Equivalent & Substitute Parts for ERJ-S06J680V

Part Overview

The Panasonic ERJ-S06J680V is a 68 Ohm ±5% 1/8W (0.125W) thick film chip resistor in 0805 (2012 Metric) package format. This component features anti-sulfur coating and automotive AEC-Q200 qualification, making it suitable for automotive and harsh environment applications. The part is currently in active production status with 723 units in stock.

Equivalent and substitute parts are necessary when the primary part number becomes unavailable, when design requirements demand upgraded specifications (such as higher power ratings or tighter tolerances), or when alternative manufacturers' components meet identical electrical and mechanical parameters.

Key Parameters

Parameter	Value
Resistance	68 Ohms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C to 155°C
Features	Anti-Sulfur, Automotive AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the ERJ-S06J680V are classified into three categories based on substitution compatibility:

Direct Substitutes (Panasonic ERJ-U06J680V): Identical electrical specifications (68Ω ±5%, 0.125W) and package format (0805). Same anti-sulfur coating and AEC-Q200 automotive qualification. Differs only in series designation and internal construction. This part is a direct pin-for-pin replacement with no design modifications required.

Upgraded Substitutes (ERJ-UP6J680V, ERJ-P06J680V, ERJ-P6WJ680V, ESR10EZPJ680): These parts maintain the 68Ω resistance, ±5% tolerance (or tighter), and 0805 package but feature higher power ratings (0.4W to 0.5W) and pulse withstanding capability. These are suitable when circuit design permits higher power dissipation or when enhanced reliability margins are required. All retain AEC-Q200 automotive qualification.

Similar Substitutes (ERJ-6GEYJ680V, CR0805-JW-680ELF, CRCW080568R0JNEA, RMCF0805JT68R0): These parts from Panasonic, Bourns, Vishay Dale, and Stackpole Electronics match the core electrical parameters (68Ω ±5%, 0.125W, 0805 package) and operating temperature range. Differences exist in specific features (anti-sulfur coating presence, height dimensions, or manufacturer-specific construction). All are AEC-Q200 qualified except CR0805-JW-680ELF, which carries moisture-resistant thick film construction.

Substitution is permitted when the following parameters remain constant or are upgraded: resistance value, tolerance, package format, operating temperature range, and compliance certifications (AEC-Q200 for automotive applications).

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	AEC-Q200	Product Status	Height Max (mm)
ERJ-S06J680V	Panasonic	68Ω	±5%	0.125	0805	±200ppm/°C	-55 to 155°C	Yes	Active	0.70
ERJ-U06J680V	Panasonic	68Ω	±5%	0.125	0805	±200ppm/°C	-55 to 155°C	Yes	Active	0.70
ERJ-UP6J680V	Panasonic	68Ω	±5%	0.5	0805	±200ppm/°C	-55 to 155°C	Yes	Active	0.70
ERJ-6GEYJ680V	Panasonic	68Ω	±5%	0.125	0805	±200ppm/°C	-55 to 155°C	Yes	Active	0.70
ERJ-P06J680V	Panasonic	68Ω	±5%	0.5	0805	±200ppm/°C	-55 to 155°C	Yes	Active	0.70
ERJ-P6WF68R0V	Panasonic	68Ω	±1%	0.5	0805	±200ppm/°C	-55 to 155°C	Yes	Not For New Designs	0.75
ERJ-P6WJ680V	Panasonic	68Ω	±5%	0.5	0805	±200ppm/°C	-55 to 155°C	Yes	Not For New Designs	0.75
CR0805-JW-680ELF	Bourns Inc.	68Ω	±5%	0.125	0805	±200ppm/°C	-55 to 155°C	No	Active	0.60
CRCW080568R0JNEA	Vishay Dale	68Ω	±5%	0.125	0805	±200ppm/°C	-55 to 155°C	Yes	Active	0.50
ESR10EZPJ680	Rohm Semiconductor	68Ω	±5%	0.4	0805	±200ppm/°C	-55 to 155°C	Yes	Active	0.65
RMCF0805JT68R0	Stackpole Electronics Inc	68Ω	±5%	0.125	0805	±200ppm/°C	-55 to 155°C	Yes	Active	0.65

Engineering Selection Recommendations

For Direct Replacement: Select ERJ-U06J680V when the primary part becomes unavailable. This Panasonic part maintains identical electrical and mechanical specifications with active production status and higher inventory availability (5991 units).

For Automotive Applications Requiring AEC-Q200: All recommended substitutes except CR0805-JW-680ELF carry AEC-Q200 automotive qualification. CR0805-JW-680ELF from Bourns is suitable only for non-automotive applications or where moisture resistance is the primary requirement over automotive certification.

For Enhanced Power Margin Designs: Select ERJ-UP6J680V, ERJ-P06J680V, or ESR10EZPJ680 when circuit design permits higher power dissipation (0.4W to 0.5W). These parts provide additional thermal margin and pulse withstanding capability while maintaining the same resistance and tolerance. All three carry active production status and AEC-Q200 qualification.

For Tighter Tolerance Requirements: ERJ-P6WF68R0V offers ±1% tolerance instead of ±5%, though it carries "Not For New Designs" status. This part should be used only in legacy designs or when existing inventory must be maintained.

For Cross-Manufacturer Sourcing: CRCW080568R0JNEA (Vishay Dale), RMCF0805JT68R0 (Stackpole Electronics), and CR0805-JW-680ELF (Bourns) provide alternative supply sources. CRCW080568R0JNEA and RMCF0805JT68R0 are recommended for automotive applications due to AEC-Q200 qualification and active production status.

Avoid for New Designs: ERJ-P6WF68R0V and ERJ-P6WJ680V are marked "Not For New Designs" and should be used only when maintaining existing production or legacy systems.

Frequently Asked Questions (FAQ)

Q: Can ERJ-U06J680V be used as a direct replacement for ERJ-S06J680V?

A: Yes. Both parts share identical electrical specifications (68Ω ±5%, 0.125W), package format (0805), operating temperature range (-55°C to 155°C), and AEC-Q200 automotive qualification. The difference lies in series designation and internal construction, but electrical performance is equivalent.

Q: What is the difference between the 0.125W and 0.5W versions?

A: Power rating indicates maximum continuous power dissipation. The 0.125W version (ERJ-S06J680V, ERJ-U06J680V) is suitable for circuits where resistor power dissipation does not exceed 125mW. The 0.5W versions (ERJ-UP6J680V, ERJ-P06J680V, ERJ-P6WJ680V) accommodate up to 500mW dissipation. Higher power ratings provide thermal margin but do not change electrical behavior at lower power levels. All maintain identical resistance and tolerance.

Q: Are all substitute parts AEC-Q200 qualified?

A: No. CR0805-JW-680ELF from Bourns does not carry AEC-Q200 qualification. It is suitable for general industrial applications but not recommended for automotive circuits requiring automotive-grade components. All other listed substitutes are AEC-Q200 qualified.

Q: Can I use a ±1% tolerance part (ERJ-P6WF68R0V) in place of a ±5% part (ERJ-S06J680V)?

A: Yes, from an electrical standpoint. Tighter tolerance (±1%) is a specification upgrade and will not cause circuit malfunction. However, ERJ-P6WF68R0V is marked "Not For New Designs" and should be used only for legacy system maintenance or existing production runs.

Q: What does "Not For New Designs" mean?

A: This designation indicates the manufacturer is phasing out the part. While the component remains available and functional, it should not be selected for new product designs. Use active production parts (ERJ-S06J680V, ERJ-U06J680V, ERJ-UP6J680V, ERJ-6GEYJ680V, ERJ-P06J680V) for new designs.

Q: Does package height matter when selecting a substitute?

A: Yes, in space-constrained applications. The main part ERJ-S06J680V has a maximum seated height of 0.70mm. Substitutes range from 0.50mm to 0.75mm. Verify PCB clearance and assembly equipment compatibility before selecting parts with different heights, particularly CRCW080568R0JNEA (0.50mm) or ERJ-P6WF68R0V and ERJ-P6WJ680V (0.75mm).

Q: Which substitute offers the best inventory availability?

A: ERJ-6GEYJ680V from Panasonic has the highest inventory (118,466 units), followed by RMCF0805JT68R0 from Stackpole Electronics (114,852 units). Both are active production parts with identical core specifications to the main part.

Q: Can I mix different manufacturers' parts in the same production run?

A: Yes, provided all parts meet the required electrical specifications (68Ω ±5%, 0.125W minimum, 0805 package) and compliance requirements (AEC-Q200 for automotive). However, verify that PCB assembly equipment and thermal profiles are compatible with all selected parts, particularly regarding height and composition differences.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message