ERJ-S06J911V Equivalent & Substitute Parts

Part Overview

The ERJ-S06J911V is a 910 Ohms ±5% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring high reliability in harsh environments. The product is currently active with 827 pieces in stock. Equivalent and substitute parts are identified based on matching electrical specifications, package dimensions, and compliance ratings to ensure direct circuit board compatibility.

Substiute Parts

ERJ-S06J911V

Panasonic Electronic ComponentsIn Stock: 880ERJ-S06J911V Datasheet

Current PartRFQ

ERJ-6GEYJ911V

Panasonic Electronic ComponentsIn Stock: 27876ERJ-6GEYJ911V Datasheet

SimilarRFQ

ERJ-P06J911V

Panasonic Electronic ComponentsIn Stock: 8457ERJ-P06J911V Datasheet

SimilarRFQ

CR0805-JW-911ELF

Bourns Inc.In Stock: 25281CR0805-JW-911ELF Datasheet

SimilarRFQ

CRCW0805910RJNEA

Vishay DaleIn Stock: 20955CRCW0805910RJNEA Datasheet

SimilarRFQ

ESR10EZPJ911

Rohm SemiconductorIn Stock: 4763ESR10EZPJ911 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are grouped into two categories based on allowed parameter variations:

Category 1: Direct Equivalents (Identical Electrical and Mechanical Specifications) Parts matching all key parameters: 910 Ohms resistance, ±5% tolerance, 0.125W power rating, 0805 package, ±200ppm/°C temperature coefficient, -55°C ~ 155°C operating range, and AEC-Q200 automotive qualification. These parts are interchangeable without circuit design modification.

Category 2: Higher Power Rating Substitutes (Uprated Power Capability) Parts with identical electrical specifications (resistance, tolerance, temperature coefficient, operating range) and package dimensions but with increased power ratings (0.5W or 0.4W). These parts provide enhanced thermal performance and pulse withstanding capability while maintaining full backward compatibility in circuits designed for lower power dissipation.

The following parameters determine substitution eligibility:

• Resistance value: 910 Ohms (mandatory match)
• Tolerance: ±5% (mandatory match)
• Package: 0805 (2012 Metric) (mandatory match)
• Temperature Coefficient: ±200ppm/°C (mandatory match)
• Operating Temperature: -55°C ~ 155°C (mandatory match)
• Composition: Thick Film (mandatory match)
• RoHS and MSL compliance (mandatory match)

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (No Circuit Modification Required): ERJ-6GEYJ911V, CRCW0805910RJNEA, and CR0805-JW-911ELF are direct electrical and mechanical equivalents. ERJ-6GEYJ911V and CRCW0805910RJNEA maintain full AEC-Q200 automotive qualification matching the original part. CR0805-JW-911ELF provides equivalent electrical performance with moisture-resistant construction but lacks AEC-Q200 rating; selection depends on application requirements.

For Enhanced Thermal Performance: ERJ-P06J911V (0.5W) and ESR10EZPJ911 (0.4W) are suitable substitutes when circuits require improved thermal margin or pulse withstanding capability. Both maintain AEC-Q200 qualification and all electrical parameters. These higher-rated parts are backward compatible in applications designed for the 0.125W ERJ-S06J911V, as they dissipate heat more efficiently at equivalent power levels.

Compliance Considerations: All substitute parts maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating. Parts with AEC-Q200 qualification (ERJ-6GEYJ911V, CRCW0805910RJNEA, ERJ-P06J911V, ESR10EZPJ911) are preferred for automotive and high-reliability applications. CR0805-JW-911ELF is suitable for non-automotive applications where AEC-Q200 is not required.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6GEYJ911V replace ERJ-S06J911V directly on the circuit board? A: Yes. Both parts share identical electrical specifications (910 Ohms ±5%, 0.125W), package dimensions (0805), temperature coefficient (±200ppm/°C), operating range (-55°C ~ 155°C), and AEC-Q200 qualification. No circuit modification is required.

Q: What is the difference between ERJ-S06J911V and ERJ-P06J911V? A: The primary difference is power rating: ERJ-S06J911V is rated 0.125W (1/8W) while ERJ-P06J911V is rated 0.5W (1/2W). All other electrical parameters are identical. ERJ-P06J911V provides enhanced thermal performance and pulse withstanding capability. Both are AEC-Q200 qualified and mechanically compatible in 0805 package.

Q: Is CR0805-JW-911ELF suitable for automotive applications? A: CR0805-JW-911ELF meets all electrical and package requirements but does not carry AEC-Q200 automotive qualification. It is suitable for industrial and consumer applications requiring moisture-resistant thick film construction. For automotive applications requiring AEC-Q200 certification, use ERJ-6GEYJ911V, CRCW0805910RJNEA, ERJ-P06J911V, or ESR10EZPJ911.

Q: Can I use a higher power-rated substitute like ESR10EZPJ911 (0.4W) in place of ERJ-S06J911V (0.125W)? A: Yes. Higher power-rated resistors are backward compatible in circuits designed for lower power dissipation. ESR10EZPJ911 maintains all electrical parameters (910 Ohms ±5%, ±200ppm/°C, -55°C ~ 155°C) and improves thermal performance. Physical dimensions remain identical in 0805 package.

Q: Are all substitute parts available in the same packaging format? A: Yes. All listed substitute parts are supplied in Tape & Reel (TR) packaging in 0805 (2012 Metric) package format, ensuring compatibility with standard automated assembly equipment.

Q: What does AEC-Q200 qualification mean? A: AEC-Q200 is an automotive electronics council qualification standard for passive components. It certifies that parts meet stringent reliability, temperature cycling, and performance requirements for automotive applications. Parts with this rating are suitable for under-hood and high-stress automotive environments.