ERJ-S06J240V Equivalent & Substitute Parts

Part Overview

The ERJ-S06J240V is a 24 Ohm ±5% 1/8W (0.125W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is AEC-Q200 automotive qualified with anti-sulfur coating and operates across -55°C to 155°C. The part is active in production status with 1058 units currently in stock. Equivalent and substitute parts are identified when design requirements allow for variations in power rating, manufacturer, or specific feature sets while maintaining core electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	24 Ohms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following core parameters: resistance value (24 Ohms), tolerance (±5%), package type (0805 / 2012 Metric), composition (thick film), operating temperature range (-55°C ~ 155°C), and AEC-Q200 automotive qualification. Power rating may vary upward without functional impact when circuit design permits. Temperature coefficient variations within ±100ppm/°C to ±200ppm/°C are acceptable for general automotive applications. All substitute parts listed maintain these critical parameters and are ROHS3 compliant with MSL 1 rating.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Op Temp Range	Package	Height Max (mm)	AEC-Q200	Inventory
ERJ-S06J240V	Panasonic	24 Ω	±5%	0.125	±200	-55 ~ 155°C	0805	0.70	Yes	1058
ERJ-6GEYJ240V	Panasonic	24 Ω	±5%	0.125	±200	-55 ~ 155°C	0805	0.70	Yes	49475
CRCW080524R0JNEA	Vishay Dale	24 Ω	±5%	0.125	±200	-55 ~ 155°C	0805	0.50	Yes	20724
CRCW080524R0JNEAHP	Vishay Dale	24 Ω	±5%	0.5	±200	-55 ~ 155°C	0805	0.50	Yes	16573
ESR10EZPJ240	Rohm Semiconductor	24 Ω	±5%	0.4	±200	-55 ~ 155°C	0805	0.65	Yes	4612
RMCF0805JT24R0	Stackpole Electronics	24 Ω	±5%	0.125	±200	-55 ~ 155°C	0805	0.65	Yes	60664
RPC0805JT24R0	Stackpole Electronics	24 Ω	±5%	0.25	±200	-55 ~ 155°C	0805	0.60	Yes	1288
SR0805JR-7W24RL	YAGEO	24 Ω	±5%	0.25	±100	-55 ~ 155°C	0805	0.60	Yes	1592

Engineering Selection Recommendations

All listed substitute parts maintain active production status and full AEC-Q200 automotive qualification. Selection between equivalents depends on circuit power dissipation requirements and PCB layout constraints.

For direct 1:1 replacement with identical 0.125W power rating, ERJ-6GEYJ240V (Panasonic) and RMCF0805JT24R0 (Stackpole) are primary equivalents. ERJ-6GEYJ240V offers highest inventory availability (49475 units) within the same manufacturer family. RMCF0805JT24R0 provides equivalent electrical performance with 60664 units in stock.

For applications permitting higher power dissipation, CRCW080524R0JNEAHP (0.5W), ESR10EZPJ240 (0.4W), RPC0805JT24R0 (0.25W), and SR0805JR-7W24RL (0.25W) are suitable upgrades. These parts provide enhanced thermal margin and pulse withstanding capability while maintaining identical resistance, tolerance, and package dimensions.

CRCW080524R0JNEA (Vishay Dale, 0.125W) matches the original power rating with reduced maximum height (0.50mm vs 0.70mm), beneficial for space-constrained designs.

SR0805JR-7W24RL features a lower temperature coefficient (±100ppm/°C vs ±200ppm/°C), providing improved stability across the operating temperature range for precision applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6GEYJ240V directly replace ERJ-S06J240V?

A: Yes. Both parts share identical electrical specifications (24 Ω ±5%, 0.125W), operating temperature range (-55°C ~ 155°C), package (0805), and AEC-Q200 qualification. The primary difference is the series designation (ERJ-6G vs ERJ-S06). Both are Panasonic products with equivalent performance.

Q: What is the difference between 0.125W and 0.25W rated parts?

A: Power rating indicates maximum continuous power dissipation. A 0.25W part can safely dissipate twice the power of a 0.125W part. If circuit design requires only 0.125W dissipation, either rating is acceptable. Higher-rated parts provide thermal margin and are suitable for applications with potential power transients or thermal stress.

Q: Are all substitute parts automotive qualified?

A: Yes. All listed parts carry AEC-Q200 automotive qualification, meeting automotive reliability and environmental stress testing requirements.

Q: Does package height variation affect substitution?

A: Package height ranges from 0.50mm to 0.70mm maximum seated height. Verify PCB clearance and assembly equipment capabilities. Tighter height tolerance (0.50mm) may be required for specific applications. Consult design documentation for height constraints.

Q: What does temperature coefficient mean in resistor selection?

A: Temperature coefficient (ppm/°C) indicates resistance value change per degree Celsius. SR0805JR-7W24RL (±100ppm/°C) exhibits half the drift of other parts (±200ppm/°C) across temperature extremes, beneficial for precision analog circuits. For general automotive applications, both coefficients are acceptable.

Q: Are all parts ROHS3 compliant?

A: Yes. All listed parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, suitable for standard PCB assembly and storage conditions.

Q: Can I use a higher power-rated part in a design specified for 0.125W?

A: Yes, provided PCB layout and thermal design accommodate the part. Higher power ratings do not degrade performance in lower-power applications. Verify physical dimensions and height clearance match your design constraints.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message