ERJ-S08F1072V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1072V is a 10.7 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This thick film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The part is currently active in production with 785 units in stock.

Substitute parts become necessary when the primary part faces supply constraints, extended lead times, or design flexibility requirements while maintaining equivalent electrical and mechanical performance across automotive-grade applications.

Key Parameters

Parameter	Value
Resistance	10.7 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Ratings	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F1072V is determined by strict equivalence across the following critical parameters:

Resistance value: 10.7 kOhms
Tolerance: ±1%
Power rating: 0.25W (1/4W)
Package: 1206 (3216 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
RoHS3 compliance
MSL rating: 1 (Unlimited)

All substitute parts listed below meet these electrical and mechanical specifications. Variations in physical dimensions (length, width, height) within the 1206 package tolerance and differences in specific feature sets (anti-sulfur vs. moisture resistant) do not affect functional interchangeability in circuit applications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Operating Temp	AEC-Q200	Product Status	Inventory (Pcs)
ERJ-S08F1072V	Panasonic Electronic Components	10.7 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	785
ERJ-8ENF1072V	Panasonic Electronic Components	10.7 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Not For New Designs	14663
CRCW120610K7FKEA	Vishay Dale	10.7 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	28797
RC1206FR-0710K7L	YAGEO	10.7 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	No	Active	8514
RMCF1206FG10K7	Stackpole Electronics Inc	10.7 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	20930
RMCF1206FT10K7	Stackpole Electronics Inc	10.7 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Yes	Active	899

Engineering Selection Recommendations

For applications requiring AEC-Q200 automotive qualification, the following parts are recommended as primary substitutes:

CRCW120610K7FKEA (Vishay Dale) offers the highest inventory availability at 28,797 units with active product status and full AEC-Q200 compliance. RMCF1206FG10K7 (Stackpole Electronics Inc) provides 20,930 units in stock with equivalent automotive qualification. Both parts maintain identical electrical specifications and 1206 package compatibility.

ERJ-8ENF1072V (Panasonic Electronic Components) is functionally equivalent but carries "Not For New Designs" status, making it suitable only for legacy system maintenance or existing production lines where design changes are not feasible.

RC1206FR-0710K7L (YAGEO) meets all electrical and mechanical requirements but lacks AEC-Q200 certification. This part is suitable for non-automotive applications or designs where automotive qualification is not mandated.

RMCF1206FT10K7 (Stackpole Electronics Inc) has limited inventory at 899 units and should be considered only when other options are unavailable.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF1072V be used as a direct replacement for ERJ-S08F1072V?

A: Yes, ERJ-8ENF1072V is electrically and mechanically equivalent. However, it carries "Not For New Designs" status. Use this part only for legacy system support or existing production continuity where design revision is not possible.

Q: What is the difference between CRCW120610K7FKEA and RMCF1206FG10K7?

A: Both parts are functionally identical in electrical performance and AEC-Q200 compliance. The primary difference is manufacturer (Vishay Dale vs. Stackpole Electronics Inc) and inventory availability. CRCW120610K7FKEA has significantly higher stock levels.

Q: Is RC1206FR-0710K7L suitable for automotive applications?

A: RC1206FR-0710K7L meets all electrical and mechanical specifications but does not carry AEC-Q200 certification. It is suitable for non-automotive or non-safety-critical applications. For automotive designs requiring AEC-Q200 compliance, use CRCW120610K7FKEA, RMCF1206FG10K7, or RMCF1206FT10K7.

Q: Are there physical dimension differences between substitute parts?

A: Minor variations exist within 1206 package tolerance. ERJ-S08F1072V and RMCF series measure 0.126" L × 0.063" W with 0.028" maximum height. CRCW120610K7FKEA measures 0.126" L × 0.063" W with 0.024" maximum height. RC1206FR-0710K7L measures 0.122" L × 0.063" W with 0.026" maximum height. These variations are within standard 1206 package specifications and do not affect PCB layout or assembly compatibility.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: MSL 1 indicates the lowest moisture sensitivity level. These parts require no special moisture control during storage, handling, or assembly. Standard warehouse conditions are sufficient.

Q: Can I mix different manufacturers in the same production batch?

A: Yes. All listed substitutes meet identical electrical specifications, tolerance, power rating, and package requirements. Mixed sourcing is permissible from a functional standpoint, though procurement and quality documentation practices should be reviewed with your supply chain team.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message