut Tape) affect electrical performance?

A: No. Packaging format is a logistical consideration only and does not affect electrical or mechanical performance. CRCW1206110KFKEA is available in Cut Tape & Digi-Reel format, while most other substitutes use standard Tape & Reel. Select based on assembly line requirements.

Q: Can I use a higher power-rated resistor as a substitute?

A: Yes. CRCW1206110KFKEAHP (0.75W) can replace ERJ-S08F1103V (0.25W) in any application. Higher power rating provides additional thermal margin and does not degrade performance in lower-power circuits. Verify PCB layout compatibility due to minor dimensional variations.

Q: What is the significance of anti-sulfur and moisture-resistant features?

A: ERJ-S08F1103V includes anti-sulfur coating; some substitutes (AC1206FR-07110KL, RC1206FR-07110KL, CR1206-FX-1103ELF) specify moisture-resistant construction. Both features enhance reliability in harsh environments. For applications in high-humidity or corrosive atmospheres, prioritize parts with these designations.