ERJ-S08F1070V Equivalent & Substitute Parts

Part Overview

The ERJ-S08F1070V is a 107 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications in automotive and industrial environments. The product is currently active and available in stock.

Substitute parts are necessary when the primary part becomes unavailable, when design requirements mandate alternative manufacturers for supply chain redundancy, or when specific feature sets (such as moisture resistance or alternative certifications) are required for particular applications.

Substiute Parts

ERJ-S08F1070V

Panasonic Electronic ComponentsIn Stock: 824ERJ-S08F1070V Datasheet

Current PartRFQ

ERJ-8ENF1070V

Panasonic Electronic ComponentsIn Stock: 51055ERJ-8ENF1070V Datasheet

SimilarRFQ

CRCW1206107RFKEA

Vishay DaleIn Stock: 8474CRCW1206107RFKEA Datasheet

SimilarRFQ

RC1206FR-07107RL

YAGEOIn Stock: 7765RC1206FR-07107RL Datasheet

SimilarRFQ

RMCF1206FT107R

Stackpole Electronics IncIn Stock: 10742RMCF1206FT107R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S08F1070V is determined by the following critical parameters:

• Electrical Specifications: Resistance value (107 Ohms), tolerance (±1%), and power rating (0.25W) must be identical
• Package Compatibility: 1206 (3216 Metric) package is mandatory for PCB footprint compatibility
• Composition: Thick film construction ensures consistent electrical performance
• Temperature Performance: Operating range of -55°C ~ 155°C and temperature coefficient of ±100ppm/°C must be maintained
• Compliance: RoHS3 compliance and MSL 1 rating are required for equivalent substitution
• Environmental Features: Automotive AEC-Q200 qualification or equivalent moisture resistance characteristics

All substitute parts listed meet these core electrical and mechanical parameters. Variations in specific features (such as anti-sulfur coating versus moisture resistance) do not affect functional equivalence within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: CRCW1206107RFKEA (Vishay Dale), RMCF1206FT107R (Stackpole Electronics), or RC1206FR-07107RL (YAGEO) are preferred substitutes. All three parts are in active product status with full compliance to RoHS3 and MSL 1 requirements. These parts maintain identical electrical specifications and package compatibility with the ERJ-S08F1070V.

Alternative Option: ERJ-8ENF1070V (Panasonic) is functionally equivalent but carries a "Not For New Designs" status. This part is suitable only for legacy system maintenance or replacement applications where the original part number must be maintained within the Panasonic ERJ series.

Compliance Consideration: All listed substitutes meet automotive AEC-Q200 qualification or equivalent moisture resistance characteristics, ensuring suitability for high-reliability applications. Selection between active-status alternatives should be based on supply chain availability and procurement lead times.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF1070V replace ERJ-S08F1070V in new designs? A: No. ERJ-8ENF1070V carries a "Not For New Designs" status and should be used only for legacy system maintenance. For new designs, select from CRCW1206107RFKEA, RMCF1206FT107R, or RC1206FR-07107RL.

Q: Are all substitute parts pin-compatible with the original ERJ-S08F1070V? A: Yes. All substitute parts use the 1206 (3216 Metric) package with identical footprint dimensions and two terminations, ensuring direct PCB compatibility.

Q: What is the difference between anti-sulfur coating and moisture resistance? A: Both features provide environmental protection. Anti-sulfur coating (ERJ-S08F1070V) protects against sulfur-containing atmospheres common in automotive environments. Moisture resistance (RC1206FR-07107RL) protects against humidity ingress. Both are suitable for automotive applications; selection depends on specific environmental exposure requirements.

Q: Do all substitutes meet automotive qualification standards? A: CRCW1206107RFKEA, RMCF1206FT107R, and ERJ-8ENF1070V carry AEC-Q200 automotive qualification. RC1206FR-07107RL does not list AEC-Q200 but meets equivalent moisture resistance and RoHS3 compliance for general industrial applications.

Q: What is the significance of MSL 1 rating? A: MSL 1 (Unlimited) indicates the component has unlimited shelf life and requires no special moisture control during storage or handling, simplifying logistics and inventory management.