ERJ-S06J684V Equivalent & Substitute Parts

Part Overview

The ERJ-S06J684V is a 680 kOhms ±5% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur construction. The part is currently active in production with 737 units in stock. Equivalent and substitute parts are identified to support design flexibility, inventory management, and supply chain continuity.

Substiute Parts

ERJ-S06J684V

Panasonic Electronic ComponentsIn Stock: 812ERJ-S06J684V Datasheet

Current PartRFQ

ERJ-UP6J684V

Panasonic Electronic ComponentsIn Stock: 5880ERJ-UP6J684V Datasheet

UpgradeRFQ

ERJ-6GEYJ684V

Panasonic Electronic ComponentsIn Stock: 44931ERJ-6GEYJ684V Datasheet

SimilarRFQ

ERJ-P06J684V

Panasonic Electronic ComponentsIn Stock: 1164ERJ-P06J684V Datasheet

SimilarRFQ

ERJ-P6WF6803V

Panasonic Electronic ComponentsIn Stock: 1131ERJ-P6WF6803V Datasheet

SimilarRFQ

ERJ-P6WJ684V

Panasonic Electronic ComponentsIn Stock: 5263ERJ-P6WJ684V Datasheet

SimilarRFQ

CRCW0805680KJNEA

Vishay DaleIn Stock: 25454CRCW0805680KJNEA Datasheet

SimilarRFQ

RMCF0805JT680K

Stackpole Electronics IncIn Stock: 12859RMCF0805JT680K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06J684V are categorized based on electrical and mechanical compatibility within the 0805 package form factor. The primary substitution criteria are:

Electrical Parameters (Must Match):

• Resistance value: 680 kOhms
• Tolerance: ±5% (or tighter)
• Package / Case: 0805 (2012 Metric)
• Composition: Thick Film
• Operating temperature range: -55°C ~ 155°C minimum
• Temperature coefficient: ±200ppm/°C
• AEC-Q200 automotive rating
• RoHS3 compliance

Allowable Variations:

• Power rating: 0.125W (1/8W) or higher (0.5W / 1/2W acceptable as upgrades)
• Tolerance: ±5% or tighter (±1% acceptable)
• Packaging format: Tape & Reel (TR) or Cut Tape (CT)
• Manufacturer: Different manufacturers acceptable if all electrical and mechanical parameters align
• Anti-sulfur feature: Present in main part; absence in substitute acceptable if all other parameters match

Substitutes are grouped into two categories: direct equivalents (identical power rating and tolerance) and upgrades (higher power rating or tighter tolerance).

Parameter Comparison

Engineering Selection Recommendations

For Direct Equivalents (Identical Specifications):

• ERJ-6GEYJ684V (Panasonic): Active status, highest inventory (44,830 units), identical electrical and mechanical specifications to ERJ-S06J684V except anti-sulfur feature omitted. Suitable for applications where anti-sulfur construction is not required.
• CRCW0805680KJNEA (Vishay Dale): Active status, high inventory (25,440 units), identical specifications. Cross-manufacturer substitute with proven AEC-Q200 compliance.
• RMCF0805JT680K (Stackpole Electronics): Active status, inventory of 12,821 units, identical specifications. Alternative cross-manufacturer option.

For Power Rating Upgrades (0.5W / 1/2W):

• ERJ-UP6J684V (Panasonic): Active status, highest inventory among 0.5W variants (5,859 units). Recommended upgrade option with pulse withstanding capability and anti-sulfur construction.
• ERJ-P06J684V (Panasonic): Active status, available in Cut Tape packaging (1,103 units). Suitable for applications requiring higher power dissipation.

For Tighter Tolerance (±1%):

• ERJ-P6WF6803V (Panasonic): ±1% tolerance with 0.5W power rating. Product status is "Not For New Designs"; use only if existing designs require this specific part.

Parts to Avoid for New Designs:

• ERJ-P6WJ684V: Marked "Not For New Designs" despite adequate inventory.
• ERJ-P6WF6803V: Marked "Not For New Designs" despite adequate inventory.

Frequently Asked Questions (FAQ)

Q: Can I use ERJ-UP6J684V (0.5W) as a substitute for ERJ-S06J684V (0.125W)? A: Yes. The ERJ-UP6J684V is a direct electrical and mechanical substitute with higher power rating. A higher power rating does not compromise circuit performance in applications designed for 0.125W. This is an upgrade that provides additional thermal margin.

Q: What is the difference between Tape & Reel and Cut Tape packaging? A: Both are suitable for automated assembly. Tape & Reel is standard for high-volume production. Cut Tape is used for lower-volume orders or manual assembly. Electrical and mechanical specifications are identical.

Q: Can I substitute CRCW0805680KJNEA (Vishay Dale) for ERJ-S06J684V (Panasonic)? A: Yes. Both parts have identical resistance, tolerance, power rating, package, operating temperature, and AEC-Q200 rating. Cross-manufacturer substitution is valid when all electrical and mechanical parameters match.

Q: Why is anti-sulfur construction important? A: Anti-sulfur construction prevents corrosion in high-sulfur environments. If your application does not require this feature, parts without anti-sulfur construction (such as ERJ-6GEYJ684V or CRCW0805680KJNEA) are acceptable substitutes.

Q: Should I use parts marked "Not For New Designs"? A: No. Parts with "Not For New Designs" status (ERJ-P6WJ684V, ERJ-P6WF6803V) should be used only for sustaining existing designs. For new designs, select from parts with "Active" status.

Q: What does ±1% tolerance mean compared to ±5%? A: ±1% tolerance provides tighter resistance accuracy than ±5%. A 680 kOhm resistor with ±1% tolerance will be between 673.2 kOhms and 686.8 kOhms, while ±5% allows 646 kOhms to 714 kOhms. Use ±1% only if circuit design requires this precision.

Q: Are all substitute parts AEC-Q200 rated? A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification, matching the main part specification.