ERJ-S08F1101V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1101V is a 1.1 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for applications requiring high reliability in harsh environments. The product is currently active and available in high volume (860 pcs in stock).

Substitute parts are necessary when the primary part becomes unavailable, when alternative sourcing is required for supply chain resilience, or when design requirements permit equivalent specifications from qualified manufacturers.

Substiute Parts

ERJ-S08F1101V

Panasonic Electronic ComponentsIn Stock: 970ERJ-S08F1101V Datasheet

Current PartRFQ

ERJ-8ENF1101V

Panasonic Electronic ComponentsIn Stock: 63917ERJ-8ENF1101V Datasheet

SimilarRFQ

CRG1206F1K1

TE Connectivity Passive ProductIn Stock: 960CRG1206F1K1 Datasheet

DirectRFQ

AC1206FR-071K1L

YAGEOIn Stock: 6063AC1206FR-071K1L Datasheet

SimilarRFQ

CR1206-FX-1101ELF

Bourns Inc.In Stock: 14229CR1206-FX-1101ELF Datasheet

SimilarRFQ

CRCW12061K10FKEA

Vishay DaleIn Stock: 38107CRCW12061K10FKEA Datasheet

SimilarRFQ

CRCW12061K10FKEAHP

Vishay DaleIn Stock: 9163CRCW12061K10FKEAHP Datasheet

SimilarRFQ

CRCW12061K10FKEB

Vishay DaleIn Stock: 10987CRCW12061K10FKEB Datasheet

SimilarRFQ

RC1206FR-071K1L

YAGEOIn Stock: 2470RC1206FR-071K1L Datasheet

SimilarRFQ

RMCF1206FT1K10

Stackpole Electronics IncIn Stock: 31770RMCF1206FT1K10 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters:

• Resistance value: 1.1 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1 (Unlimited)

All listed substitute parts meet these core electrical and mechanical specifications. Variations in physical dimensions (length, width, height) within the 1206 package tolerance, manufacturer-specific features (anti-sulfur, moisture resistant, pulse withstanding), and product status are noted but do not disqualify substitution eligibility when electrical parameters are identical.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Status, AEC-Q200 Qualified)

For applications requiring automotive qualification and active product status, the following parts are direct equivalents:

• CRCW12061K10FKEA (Vishay Dale) — Active, AEC-Q200, highest inventory (38031 pcs)
• AC1206FR-071K1L (YAGEO) — Active, AEC-Q200, moisture resistant feature
• RMCF1206FT1K10 (Stackpole Electronics) — Active, AEC-Q200, high inventory (31727 pcs)

Secondary Substitutes (Active Status, Non-Automotive)

For applications where AEC-Q200 qualification is not required:

• CRG1206F1K1 (TE Connectivity) — Active, standard thick film
• CR1206-FX-1101ELF (Bourns Inc.) — Active, moisture resistant feature
• RC1206FR-071K1L (YAGEO) — Active, moisture resistant feature

Legacy/Transitional Parts

• ERJ-8ENF1101V (Panasonic) — Marked "Not For New Designs" but available in high volume (63899 pcs). Use only for legacy system maintenance or when supply constraints require it.
• CRCW12061K10FKEB (Vishay Dale) — Discontinued at DiGi Electronics but inventory remains available (10940 pcs). Suitable for existing designs only.

Higher Power Rating Alternative

• CRCW12061K10FKEAHP (Vishay Dale) — 0.75W rating (vs. 0.25W standard). Use only when circuit design permits higher power dissipation capability.

Frequently Asked Questions (FAQ)

Q: Can I use CRCW12061K10FKEAHP (0.75W) as a direct substitute for ERJ-S08F1101V (0.25W)?

A: Electrically, yes. The 0.75W part meets all core electrical specifications (1.1 kΩ, ±1%, 1206 package, AEC-Q200). The higher power rating provides additional thermal margin and does not degrade circuit performance. However, verify that board layout and thermal design accommodate the slightly different physical dimensions (3.10mm L x 1.60mm W vs. 3.20mm L x 1.60mm W).

Q: What is the difference between ERJ-S08F1101V and ERJ-8ENF1101V?

A: Both are Panasonic 1.1 kΩ ±1% 1206 resistors with identical electrical specifications. ERJ-S08F1101V includes anti-sulfur coating and is marked Active. ERJ-8ENF1101V lacks the anti-sulfur feature and is marked "Not For New Designs." For new designs, use ERJ-S08F1101V. For legacy system support, ERJ-8ENF1101V is available in higher volume.

Q: Do all substitute parts have AEC-Q200 qualification?

A: No. AEC-Q200 qualification is present in ERJ-8ENF1101V, AC1206FR-071K1L, CRCW12061K10FKEA, CRCW12061K10FKEAHP, CRCW12061K10FKEB, and RMCF1206FT1K10. Parts without AEC-Q200 (CRG1206F1K1, CR1206-FX-1101ELF, RC1206FR-071K1L) are suitable for non-automotive applications or where automotive qualification is not required.

Q: Are there physical dimension differences between substitute parts?

A: Yes, minor variations exist within 1206 package tolerance. Length ranges from 3.10mm to 3.20mm; height ranges from 0.60mm to 0.75mm. All parts are mechanically compatible with standard 1206 footprints. Verify specific dimensions if board layout has tight constraints.

Q: Which substitute has the best availability?

A: CRCW12061K10FKEA (Vishay Dale) has the highest inventory at 38031 pcs, followed by ERJ-8ENF1101V (Panasonic) at 63899 pcs. However, ERJ-8ENF1101V is marked "Not For New Designs." For active products suitable for new designs, CRCW12061K10FKEA is the optimal choice for supply security.

Q: Can I mix different manufacturers in the same design?

A: Yes. All listed parts meet identical electrical specifications (1.1 kΩ, ±1%, 0.25W, 1206 package, ±100ppm/°C, -55°C to 155°C). Mixing manufacturers is acceptable for circuit function. However, for consistency in thermal behavior, manufacturing tolerances, and long-term reliability tracking, using a single manufacturer per design is recommended.