ERJ-S06J201V Equivalent & Substitute Parts

Part Overview

The ERJ-S06J201V is a 200 Ohm ±5% 1/8W (0.125W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Panasonic Electronic Components. This part is rated for automotive applications under AEC-Q200 and features anti-sulfur construction. The part is active in production with 724 units currently in stock. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific requirements where alternative electrical or mechanical characteristics may be acceptable.

Key Parameters

Parameter	Value
Resistance	200 Ohms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±200ppm/°C
Operating Temperature Range	-55°C to 155°C
Automotive Rating	AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the ERJ-S06J201V is determined by the following critical parameters: resistance value (200 Ohms), tolerance (±5%), package type (0805), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C to 155°C), and automotive AEC-Q200 compliance. Substitute parts are grouped into two categories based on power rating:

Category 1: Direct Equivalents (0.125W / 1/8W) Parts with identical power rating to the main part. These include ERJ-6GEYJ201V (Panasonic), CR0805-JW-201ELF (Bourns), CRCW0805200RJNEA (Vishay Dale), and RMCF0805JT200R (Stackpole Electronics). All maintain the same electrical and thermal characteristics as the ERJ-S06J201V.

Category 2: Higher Power Rating Substitutes (0.4W to 0.5W) Parts with increased power dissipation capability: ERJ-P06J201V (0.5W, Panasonic), CRCW0805200RJNEAHP (0.5W, Vishay Dale), ESR10EZPJ201 (0.4W, Rohm Semiconductor), and RCS0805200RJNEA (0.5W, Vishay Dale). These parts are electrically equivalent but provide enhanced pulse withstanding and thermal performance. Higher power ratings are backward compatible for applications where the original 0.125W specification is not a limiting constraint.

All substitute parts maintain identical resistance, tolerance, package dimensions, temperature coefficient, operating temperature range, and AEC-Q200 automotive compliance.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	AEC-Q200	Features
ERJ-S06J201V	Panasonic	200 Ω	±5%	0.125	0805	±200ppm/°C	-55 to 155°C	Yes	Anti-Sulfur
ERJ-6GEYJ201V	Panasonic	200 Ω	±5%	0.125	0805	±200ppm/°C	-55 to 155°C	Yes	None Listed
CR0805-JW-201ELF	Bourns Inc.	200 Ω	±5%	0.125	0805	±200ppm/°C	-55 to 155°C	No	Moisture Resistant
CRCW0805200RJNEA	Vishay Dale	200 Ω	±5%	0.125	0805	±200ppm/°C	-55 to 155°C	Yes	None Listed
RMCF0805JT200R	Stackpole Electronics	200 Ω	±5%	0.125	0805	±200ppm/°C	-55 to 155°C	Yes	None Listed
ERJ-P06J201V	Panasonic	200 Ω	±5%	0.5	0805	±200ppm/°C	-55 to 155°C	Yes	Pulse Withstanding
CRCW0805200RJNEAHP	Vishay Dale	200 Ω	±5%	0.5	0805	±200ppm/°C	-55 to 155°C	Yes	Pulse Withstanding
ESR10EZPJ201	Rohm Semiconductor	200 Ω	±5%	0.4	0805	±200ppm/°C	-55 to 155°C	Yes	Pulse Withstanding
RCS0805200RJNEA	Vishay Dale	200 Ω	±5%	0.5	0805	±200ppm/°C	-55 to 155°C	Yes	Pulse Withstanding

Engineering Selection Recommendations

For applications requiring direct electrical and thermal equivalence to the ERJ-S06J201V, select from Category 1 direct equivalents: ERJ-6GEYJ201V, CRCW0805200RJNEA, or RMCF0805JT200R. All three maintain identical 0.125W power rating and AEC-Q200 automotive compliance. ERJ-6GEYJ201V offers the highest inventory availability (70,910 units). CRCW0805200RJNEA and RMCF0805JT200R provide alternative sourcing from Vishay Dale and Stackpole Electronics respectively.

For applications where increased power dissipation capability is beneficial or where pulse withstanding performance is required, Category 2 substitutes (0.4W to 0.5W) are electrically compatible. These parts maintain all critical electrical parameters while providing enhanced thermal margin. ERJ-P06J201V (Panasonic, 37,748 units) and CRCW0805200RJNEAHP (Vishay Dale, 8,800 units) offer 0.5W ratings with pulse withstanding features. ESR10EZPJ201 (Rohm Semiconductor, 57,103 units) provides 0.4W capability with pulse withstanding.

CR0805-JW-201ELF (Bourns) is a direct 0.125W equivalent with moisture resistant construction but lacks AEC-Q200 automotive certification. This part is suitable for non-automotive applications requiring moisture resistance.

All substitute parts are ROHS3 compliant, MSL 1 rated, and operate across the full -55°C to 155°C temperature range.

Frequently Asked Questions (FAQ)

Q: Can I use a higher power rating resistor (0.4W or 0.5W) as a substitute for the 0.125W ERJ-S06J201V?

A: Yes. Higher power rating resistors are electrically equivalent and backward compatible. The 0805 package accommodates all power ratings listed. Higher power ratings provide additional thermal margin and pulse withstanding capability without affecting circuit performance in applications where the original 0.125W specification is not a design constraint.

Q: Are all substitute parts AEC-Q200 automotive qualified?

A: All substitute parts except CR0805-JW-201ELF carry AEC-Q200 automotive qualification. CR0805-JW-201ELF is suitable for non-automotive applications only.

Q: Do substitute parts have identical physical dimensions?

A: All parts use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). Seated heights vary slightly (0.020" to 0.028"), but all are within standard 0805 package specifications and are PCB footprint compatible.

Q: What is the difference between anti-sulfur and standard thick film construction?

A: The ERJ-S06J201V features anti-sulfur construction, a specific material enhancement. Substitute parts without this designation use standard thick film composition. Both meet identical electrical specifications and temperature performance. Anti-sulfur construction provides additional protection in high-sulfur environments; standard thick film is suitable for standard industrial and automotive applications.

Q: Can I substitute the ERJ-S06J201V with CR0805-JW-201ELF?

A: CR0805-JW-201ELF is electrically equivalent with identical 0.125W power rating and ±200ppm/°C temperature coefficient. However, it lacks AEC-Q200 automotive certification and is not recommended for automotive applications. Use only in non-automotive designs where moisture resistance is required.

Q: Which substitute offers the best inventory availability?

A: ERJ-6GEYJ201V (Panasonic) offers the highest inventory with 70,910 units in stock, followed by ESR10EZPJ201 (Rohm Semiconductor) with 57,103 units and CR0805-JW-201ELF (Bourns) with 53,486 units.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message