ERJ-S06J431V Equivalent & Substitute Parts

Part Overview

The ERJ-S06J431V is a 430 Ohm ±5% 1/8W (0.125W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur protection. The part is currently active in production with 720 pieces in stock. Equivalent and substitute parts are identified when design requirements allow for alternative manufacturers or when higher power ratings are acceptable for the application.

Key Parameters

Parameter	Value
Resistance	430 Ohms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C to 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the ERJ-S06J431V is determined by strict equivalence in the following parameters: resistance value (430 Ohms), tolerance (±5%), package type (0805), composition (thick film), temperature coefficient (±200ppm/°C), and operating temperature range (-55°C to 155°C). All substitute parts listed maintain these core electrical and mechanical specifications.

Substitute parts are grouped into two categories based on power rating:

Category 1: Direct Equivalents (0.125W / 1/8W) Parts with identical power rating to the main part. These include ERJ-6GEYJ431V (Panasonic), CR0805-JW-431ELF (Bourns), CRCW0805430RJNEA (Vishay Dale), and RMCF0805JT430R (Stackpole Electronics). All maintain AEC-Q200 automotive qualification and ROHS3 compliance.

Category 2: Higher Power Rating (0.5W / 1/2W) ERJ-P06J431V (Panasonic) provides increased power dissipation capability while maintaining all other electrical parameters. This part is suitable for applications where the original 1/8W rating is insufficient but the same resistance and tolerance are required.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power Rating	Package	Temp Coeff	Operating Temp	AEC-Q200	RoHS3	MSL
ERJ-S06J431V	Panasonic	430 Ω	±5%	0.125W	0805	±200ppm/°C	-55°C to 155°C	Yes	Yes	1
ERJ-6GEYJ431V	Panasonic	430 Ω	±5%	0.125W	0805	±200ppm/°C	-55°C to 155°C	Yes	Yes	1
ERJ-P06J431V	Panasonic	430 Ω	±5%	0.5W	0805	±200ppm/°C	-55°C to 155°C	Yes	Yes	1
CR0805-JW-431ELF	Bourns Inc.	430 Ω	±5%	0.125W	0805	±200ppm/°C	-55°C to 155°C	No	Yes	1
CRCW0805430RJNEA	Vishay Dale	430 Ω	±5%	0.125W	0805	±200ppm/°C	-55°C to 155°C	Yes	Yes	1
RMCF0805JT430R	Stackpole Electronics Inc	430 Ω	±5%	0.125W	0805	±200ppm/°C	-55°C to 155°C	Yes	Yes	1

Engineering Selection Recommendations

For applications requiring AEC-Q200 automotive qualification, ERJ-6GEYJ431V, CRCW0805430RJNEA, and RMCF0805JT430R are direct substitutes with identical electrical and mechanical specifications to the ERJ-S06J431V. All three maintain ROHS3 compliance and MSL 1 rating.

CR0805-JW-431ELF from Bourns is electrically equivalent but does not carry AEC-Q200 certification. This part is suitable for non-automotive applications or where automotive qualification is not required.

ERJ-P06J431V is selected when the application requires higher power dissipation (0.5W versus 0.125W) while maintaining the same resistance value and tolerance. This part retains AEC-Q200 qualification and is suitable for designs where thermal margin is a consideration.

All substitute parts are ROHS3 compliant with MSL 1 rating, indicating unlimited shelf life under standard storage conditions.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P06J431V replace ERJ-S06J431V in any application? A: ERJ-P06J431V is a direct electrical substitute with higher power rating (0.5W versus 0.125W). It is physically compatible in the same 0805 package footprint. Use this part when the original design requires additional power dissipation capability or when thermal performance is a design constraint.

Q: Is CR0805-JW-431ELF suitable for automotive applications? A: CR0805-JW-431ELF does not carry AEC-Q200 certification. It is suitable for consumer and industrial applications but should not be used in designs requiring automotive qualification unless the application does not mandate AEC-Q200 compliance.

Q: Are all substitute parts pin-compatible with ERJ-S06J431V? A: Yes. All substitute parts use the 0805 (2012 Metric) package with identical footprint and two terminations. PCB layout compatibility is assured across all listed parts.

Q: What is the difference between ERJ-S06J431V and ERJ-6GEYJ431V? A: Both parts are manufactured by Panasonic with identical electrical specifications (430 Ω, ±5%, 0.125W, ±200ppm/°C). The primary difference is the series designation (ERJ-S06 versus ERJ-6G). Both are AEC-Q200 qualified and ROHS3 compliant. ERJ-6GEYJ431V has significantly higher inventory availability (141,693 pieces versus 720 pieces).

Q: Do all substitute parts meet ROHS3 compliance? A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 rating, indicating compliance with RoHS Directive 2011/65/EU and REACH regulations.

Q: What is the temperature coefficient significance for substitution? A: All substitute parts maintain ±200ppm/°C temperature coefficient and -55°C to 155°C operating range, matching the original part. This ensures equivalent performance across the full operating temperature range in automotive and industrial environments.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message