ERJ-S06J683V 68kΩ 0805 Chip Resistor Equivalent & Substitute Parts

Part Overview

The ERJ-S06J683V is a 68 kΩ ±5% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part features anti-sulfur coating and automotive AEC-Q200 qualification, designed for automotive and industrial applications requiring enhanced reliability. The part is currently in active production status with 1077 units in stock.

Equivalent and substitute parts are necessary when the original part becomes unavailable, when design requirements demand higher power ratings or tighter tolerances, or when supply chain optimization requires alternative qualified sources from different manufacturers.

Key Parameters

Parameter	Value
Resistance	68 kΩ
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C to 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the ERJ-S06J683V is determined by the following criteria:

Direct Equivalents (identical electrical and mechanical specifications):

Same resistance value: 68 kΩ
Same tolerance: ±5%
Same power rating: 0.125W (1/8W)
Same package: 0805 (2012 Metric)
Same temperature coefficient: ±200ppm/°C
Same operating temperature range: -55°C to 155°C
Same composition: Thick Film

Upgrade Substitutes (higher power rating, same resistance and tolerance):

Resistance: 68 kΩ
Tolerance: ±5%
Power rating: 0.5W (1/2W) or higher
Package: 0805 (2012 Metric)
Temperature coefficient: ±200ppm/°C
Operating temperature range: -55°C to 155°C

Tighter Tolerance Substitutes (±1% tolerance, same or higher power):

Resistance: 68 kΩ
Tolerance: ±1%
Power rating: 0.5W (1/2W) or higher
Package: 0805 (2012 Metric)
Temperature coefficient: ±200ppm/°C
Operating temperature range: -55°C to 155°C

Cross-Manufacturer Equivalents (different manufacturer, identical specifications):

All electrical parameters identical
Same package and physical dimensions
Equivalent or superior automotive/industrial certifications

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp (°C)	AEC-Q200	Product Status	Height Max (mm)
ERJ-S06J683V	Panasonic	68 kΩ	±5%	0.125	0805	±200ppm/°C	-55 to 155	Yes	Active	0.70
ERJ-UP6J683V	Panasonic	68 kΩ	±5%	0.5	0805	±200ppm/°C	-55 to 155	Yes	Active	0.70
ERJ-6GEYJ683V	Panasonic	68 kΩ	±5%	0.125	0805	±200ppm/°C	-55 to 155	Yes	Active	0.70
ERJ-P06J683V	Panasonic	68 kΩ	±5%	0.5	0805	±200ppm/°C	-55 to 155	Yes	Active	0.70
ERJ-P6WF6802V	Panasonic	68 kΩ	±1%	0.5	0805	±200ppm/°C	-55 to 155	Yes	Not For New Designs	0.75
ERJ-P6WJ683V	Panasonic	68 kΩ	±5%	0.5	0805	±200ppm/°C	-55 to 155	Yes	Not For New Designs	0.75
CR0805-JW-683ELF	Bourns Inc.	68 kΩ	±5%	0.125	0805	±200ppm/°C	-55 to 155	No	Active	0.60
CRCW080568K0JNEA	Vishay Dale	68 kΩ	±5%	0.125	0805	±200ppm/°C	-55 to 155	Yes	Active	0.50
ESR10EZPJ683	Rohm Semiconductor	68 kΩ	±5%	0.4	0805	±200ppm/°C	-55 to 155	Yes	Active	0.65
RMCF0805JT68K0	Stackpole Electronics Inc	68 kΩ	±5%	0.125	0805	±200ppm/°C	-55 to 155	Yes	Active	0.65

Engineering Selection Recommendations

For Direct Replacement (Active Production): ERJ-6GEYJ683V, CRCW080568K0JNEA, and RMCF0805JT68K0 are qualified direct replacements. All three maintain identical electrical specifications (68 kΩ ±5%, 0.125W) and package dimensions. CRCW080568K0JNEA and RMCF0805JT68K0 both carry AEC-Q200 automotive qualification equivalent to the original part. ERJ-6GEYJ683V is a Panasonic alternative within the same manufacturer family.

For Power Margin Applications: ERJ-UP6J683V, ERJ-P06J683V, and ESR10EZPJ683 provide increased power dissipation capability (0.5W, 0.5W, and 0.4W respectively) while maintaining the same 68 kΩ ±5% resistance specification. These are suitable when circuit design requires thermal margin or when the original 0.125W rating is marginal for the application. All three carry AEC-Q200 qualification.

For Tighter Tolerance Requirements: ERJ-P6WF6802V offers ±1% tolerance at 0.5W power rating. This part is marked "Not For New Designs" and should only be selected if existing inventory is available and design specifications explicitly require ±1% tolerance.

Avoid in New Designs: ERJ-P6WJ683V and ERJ-P6WF6802V are both marked "Not For New Designs." These parts should not be selected for new product development.

Cross-Manufacturer Selection: CR0805-JW-683ELF (Bourns) lacks AEC-Q200 qualification and is not recommended for automotive applications requiring this certification. Selection should be limited to non-automotive industrial applications where moisture-resistant thick film composition is sufficient.

Frequently Asked Questions (FAQ)

Q: Can ERJ-UP6J683V replace ERJ-S06J683V in all applications?

A: ERJ-UP6J683V is a direct electrical equivalent with identical resistance (68 kΩ), tolerance (±5%), and temperature characteristics. The higher power rating (0.5W vs. 0.125W) makes it suitable for all applications where the original part functions. Physical dimensions are identical (0805 package, 0.70mm max height). No design changes are required.

Q: What is the difference between ERJ-6GEYJ683V and ERJ-S06J683V?

A: Both parts are identical in all critical parameters: 68 kΩ ±5%, 0.125W, 0805 package, ±200ppm/°C temperature coefficient, -55°C to 155°C operating range, and AEC-Q200 qualification. The difference is the series designation (ERJ-6G vs. ERJ-S06). Both are active production parts from Panasonic and are fully interchangeable.

Q: Why would I select CRCW080568K0JNEA over the Panasonic equivalent?

A: CRCW080568K0JNEA (Vishay Dale) is functionally identical to ERJ-S06J683V and offers equivalent AEC-Q200 qualification. Selection may be driven by supply chain diversification, inventory availability (35,364 units in stock), or preferred supplier agreements. The slightly lower maximum height (0.50mm vs. 0.70mm) may provide marginal PCB assembly benefits in space-constrained designs.

Q: Is ERJ-P6WF6802V suitable for new product designs?

A: No. ERJ-P6WF6802V is marked "Not For New Designs." While it offers ±1% tolerance and 0.5W power rating, Panasonic has discontinued this series for new applications. Use ERJ-UP6J683V or ERJ-P06J683V for new designs requiring higher power or tighter tolerance specifications.

Q: Can I use CR0805-JW-683ELF in automotive applications?

A: CR0805-JW-683ELF (Bourns) does not carry AEC-Q200 automotive qualification. It is suitable only for non-automotive industrial applications. For automotive designs, select from AEC-Q200 qualified alternatives: ERJ-S06J683V, ERJ-UP6J683V, ERJ-6GEYJ683V, CRCW080568K0JNEA, ESR10EZPJ683, or RMCF0805JT68K0.

Q: What is the significance of the ±200ppm/°C temperature coefficient?

A: All listed substitutes maintain ±200ppm/°C temperature coefficient, identical to the original part. This specification defines the maximum resistance change per degree Celsius across the operating temperature range (-55°C to 155°C). Consistency across all alternatives ensures equivalent thermal stability in circuit performance.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are RoHS3 compliant and REACH unaffected, matching the environmental compliance status of ERJ-S06J683V. All parts carry MSL 1 (Unlimited) moisture sensitivity level.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message